|
Re: fldigi with DRAWS
#draws
#fldigi
After making my own cable to connect an IC-706 to the DRAWS, I think the hammadeparts.com cable is worth the price.
John K0MXL
After making my own cable to connect an IC-706 to the DRAWS, I think the hammadeparts.com cable is worth the price.
John K0MXL
|
By
John Amdor III
·
#2326
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
Ham Made Parts makes a cable -
Ham Made Parts makes a cable -
|
By
John D Hays - K7VE
·
#2325
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
The IC-7300 has only a 13 pin DIN connector. You would need create an adapter with the 13 pin DIN pigtail that came with the rig. If you no longer have (or never had) one, the MFJ-5213 will work for
The IC-7300 has only a 13 pin DIN connector. You would need create an adapter with the 13 pin DIN pigtail that came with the rig. If you no longer have (or never had) one, the MFJ-5213 will work for
|
By
Jack Spitznagel
·
#2324
·
|
|
Re: fusion on bluedv
#thumbdv
That would be a question for info@... -- also David frequents the AMBE subgroup https://nw-digital-radio.groups.io/g/ambe
The ThumbDV provides AMBE encoding/decoding but the various protocols
That would be a question for info@... -- also David frequents the AMBE subgroup https://nw-digital-radio.groups.io/g/ambe
The ThumbDV provides AMBE encoding/decoding but the various protocols
|
By
John D Hays - K7VE
·
#2323
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
It sounds like you're running the 7300 from its internal sound card (audio codec) via the USB port, rather than from the DRAWS hat. You must connect the DRAWS hat to the 6 pin mini-din on the rear of
It sounds like you're running the 7300 from its internal sound card (audio codec) via the USB port, rather than from the DRAWS hat. You must connect the DRAWS hat to the 6 pin mini-din on the rear of
|
By
Julian OH8STN <julian@...>
·
#2322
·
|
|
fusion on bluedv
#thumbdv
Hello,
Was wondering if fusion is working on DV3000 with bluedv yet?
I searched for posts however, nothing posted lately.
Tnx
Mike W8VPC
Hello,
Was wondering if fusion is working on DV3000 with bluedv yet?
I searched for posts however, nothing posted lately.
Tnx
Mike W8VPC
|
By
mike W8VPC
·
#2319
·
|
|
locked
Re: DRAWS + FT-891 + WSJT-X/FT8
Hi Steve.
Just to be clear, I have never gotten the Yaesu ft-891 to work well with the DRAWS hat. It works, but not without lots of noise. So weak signal digital work on HF isn't possible at the
Hi Steve.
Just to be clear, I have never gotten the Yaesu ft-891 to work well with the DRAWS hat. It works, but not without lots of noise. So weak signal digital work on HF isn't possible at the
|
By
Julian OH8STN <julian@...>
·
#2318
·
|
|
Re: DRAWs hat audio not working after Rpi update
Looks like that was it, thanks a lot Basil.
It's great you guys have these utilities ready to go. I'm going to spend some time in the n7nix/bin directory one of these evenings - and hopefully not
Looks like that was it, thanks a lot Basil.
It's great you guys have these utilities ready to go. I'm going to spend some time in the n7nix/bin directory one of these evenings - and hopefully not
|
By
john.chabalko@...
·
#2317
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
Look here:
https://github.com/nwdigitalradio/n7nix/blob/master/docs/IMAGE_README.md
Look for fldigi. I do not install it from a package because for Raspbian
stretch that will install fldigi version
Look here:
https://github.com/nwdigitalradio/n7nix/blob/master/docs/IMAGE_README.md
Look for fldigi. I do not install it from a package because for Raspbian
stretch that will install fldigi version
|
By
Basil Gunn
·
#2316
·
|
|
Re: DRAWs hat audio not working after Rpi update
You probably installed a competing tlv320aic32x4 driver from audiosense. Anna has fixed
that for future kernel releases.
