I ran a late night dist-upgrade last night on my card running the draws image (i know, i know) Everything appears to work correctly except each of the programs that use audio are complaining of no

Something you could try to narrow it down - although i doubt it'll show much - is to disconnect the radio from the pi, run fldigi for a period of time and see if it goes unresponsive, and then

I am only connecting through the USB port and that works great with all the other software. Fldigi is the only one that freezes after working fine for a few minutes.

Trying to get WSJT-X working for the next video. Details First, Questions at the end. Radio: Yaesu FT-891 CAT control works over USB Radio connected via LEFT Audio port (closest to GPS port) RIGHT

Congrats on getting through the setup portion! Sounds like you're only connecting through USB? If you're not connecting through the ports on the draws to the radio, then it wouldn't be a draws

I burned the image to a chip, booted the pi/draws hat and had no trouble following the update instructions to update the software/system. I am using a monitor, keyboard and mouse directly connected to

https://youtu.be/3cSuYcbkKv4 More to come, We might even get on the air!

https://youtu.be/3cSuYcbkKv4 More to come, We might even get on the air!

nwdigital radio customer service rocks. Here's an update. I got the confidence boost I needed from NWdigital Radio and plugged the 12 volts in. My Draws Hat is working and there seems to be no

Hi Terence, All NWDR Products have a 30 day return policy. If no-one snags it, you may return it for a full refund: Use your order number as RMA and send it to: NW Digital Radio 245 Highlands

The RTC is an integrated part of the GPS and not addressed separately. The battery is to preserve values when power is removed. The battery can provide a cumalative 40 days of backup power before

The RTC battery is mentioned in the wiki here: DRAWS: Setup GPSD for Time and Position https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%E2%84%A2%3A-Setup-GPSD-for-Time-and--Position * Battery CR

Glad to find the tech doc. Is the spec for the RTC backup battery there? I didn't see it. Glad to see the 6 pin mini-DINs compatible w ICOM and Yaesu. Thank you,

I've got this working, it does exactly what i was looking for. It will join my home Wifi when i'm at home, and if my home wifi is unavailable (eg: i'm out somewhere) it'll configure a static IP

Howdy all, Here's an update. I received my pi3B+ and hooked up my draw hat. I did not use the 12 volt power I used the Pi power instead. I have a working Xastir station now. So not sure if I really

You'll probably want to hear from someone who's doing this but i think if you want to do that you'll want to use Xastir - which is part of the DRAWs image i think. but to monitor the APRS packets i

John, I primarily want to monitor the radio and its APRS function. I would like to access the APRS Log and be able to change APRS parameter to include the embedded greeting message. I do not want it

My guess is you’ve got the PTT configuration incorrect. Some of the apps I checked had it defaulted to VOX mode, once I changed to CAT it worked fine (you could also configure your radio to accept

You can put more than one network stanza in wpa_supplicant.conf

The instructions Julian provided were excellent. Easy to follow and worked the first time. But if I read correctly, the original poster is needing a way to connect wirelessly to the home network, and