|
Re: DV Thumb Drive
Hi Jack,
As Published on the Shop Page, estimated ship date is end of April.
Thanks,
Bryan K7UDR
Hi Jack,
As Published on the Shop Page, estimated ship date is end of April.
Thanks,
Bryan K7UDR
|
By
Bryan Hoyer
·
#2367
·
|
|
DV Thumb Drive
Order one back on March 24, 2019. It is now April 15, 2019. Has anyone else ordered one of these and not received it yet? Just wondering what is taking so long. I have already paid for this item.
Order one back on March 24, 2019. It is now April 15, 2019. Has anyone else ordered one of these and not received it yet? Just wondering what is taking so long. I have already paid for this item.
|
By
Jack L. Blake Sr (AI4LL)
·
#2366
·
|
|
DRAWS GPS & FT8 Video inside
Latest Video, Fresh off the presses:
https://youtu.be/5lxvVD1-0lk
Prev. Videos:
WiFi Config, Updates, SSH and VNC
https://www.youtube.com/watch?v=3cSuYcbkKv4
Intro and SD Card
Latest Video, Fresh off the presses:
https://youtu.be/5lxvVD1-0lk
Prev. Videos:
WiFi Config, Updates, SSH and VNC
https://www.youtube.com/watch?v=3cSuYcbkKv4
Intro and SD Card
|
By
Steve McGrane <temporarilyoffline@...>
·
#2365
·
|
|
Re: Testing AX.25
#draws
Thank you. I am good to go. netstat works, mheard works, and that gets me through the verification process. I owe you an adult beverage.
The tail command output is much more copious than what I copied
Thank you. I am good to go. netstat works, mheard works, and that gets me through the verification process. I owe you an adult beverage.
The tail command output is much more copious than what I copied
|
By
David Lowry
·
#2364
·
|
|
Re: #draws
#draws
Here is an update. The coordinator has not gotten back to me on email after several attempts by me to help resolve his email to me. I went into direwolf and commented out the following lines.
IGSERVER
Here is an update. The coordinator has not gotten back to me on email after several attempts by me to help resolve his email to me. I went into direwolf and commented out the following lines.
IGSERVER
|
By
okiejim
·
#2363
·
|
|
Re: beacmin.sh vs btest.sh
David Lowry <huskyrunnr@...> writes:
Thanks.
If I could only spell nmea properly. Checked in a
David Lowry <huskyrunnr@...> writes:
Thanks.
If I could only spell nmea properly. Checked in a
|
By
Basil Gunn
·
#2362
·
|
|
Re: Testing AX.25
#draws
In file /etc/ax25/axports change the SSID of one the ports to something
other than -10 ie.
udr0 KE7RGP-9 9600 255 2 Direwolf port
udr1 KE7RGP-10 9600 255 2 Winlink port
then reboot and run netstat
In file /etc/ax25/axports change the SSID of one the ports to something
other than -10 ie.
udr0 KE7RGP-9 9600 255 2 Direwolf port
udr1 KE7RGP-10 9600 255 2 Winlink port
then reboot and run netstat
|
By
Basil Gunn
·
#2361
·
|
|
beacmin.sh vs btest.sh
After a git pull, in my hands, beacmin.sh works fine but btest.sh is sending invalid packets and complains when issued:
Raw packet from btest.sh
2019-04-13 22:55:33 EDT:
After a git pull, in my hands, beacmin.sh works fine but btest.sh is sending invalid packets and complains when issued:
Raw packet from btest.sh
2019-04-13 22:55:33 EDT:
|
By
David Lowry
·
#2360
·
|
|
Re: Testing AX.25
#draws
That's awesome! (SGI) I was doing structural biology.
pi@ke7rgpi:~ $ cat /etc/ax25/axports
# /usr/local/etc/ax25/axports
#
# The format of this file is:
#portname callsign speed paclen
That's awesome! (SGI) I was doing structural biology.
pi@ke7rgpi:~ $ cat /etc/ax25/axports
# /usr/local/etc/ax25/axports
#
# The format of this file is:
#portname callsign speed paclen
|
By
David Lowry
·
#2359
·
|
|
Re: Testing AX.25
#draws
David Lowry <huskyrunnr@...> writes:
You are doing great! You are getting me everything I need. We will have
the problem sorted out shortly.