update to latest scripts by doing this:
cd
cd n7nix
git pull
# The following
You probably installed a competing tlv320aic32x4 driver from audiosense. Anna has fixed
that for future kernel releases.
update to latest scripts by doing this:
cd
cd n7nix
git pull
# The following
|
By
Basil Gunn
·
#2315
·
|
|
locked
Re: DRAWS + FT-891 + WSJT-X/FT8
I have the same rig and have had it working great (until tonight when i ran a dist-upgrade ;) )
There's an FT-891 menu setup that you need to configure that i think will fix your transmit audio
I have the same rig and have had it working great (until tonight when i ran a dist-upgrade ;) )
There's an FT-891 menu setup that you need to configure that i think will fix your transmit audio
|
By
john.chabalko@...
·
#2314
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
Stick with the beta images and pre-installed applications using the startup instructions from Basil. Once you have a working install, then you can experiment with updates and changes.
Stick with the beta images and pre-installed applications using the startup instructions from Basil. Once you have a working install, then you can experiment with updates and changes.
|
By
John D Hays - K7VE
·
#2313
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
I’ll try that tomorrow. Thank you!
I’ll try that tomorrow. Thank you!
|
By
KeithG [KG1MD]
·
#2312
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
I’m new to the raspberry pi too but I think you’ve got to initiate the update yourself, or at least you could check
Assuming your rip is connected to the internet,
Shut down fldigi, and then in a
I’m new to the raspberry pi too but I think you’ve got to initiate the update yourself, or at least you could check
Assuming your rip is connected to the internet,
Shut down fldigi, and then in a
|
By
john.chabalko@...
·
#2311
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
I’m using a RPI 3 B+
After running the updater, it tells me that fldigi will be updated to 4.1.01, but that never happens. I’ve run the updater several times. Is there a step I’m missing?
I
I’m using a RPI 3 B+
After running the updater, it tells me that fldigi will be updated to 4.1.01, but that never happens. I’ve run the updater several times. Is there a step I’m missing?
I
|
By
KeithG [KG1MD]
·
#2310
·
|
|
Re: DRAWs hat audio not working after Rpi update
1 more:
appi@n3ap-p:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio
1 more:
appi@n3ap-p:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio
|
By
john.chabalko@...
·
#2309
·
|
|
DRAWs hat audio not working after Rpi update
I ran a late night dist-upgrade last night on my card running the draws image (i know, i know)
Everything appears to work correctly except each of the programs that use audio are complaining of no
I ran a late night dist-upgrade last night on my card running the draws image (i know, i know)
Everything appears to work correctly except each of the programs that use audio are complaining of no
|
By
john.chabalko@...
·
#2308
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
Something you could try to narrow it down - although i doubt it'll show much - is to disconnect the radio from the pi, run fldigi for a period of time and see if it goes unresponsive, and then
Something you could try to narrow it down - although i doubt it'll show much - is to disconnect the radio from the pi, run fldigi for a period of time and see if it goes unresponsive, and then
|
By
john.chabalko@...
·
#2307
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
I am only connecting through the USB port and that works great with all the other software. Fldigi is the only one that freezes after working fine for a few minutes.
I am only connecting through the USB port and that works great with all the other software. Fldigi is the only one that freezes after working fine for a few minutes.
|
By
KeithG [KG1MD]
·
#2306
·
|
|
locked
DRAWS + FT-891 + WSJT-X/FT8
Trying to get WSJT-X working for the next video. Details First, Questions at the end.
Radio: Yaesu FT-891
CAT control works over USB
Radio connected via LEFT Audio port (closest to GPS port)
RIGHT
Trying to get WSJT-X working for the next video. Details First, Questions at the end.
Radio: Yaesu FT-891
CAT control works over USB
Radio connected via LEFT Audio port (closest to GPS port)
RIGHT
|
By
Steve McGrane <temporarilyoffline@...>
·
#2305
·
|