---------- Forwarded message ---------- From: ambe@... Notification <ambe+notification@...> Date: Sat, Jul 16, 2016 at 9:35 AM Subject: [ambe] New file uploaded to ambe@nw-digital-radio.groups.io To:

Dieter, This typically means you have another program running that has the UDRC mapped under ALSA. Make sure dstarrepeater/dstarrepaterd are stopped before running dstarrepeaterconfig. Also there is

Hi there, (small?) problem: - Software Configuration D-Star Repeater -> Sound Card Settings -> RX Device inactive grey - Software Configuration D-Star Repeater -> Sound Card Settings -> TX Device

https://drive.google.com/file/d/0By6mIaUV2StlZ1FLalJncTZkZ1k/view?usp=sharing

Does anyone have a copy of WinDV? The DutchStar site has been down and I would love a copy to use with my DVAP.

Has anyone tried using the UDR Digital controller to pass VOIP data to an IRLP node? I’ve got a PiIRLP that I’d really like to interconnect to my DX-1 and am wondering if I could connect the

The time is for local Mountain Time. (The invite used Pacific Time.)

Invitation: John - K7VE Presentation at Great Salt Lake Hamfest When: Saturday, 9 July 2016 1:30pm to 2:30pm America/Mountain Where: 9750 300 W, Sandy, UT 84070 (Salt Lake CC - Larry H Miller

Certainly a hotspot for D-STAR is possible -- https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-For-Simplex-Hotspots-and-Converted-Analog-Repeaters -- John D. Hays K7VE PO Box 1223,

There is not a complete application to accomplish all of these systems on NW Digital Radio products at this time. The UDRC and ThumbDV/PiDV could certainly be a part of such an application.

Peter, I am using the UDRC with a PI3 and the standard micro-USB supply that came with the PI3. Works just fine. No extra power supply connections required. pi@pi3:~ $ uname -a Linux pi3

I spoke with Fred about it and it will be back up shortly. There was a problem with the DNS. Don WB5EKU

New service is working well John. :) -- 73 de Tony VK3JED/VK3IRLhttp://vkradio.com

I would guess it is just down -- I think Fred monitors https://groups.yahoo.com/neo/groups/gmsk_dv_node/info BTW, this forum will be going away -- NW Digital Radio is in the process of setting up

Hello Peter, What kind of repeater are you using or is this a hot spot config? Further question: Are you using the 15 pin connection or the mini-din? Aug AG5AT

Might want to move this discussion over to the subgroup at https://nw-digital-radio.groups.io/g/udrc -- John D. Hays Director PO Box 1223, Edmonds, WA 98020-1223

It is not normal for the udrc to not be listed when you do an 'aplay -l' -- I am assuming you have completely removed power and reapplied it at some point. If, by chance, you have another Pi 2 or 3

HI Steve, Thanks for the quick reply, the micro-USB supply to the PI3 is 3A capable. The instructions are not that precise on whether the UDRC requires a separate supply, did I miss something

Does anyone have any information on the Dutch* Star Site? It's no longer available on the Web at http://dutch-star.eu/. Frank

Are you using a wall wart or the 12 volts on the UDRC? If the wall wart, is it a 2 amp or better? Just an idea...