|
Re: DRAWS Technical Documents
The RTC is an integrated part of the GPS and not addressed separately.
The battery is to preserve values when power is removed. The battery can provide a cumalative 40 days of backup power before
|
The RTC is an integrated part of the GPS and not addressed separately.
The battery is to preserve values when power is removed. The battery can provide a cumalative 40 days of backup power before
|
By
John D Hays - K7VE
·
#2298
·
|
|
Re: DRAWS Technical Documents
The RTC battery is mentioned in the wiki here:
DRAWS: Setup GPSD for Time and Position
https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%E2%84%A2%3A-Setup-GPSD-for-Time-and--Position
* Battery CR
|
The RTC battery is mentioned in the wiki here:
DRAWS: Setup GPSD for Time and Position
https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%E2%84%A2%3A-Setup-GPSD-for-Time-and--Position
* Battery CR
|
By
Basil Gunn
·
#2297
·
|
|
Re: DRAWS Technical Documents
Glad to find the tech doc. Is the spec for the RTC backup battery there? I didn't see it. Glad to see the 6 pin mini-DINs compatible w ICOM and Yaesu.
Thank you,
|
Glad to find the tech doc. Is the spec for the RTC backup battery there? I didn't see it. Glad to see the 6 pin mini-DINs compatible w ICOM and Yaesu.
Thank you,
|
By
Michael Starling
·
#2296
·
|
|
Re: RPi / DRAWs Connectivity in the Field and at Home
#draws
#field
#networking
#avahi
I've got this working, it does exactly what i was looking for. It will join my home Wifi when i'm at home, and if my home wifi is unavailable (eg: i'm out somewhere) it'll configure a static IP
|
I've got this working, it does exactly what i was looking for. It will join my home Wifi when i'm at home, and if my home wifi is unavailable (eg: i'm out somewhere) it'll configure a static IP
|
By
john.chabalko@...
·
#2294
·
|
|
Re: Using a PiDrive with Draws HatUsing a PiDrive with Draws Hat
Howdy all,
Here's an update. I received my pi3B+ and hooked up my draw hat. I did not use the 12 volt power I used the Pi power instead. I have a working Xastir station now. So not sure if I really
|
Howdy all,
Here's an update. I received my pi3B+ and hooked up my draw hat. I did not use the 12 volt power I used the Pi power instead. I have a working Xastir station now. So not sure if I really
|
By
okiejim
·
#2293
·
|
|
Re: DRAWS
You'll probably want to hear from someone who's doing this but i think if you want to do that you'll want to use Xastir - which is part of the DRAWs image i think. but to monitor the APRS packets i
|
You'll probably want to hear from someone who's doing this but i think if you want to do that you'll want to use Xastir - which is part of the DRAWs image i think. but to monitor the APRS packets i
|
By
john.chabalko@...
·
#2292
·
|
|
Re: DRAWS
John,
I primarily want to monitor the radio and its APRS function. I would like to access the APRS Log and be able to change APRS parameter to include
the embedded greeting message. I do not want it
|
John,
I primarily want to monitor the radio and its APRS function. I would like to access the APRS Log and be able to change APRS parameter to include
the embedded greeting message. I do not want it
|
By
Fred Hirsch <Hirschfh@...>
·
#2291
·
|
|
Re: fldigi with DRAWS
#draws
#fldigi
My guess is you’ve got the PTT configuration incorrect. Some of the apps I checked had it defaulted to VOX mode, once I changed to CAT it worked fine (you could also configure your radio to accept
|
My guess is you’ve got the PTT configuration incorrect. Some of the apps I checked had it defaulted to VOX mode, once I changed to CAT it worked fine (you could also configure your radio to accept
|
By
john.chabalko@...
·
#2290
·
Edited
|
|
Re: RPi / DRAWs Connectivity in the Field and at Home
#draws
#field
#networking
#avahi
You can put more than one network stanza in wpa_supplicant.conf
|
You can put more than one network stanza in wpa_supplicant.conf
|
By
John D Hays - K7VE
·
#2289
·
|
|
Re: RPi / DRAWs Connectivity in the Field and at Home
#draws
#field
#networking
#avahi
The instructions Julian provided were excellent. Easy to follow and worked the first time. But if I read correctly, the original poster is needing a way to connect wirelessly to the home network, and
|
The instructions Julian provided were excellent. Easy to follow and worked the first time. But if I read correctly, the original poster is needing a way to connect wirelessly to the home network, and
|
By
John Roy
·
#2288
·
|
|
Re: DRAWS
What do you want to do with the D710G? If you want to run APRS you don't need to do anything, just plug your weather station into the radio, configure APRS in the D710 menus and you're rolling, no PI
|
What do you want to do with the D710G? If you want to run APRS you don't need to do anything, just plug your weather station into the radio, configure APRS in the D710 menus and you're rolling, no PI
|
By
john.chabalko@...
