Date   
Current Beta & Beta7 Image's

Todd
 

What's the difference between the two? Also, can I load the image without having the HAT yet? Or should I wait?
Thanks,

Re: Current Beta & Beta7 Image's

 

It is the same file.  A script could always pull current beta and not need to know which beta number is current. 


On Mon, Jan 7, 2019, 15:33 Todd via Groups.Io <ic7461=yahoo.com@groups.io wrote:
What's the difference between the two? Also, can I load the image without having the HAT yet? Or should I wait?
Thanks,

delevery date #draws

mary laurent
 

Hi,
I would like to know the delivery date for draws hat?

best regards
Laurent
 

FLMSG / FLAMP

Dave Phelps
 

Are FLMSG and/or FLAMP included with the fldigi portion of the install?
Dave

Re: FLMSG / FLAMP

Gayland Gump
 

I didn't see them, but I also didn't look hard.

Gayland
KG7GCF


On Sat, Jan 19, 2019 at 6:36 PM Dave Phelps <dave.phelps@...> wrote:
Are FLMSG and/or FLAMP included with the fldigi portion of the install?
Dave

Re: FLMSG / FLAMP

 

They are on the to be added list.

Bryan K7UDR

Re: delevery date #draws

 

Looks like end of Jan first of Feb at this point.

Thanks,
Bryan K7UDR

Re: delevery date #draws

John MacDonald <john@...>
 

So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?

There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?

John MacDonald, K4BR
706-466-5646



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, January 21, 2019 11:28 AM, Bryan Hoyer <@K7UDR> wrote:

Looks like end of Jan first of Feb at this point.

Thanks,
Bryan K7UDR

Re: delevery date #draws

 

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald <john@...> wrote:

So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?

There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?

John MacDonald, K4BR
706-466-5646



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer <@K7UDR> wrote:

Looks like end of Jan first of Feb at this point.

Thanks,
Bryan K7UDR




Re: delevery date #draws

John MacDonald <john@...>
 

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, January 21, 2019 12:14 PM, Bryan Hoyer <@K7UDR> wrote:

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer @K7UDR wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR

Re: delevery date #draws

John MacDonald <john@...>
 

Just caught a mistake in the router .pdf: Range on both repeaters is 50 miles or about 85 km.

Sorry.

John




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, January 21, 2019 5:30 PM, John MacDonald <john@...> wrote:

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 12:14 PM, Bryan Hoyer @K7UDR wrote:

Yes John.
I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.
Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer @K7UDR wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR

Re: delevery date #draws

 

Looks good John,

I’m returning your original board because it has the 15 Pin Connector you need.

Bryan

On Jan 21, 2019, at 2:30 PM, John MacDonald <john@...> wrote:

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 12:14 PM, Bryan Hoyer <bhhoyer@...> wrote:

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@... wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR







<Netgear7800-portforwarding-January2019.JPG><Netgear7800-UDRC_router_settings-january2019.pdf>

Re: delevery date #draws

John MacDonald <john@...>
 

Thanks, Bryan!




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Tuesday, January 22, 2019 3:22 PM, Bryan Hoyer <bhhoyer@...> wrote:

Looks good John,

I’m returning your original board because it has the 15 Pin Connector you need.

Bryan

On Jan 21, 2019, at 2:30 PM, John MacDonald <john@...> wrote:

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 12:14 PM, Bryan Hoyer <bhhoyer@...> wrote:

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@... wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR







<Netgear7800-portforwarding-January2019.JPG><Netgear7800-UDRC_router_settings-january2019.pdf>

Re: delevery date #draws

Dave Phelps
 

Well, I'm getting kind of excited!
Dave

New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Steve Goyette
 

Hello,

VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the next couple of weeks).  As a result we've only been able to design this from the spec sheet.  The full design is on Thingiverse here https://www.thingiverse.com/thing:3387482

There are pictures there as well.

Would love any input you have on how to improve this design.

Thanks,

Steve and Kevin
VE7GOY/VE7KGV

Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Daniel Tickell
 

I am happy to print one of these up in the next day or so and give feedback :)


Daniel (KM6MZM)

On Mon, Jan 28, 2019 at 9:19 AM <steve@...> wrote:
Hello,

VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the next couple of weeks).  As a result we've only been able to design this from the spec sheet.  The full design is on Thingiverse here https://www.thingiverse.com/thing:3387482

There are pictures there as well.

Would love any input you have on how to improve this design.

Thanks,

Steve and Kevin
VE7GOY/VE7KGV

Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Steve Goyette
 

Awesome! Thank you!

Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Kenny Richards
 

Steve,

Could you forward the link to which LCD display you are using?

Thanks,

Kenny
KU7M

Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Steve Goyette
 
Edited

This is using the official Raspberry Pi 7" LCD touchscreen.  https://www.raspberrypi.org/products/raspberry-pi-touch-display/

Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

 

Will you offer the case for purchase?
Alex
WB1GNL




Sent from my Samsung Galaxy , an AT&T LTE smartphone

-------- Original message --------
From: steve@...
Date: 1/28/19 11:16 AM (GMT-05:00)
To: main@nw-digital-radio.groups.io
Subject: [nw-digital-radio] New Case for RPi, DRAWS and 7 inch LCD - Looking for testers

Hello,

VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the next couple of weeks).  As a result we've only been able to design this from the spec sheet.  The full design is on Thingiverse here https://www.thingiverse.com/thing:3387482

There are pictures there as well.

Would love any input you have on how to improve this design.

Thanks,

Steve and Kevin
VE7GOY/VE7KGV