Purchased the case from C4, very nice. Cancel my preorder of aluminum case. Thanks

k7udr posted: "We do not have a definitive ship date for Aluminum Cases yet, as a few details are being worked out.Acrylic cases are available from C4Labs here:DRAWSCaseDRAWS Boards are in assembly

Follow up to https://nw-digital-radio.groups.io/g/udrc

Follow-up to https://nw-digital-radio.groups.io/g/udrc

Follow up in https://nw-digital-radio.groups.io/g/udrc

Please follow-up in subgroup for UDRC and DRAWS™

I've made a few contacts using PSK31. I have set the mode to DATA-U and FLDigi will make the change to the radio, then it (on its own) changes the screen to say AM-N instead. Does this happen to

Rather than fight the problem. I reinstalled the beta12 img and booted. Its working fine now. Thanks. Sometimes updates dont help. 73 Allen -- Even a man who is pure of heart and says his prayers at

Well did all the above and didnt get the results you showed from aplay -l. I got this instead: pi@WB7SWW:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0:

The draws driver is not loading. This can be caused by a couple of things. If you have done an 'apt-get update; apt-get upgrade' the AudioSense-Pi driver displaces the Draws driver. The position of

Output of showudrc.sh pi@WB7SWW:~ $ showurds.sh bash: showurds.sh: command not found pi@WB7SWW:~ $ showudrc.sh ==== Sound Card ==== No udrc sound card found. ==== Pi Ver ==== Pi 3 Model B+ Mfg by

Provide the console output of showudrc.sh Not an image or picture. I need to look at the text of the console. /Basil Allen Lee <alee@...> writes:

Since Ive had the DRAWS HAT I havent done much with the GPS part due to other things going on. But, in the last few days Ive worked on getting it going. However; even after supplying the board with

Hi Bruce, Your message has been forwarded to the right person at NW Digital Radio, who will contact you about your DRAWS™ HAT. The forums are indeed for help with general technical questions,

Webpage indicates to ask query tech support here. I has a draws hat that I had working and made contacts. I powered it up and saw smoke coming from the unit and now it won’t boot up. Can I get the

-- Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink: va7qu@... Subject://wl2k

I have plus others on YouTube. I thought yours were very helpful.

Be sure to check out my video on how I got all this to work: https://www.youtube.com/watch?v=5lxvVD1-0lk

If you haven't read this whole thread and watched the DRAWS™ Manager video, please do, there is a lot of good information available.

I am in the same boat as John.. Started with a fresh 32GB ultra plus micro card. installed current_beta.zip 2019-april-17. Followed the instructions as per the "NW-digital.radio.group.IO, wiki -