Re: How to bring "down" PTT?

Steve McGrane <temporarilyoffline@...>

The PTT line is 4.94v when the radio is on and the DRAWS/Pi is not

When the Pi comes on, the PTT line goes negative.

I have PTT line on draws connected to PTT line on Radio... but I'm thinking they both produce 5v and they should be connected in a crossover fashion?

On Mon, Jun 3, 2019 at 8:23 AM Bryan Hoyer <bhhoyer@...> wrote:
The PTT Output on DRAWS is an open collector NPN Transistor. It expects the Radio to have a pullup to Positive voltage, typically 5-12V.

If the PTT LED goes off then the SW has done its job.

Measure the voltage on PTT when yo power up, then again when you PTT and release.

Bryan K7UDR

Join to automatically receive all group messages.