My wife worked on SGI machines at the US Navel
David Lowry <huskyrunnr@...> writes:
You are doing great! You are getting me everything I need. We will have
the problem sorted out shortly.
My wife worked on SGI machines at the US Navel
|
By
Basil Gunn
·
#2358
·
|
|
Re: Testing AX.25
#draws
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
There are some complaints about both of these files /etc/ax25/axports /etc/ax25/ax25d.conf
Please send me the output of the
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
There are some complaints about both of these files /etc/ax25/axports /etc/ax25/ax25d.conf
Please send me the output of the
|
By
Basil Gunn
·
#2357
·
|
|
Re: Testing AX.25
#draws
Here is a direct copy/paste in case I'm attaching the wrong file format ore somesuch ...
pi@ke7rgpi:~ $ showudrc.sh
==== Sound Card ====
udrc card number line: card 0: udrc [udrc], device 0: Universal
Here is a direct copy/paste in case I'm attaching the wrong file format ore somesuch ...
pi@ke7rgpi:~ $ showudrc.sh
==== Sound Card ====
udrc card number line: card 0: udrc [udrc], device 0: Universal
|
By
David Lowry
·
#2356
·
|
|
Re: Testing AX.25
#draws
OK, I think the attached text file is what you asked for which I sent a bit ago. Here it is again. Sorry, I haven't been on unix-like system for over twenty years (SGI). If I'm doing this wrong, let
OK, I think the attached text file is what you asked for which I sent a bit ago. Here it is again. Sorry, I haven't been on unix-like system for over twenty years (SGI). If I'm doing this wrong, let
|
By
David Lowry
·
#2355
·
|
|
Re: Testing AX.25
#draws
David Lowry <huskyrunnr@...> writes:
No response from netstat --ax25 is a configuration error.
No. mheard displays ax.25 data.
type: man mheard for more info.
The following looks ok but I would
David Lowry <huskyrunnr@...> writes:
No response from netstat --ax25 is a configuration error.
No. mheard displays ax.25 data.
type: man mheard for more info.
The following looks ok but I would
|
By
Basil Gunn
·
#2354
·
|
|
Re: Testing AX.25
#draws
Should be able to fix that with console output request in previous message.
Send an example of what you are seeing.
My fault. This is fixed in the latest version of debug/btest.sh.
There is a
Should be able to fix that with console output request in previous message.
Send an example of what you are seeing.
My fault. This is fixed in the latest version of debug/btest.sh.
There is a
|
By
Basil Gunn
·
#2353
·
|
|
Re: Testing AX.25
#draws
Thanks for taking a look.
David, ke7rgp
Thanks for taking a look.
David, ke7rgp
|
By
David Lowry
·
#2352
·
|
|
Re: Testing AX.25
#draws
Please send me the console output of:
showudrc.sh
ax25status -d
When you see "lines 1-25 (END)" hit the space bar.
I need to fix that.
Thanks,
/Basil
David Lowry <huskyrunnr@...> writes:
Please send me the console output of:
showudrc.sh
ax25status -d
When you see "lines 1-25 (END)" hit the space bar.
I need to fix that.
Thanks,
/Basil
David Lowry <huskyrunnr@...> writes:
|
By
Basil Gunn
·
#2351
·
|
|
Re: Testing AX.25
#draws
Here, specifically is what I'm getting while following the "Testing AX.25" section of the "Verifying" step of Getting Started. I don't understand why these commands are not giving any response. Is the
Here, specifically is what I'm getting while following the "Testing AX.25" section of the "Verifying" step of Getting Started. I don't understand why these commands are not giving any response. Is the
|
By
David Lowry
·
#2350
·
Edited
|
|
Testing AX.25
#draws
I made it through the verification process and everything worked as expected except for the AX.25 tests.
ax25-status command gave the expected output but netstat --ax25 did not populate any sockets
I made it through the verification process and everything worked as expected except for the AX.25 tests.
ax25-status command gave the expected output but netstat --ax25 did not populate any sockets
|
By
David Lowry
·
#2349
·
|
|
Re: #draws
#draws
I messed up the file name. The extension should be .pcap (tcpdump formats the file appropriately for Wireshark to digest)
Steve, N9VW
I messed up the file name. The extension should be .pcap (tcpdump formats the file appropriately for Wireshark to digest)
Steve, N9VW
|
By
Steve, N9VW
·
#2347
·
|