·
#2287
·
|
|
Re: DRAWS
Thank you found it and it is compatible. Which app would you use with the TM-D710G running APRS with a weather station?
Fred WB7BKM
|
Thank you found it and it is compatible. Which app would you use with the TM-D710G running APRS with a weather station?
Fred WB7BKM
|
By
Fred Hirsch <Hirschfh@...>
·
#2286
·
|
|
Re: DRAWS
Thanks John just what I need.
|
Thanks John just what I need.
|
By
Fred Hirsch <Hirschfh@...>
·
#2285
·
|
|
Re: DRAWS
Fred:
The TM-D710G does have a 6-pin DIN jack compatible with DRAWS. It's on
back panel of the radio unit and labeled DATA.
Thanks,
Steve Stroh N8GNJ
<Hirschfh@...> wrote:
--
Steve
|
Fred:
The TM-D710G does have a 6-pin DIN jack compatible with DRAWS. It's on
back panel of the radio unit and labeled DATA.
Thanks,
Steve Stroh N8GNJ
<Hirschfh@...> wrote:
--
Steve
|
By
Steve Stroh
·
#2284
·
|
|
Re: DRAWS
Hi Fred,
The mini-din 6 connector is common interface across vendors who provide a packet radio interface. Here is a diagram of the pinout from
|
Hi Fred,
The mini-din 6 connector is common interface across vendors who provide a packet radio interface. Here is a diagram of the pinout from
|
By
John D Hays - K7VE
·
#2283
·
|
|
Re: DRAWS
Mr. Hirsch,
Please check out Ham Made Parts at hammadeparts.com. Les, WY0GTR, has many of the cables already. He adds more as they are requested.
Ed Bloom, KD9FRQ
ewbloom@...
Sent from Webmail
|
Mr. Hirsch,
Please check out Ham Made Parts at hammadeparts.com. Les, WY0GTR, has many of the cables already. He adds more as they are requested.
Ed Bloom, KD9FRQ
ewbloom@...
Sent from Webmail
|
By
Ed Bloom, KD9FRQ
·
#2282
·
|
|
Re: DRAWS
John,
I have a Kenwood TM-D710G and several ICOM HF rigs. None have a 6 pin jack. So you recommend that I fabricate a plug to match the pin config with of the supplied 6 pin cables.
Did you supply a
|
John,
I have a Kenwood TM-D710G and several ICOM HF rigs. None have a 6 pin jack. So you recommend that I fabricate a plug to match the pin config with of the supplied 6 pin cables.
Did you supply a
|
By
Fred Hirsch <Hirschfh@...>
·
#2281
·
|
|
ThumbDV - AMBEServer
#thumbdv
Hi
I have a ThumbDV running at 460K.
It runs fine with AMBEServer in half duplex mode sending either SPEECH packet or CHANNEL packet.
I am sending companded 160 byte audio packets and get back the
|
Hi
I have a ThumbDV running at 460K.
It runs fine with AMBEServer in half duplex mode sending either SPEECH packet or CHANNEL packet.
I am sending companded 160 byte audio packets and get back the
|
By
andyw999@...
·
#2280
·
|
|
Re: Using a PiDrive with Draws HatUsing a PiDrive with Draws Hat
I'm not an expert but I believe it will work on the PiDrive as long as you use the PiDrive power instead of the 12 volt supply. My new Pi3B+ should be in by this weekend. I will try my draws on it and
|
I'm not an expert but I believe it will work on the PiDrive as long as you use the PiDrive power instead of the 12 volt supply. My new Pi3B+ should be in by this weekend. I will try my draws on it and
|
By
okiejim
·
#2279
·
|
|
Re: RPi / DRAWs Connectivity in the Field and at Home
#draws
#field
#networking
#avahi
I'd be happy to help you troubleshoot Douglas. For this sort of thing whether you have the DRAWs hat or not won't matter, this is simply a rpi/linux networking configuration.
Do you have access to
|
I'd be happy to help you troubleshoot Douglas. For this sort of thing whether you have the DRAWs hat or not won't matter, this is simply a rpi/linux networking configuration.
Do you have access to
|
By
john.chabalko@...
·
#2278
·
|
