Hi there, Forgive this NOOB question, I have just received the UDRC pi-hat and a brand new Raspberry PI3. My intent is to setup a dual VHF/UHF 1200/9600 APRS igate/digipeater. I am starting

What are you hooked up to, e.g. radio, repeater, etc. Start at the Wiki articles. https://nw-digital-radio.groups.io/g/udrc/wiki Then use the forums there. https://nw-digital-radio.groups.io/g/udrc

We made an attempt to get the UDRC board working on field day. We were not able to get it to decode on the receiver. I have INCLUDED the log. If anyone has any suggestion please advise. Thanks in

There are a couple of people working on Fusion support. What has been discovered is that Yaesu has some hybrid encoding in at least one mode that is not directly supported by the AMBE3000 chip. Yaesu

Does anybody know the status of the software to allow ThumbDV to support Fusion? Thanks.

John Hays posted: "John's Presentation at Hamvention®

New post on NW Digital

New post on NW Digital

Thanks, John.

http://nwdigitalradio.com/wp-content/uploads/2012/04/DV3000DS.pdf -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Is there a schematic or pinout available the PiDV / DV3000? I couldn't find it on the product website.

It is possible to make the connections (either a PiDV or just use a ThumbDV in one of the USB ports), but the applications to operate all of those protocols do not currently exist. The AMBE-3000 is

Would it be possible to attach the PiDV board to one of the vacant headers on the UDRC to make a board capable of receiving all AMBE3000R based protocols, connecting the beast to a VHF/UHF radio such

Would it be possible to attach the PiDV board to one of the vacant headers on the UDRC to make a board capable of receiving all AMBE3000R based protocols, connecting the beast to a VHF/UHF radio such

All, I would like to make something like the DV Mega dualband radio board on a R-PI using NW digital products. What is the hardware and software requirements? I am interested in DSTAR, C4FM and DMR

Re: Pi3 Wireless Dongle Re: Pi3 Wireless Dongle On Jun 2, 2016, at 4:20 PM, Corky Searls <af4pm@...> wrote: View on nw-digital-radio.groups.io

John, Since there seems to be a limited amount of documentation around the hardware supported here, could you please clarify if Compass supports wifi? In reading your response, and lack of mention

NW Digital Radio is in the process of setting up various community groups at Groups.io Please create a personal account at Groups.io Join the main NW Digital group by sending an email from your

There is a new Wiki entry on using the UDRC™ on packet radio with the direwolf soundcard TNC See: https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-and-Direwolf-Packet-Modem Using the

As it says at the top of http://nwdigitalradio.com/dv3000-ambeserver/ this is being refactored. AMBEserver is currently being built as part of DummyRepeater using the configure and make process ...