toggle quoted messageShow quoted text
I had to re-run my setalsa-ft891.sh script and that reset the levels to something working. Been a while since I touched that.
On Tue, Jun 11, 2019 at 5:04 PM Basil Gunn <basil@...
> Is there anyway to run a command and get some test output?
To output an audio tone on either the left or right draws connector use
the measure_deviate.sh script. Documentation here:
Do these settings match the radio you are using?
ie. did you use John's web based draws-manager?
Steve McGrane <temporarilyoffline@...> writes:
> I'm not getting what I think would be the right audio in/out from the
> DRAWS. I've tried a second cable and the second port. I get some input,
> but not 100% and I get no output in FT8 or JS8Call. When I'm in FLDIGI, I
> get no waterfall, but I can hit the tuner function and it will transmit a
> tuning sound and my remote signal strength meter registers TX as well.