The screen shot is in Files

I see no pictures... -- Tyler Griffiths N7UWX See where I am: http://map.findu.com/n7uwx-12

Don't read too much into the table entries. That system was set up for software testing using an external 1200 TNC on my existing 220 Gateway.

Look in Files

http://www.arrl.org/news/papers-requested-for-arrl-tapr-digital-communications-conference Papers Requested for ARRL/TAPR Digital Communications Conference 06/01/2012 Amateurs are invited to submit

Thanks for that. John EI7IG

Hi, Can we get any ideas on what processor architecture, amount of RAM and internal storage the device will have, please. Even the vaguest hints are welcome at this stage. I'm wondering if gnuradio

Hi Everybody, I know it's early days and all... and I'm probably thinking way too much this early on in development... I've been thinking of ways to control the UDR56K-4 without having a PC

I would recommend powering it separately (either directly or through a USB hub), but the USB connection is there and its a matter of having a driver (Debian Linux). A simple text based interface

In line. Marvell PXA168 Currently 256 MB, may be 512 MB in production, depending on price curve for memory microSD - probably 4 GB. It is user replaceable (not recommended), but not easily

The USB Ports are powered by a 12 to 5V buck regulator and specced for the full 500ma x 4 = 2A. Bryan

I would use a friendly arm to connect to the udr :P

NWDigtalRadio Video -- Se Ham Radio Now interview of Bryan Hoyer. And you can Subscribe to our Tweets... @NWDigitalRadio John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Good Morning, I am interested in your product and I would like to know were I could download the following: * complete toolchain that made the kernel and applications be compiled (gcc, binutils,

Hi John, Thanks for the info. I hadn't got my hopes up for using the rig as an SDR, but I was mostly curious about what software I might be able to run on it, and what other

As the product is still in active development, the information you need will not be released until a month or two after first customer shipped. Thanks for your patience. Bryan

Bryan, Thank you for the information. Would you foresee Amateur Community participation in future firmware releases? Jerry, KD4YAL

As Bryan stated, we will not be delivering any kernel patch or driver source code before product release. This code is under active development and test, and is often the case in such development it

I've been working on a port of Jonathan's gateway and pcrepeatercontroller software to the ARM processor for the coming UDR56K (http://nwdigitalradio.com) digital radio. It has been running for a

Where did you purchase the RaspberryPi in the USA? Can you send me a link to the ordering site? Thanks! Dennis -- Dennis, N5VRP n5vrp.satx@...