Re: Critical Mass


Matthew Pitts <daywalker_blade_2004@...>
 

As I said in the other thread, the only thing that is really proprietary about Winlink 2000 is the support for any form of Pactor; they do support Linux via the Open Source community; they just don't have the resources (meaning development staff) to do the work themselves and still maintain the Windows applications they are working on.

As far as lower cost interfaces to existing equipment goes, these things do already exist, but to my knowledge there is nothing currently available that will handle the higher speeds that the UDR56K is capable of out of the box; I know that Kantronics did have a 70 cm high speed packet radio at one time, but I don't know if that is still available brand new, and it wouldn't be able to do the newer digital voice and data modes without work as far as I know.

HSMM-MESH will work on more than just the Linksys WRT series, as far as I know; it just needs to have support for the CPU used in the specific router (code is likely available from the OpenWRT or DD-WRT code bases to do this). This will have to happen as the WRT54G routers that are supported become more difficult to find new. I know there are other routers that would be quite appropriate to use for this, even if they would need modifications that the currently supported ones don't require.

Matthew Pitts
N8OHU



From: "qrv@..."
To: UniversalDigitalRadio@...
Sent: Monday, September 3, 2012 11:38 AM
Subject: Re: [UniversalDigitalRadio] Critical Mass

 
This has probably been asked and answered but I could not find the
thread ...

Will there be a version of this which uses existing hardware?

I find it very difficult to believe that we could get sufficient
density of users at $395. (or even $200) each.

I get that some will be willing to pay for plug-n-play - and a
repeater installation needs to be simple and small - so the all-
in-one solution makes sense in those contexts.

An add-on device that functions like a TNC between computer and
existing rig - and is in the $75. - $125. range should result in
widespread adoption.

Our systems are impossibly fragmented right now so I'd anticipate
considerable interest in a cross-system OS-platform-independent
device and app that are affordable for users.

BTW: I received the two routers ($50. for the pair including
shipping) and had them up and running on HSMM-Mesh in a very
short time -- it's really simple!

The Winlink2000 folks are pushing rally hard, as have been the
D-Link folks, as they see non-proprietary alternatives coming
at them and they know they cannot compete.

IMHO, YMMV, 73 ...

----------------------------------------------------------
I would probably use the hsmm-mesh as the primary network transport and
the UDR56K as whichever secondary system I happened to need. I'm even
contemplating pairing the UDR56K with a USRP and some open source
software as an emergency telephone system for use until normal telephone
service can be restored to an affected area.

Matthew Pitts
N8OHU

--

Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22


Join main@nw-digital-radio.groups.io to automatically receive all group messages.