Re: FT-847 PTT with wsjt-x not working #draws
toggle quoted messageShow quoted text
If you look at page 17 of the FT-847 Manual in the lower left corner, you will see the drive levels to use for transmit (pin 1). Use those values (HF digital on Yaesu usually uses the 1200 baud packet pins for TX/RX and likely the 1200 baud drive level.)
Use the procedure from the DRAWS™ Manager video. To set the level. For 40 mv, it should look like
If you have a second receiver the transmitted signal should sound like what you hear on the receiver when receiving the same mode. You could also use a scope to look at the signal on pin 1.
On the FT-847 there is also a data I/O stereo jack on the back of the radio (in addition to the packet port), see page 16 in the manual.
The FT-847 is a fine radio. I operated one for a few years, including using the 9600 baud packet port for a D-STAR receive capability. However, it is long out of production and that is why Yaesu no longer has support for it.
On Tue, Apr 30, 2019 at 2:08 PM okiejim <kd6vpe@...> wrote:
Thank you for all your work,