|
Re: Draws Analog to digital transcoding
#draws
Jim
I'll have to consider the power requirements for a PC I already have 5 Raspberry Pi's running at the site for everything from mmdvm to eEchoIRLP, APRS Plus the repeater and AirFiber bridge from
|
Jim
I'll have to consider the power requirements for a PC I already have 5 Raspberry Pi's running at the site for everything from mmdvm to eEchoIRLP, APRS Plus the repeater and AirFiber bridge from
|
By
N9UMJ
·
#2176
·
|
|
Re: Draws Analog to digital transcoding
#draws
You do have to use a computer running Windows to run the BlueDV program so far as I know. I only found the Beta version that utilized the AMBE3000 USB dongle. I used an old desktop with Win7 at the
|
You do have to use a computer running Windows to run the BlueDV program so far as I know. I only found the Beta version that utilized the AMBE3000 USB dongle. I used an old desktop with Win7 at the
|
By
Jim Brown <w5zit@...>
·
#2175
·
|
|
Re: Draws Analog to digital transcoding
#draws
Jim
That sounds exactly what I'm wanting to do, I don' want them linked full time, only for nets and severe weather.
Is there plans or instructions how your was configured or do you have a config.
|
Jim
That sounds exactly what I'm wanting to do, I don' want them linked full time, only for nets and severe weather.
Is there plans or instructions how your was configured or do you have a config.
|
By
N9UMJ
·
#2174
·
|
|
Re: Draws Analog to digital transcoding
#draws
I used the BlueDVWindows program in a beta release for the AMBE3000. I did not use the DRAWS system, but did build an interface to allow the RS-232 control lines to signal PTT and SQ to my analog
|
I used the BlueDVWindows program in a beta release for the AMBE3000. I did not use the DRAWS system, but did build an interface to allow the RS-232 control lines to signal PTT and SQ to my analog
|
By
Jim Brown <w5zit@...>
·
#2173
·
|
|
Draws Analog to digital transcoding
#draws
Hi All
Has anyone successfully used the Draws board with the Ambe 3000usb to create an Analog to Digital interface?
I'm wanting to create a means of trans-coding digital to analog and Analog back to
|
Hi All
Has anyone successfully used the Draws board with the Ambe 3000usb to create an Analog to Digital interface?
I'm wanting to create a means of trans-coding digital to analog and Analog back to
|
By
N9UMJ
·
#2172
·
|
|
Re: DRAWS™ Shipping Schedule
#draws
#shipping
We’ll open up orders for the Case in April.
Thanks,
Bryan
|
We’ll open up orders for the Case in April.
Thanks,
Bryan
|
By
Bryan Hoyer
·
#2171
·
|
|
Re: DRAWS™ Shipping Schedule
#draws
#shipping
Any word on the shields/covers. Be nice if they could be shipped at the same time to cut shipping cause to other countries.
73
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU VOICE
Winlink:
|
Any word on the shields/covers. Be nice if they could be shipped at the same time to cut shipping cause to other countries.
73
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU VOICE
Winlink:
|
By
Don Poaps
·
#2170
·
|
|
Re: DRAWS™ Shipping Schedule
#draws
#shipping
Nice.
By
Dave Phelps <dave.phelps@...>
·
#2169
·
|
|
DRAWS™ Shipping Schedule
#draws
#shipping
k7udr posted: "Components are in and we have a 5 day assembly turn scheduled for March 8th. We will begin shipping by order date, the week of the 11th and should have all backorders shipped by the
|
k7udr posted: "Components are in and we have a 5 day assembly turn scheduled for March 8th. We will begin shipping by order date, the week of the 11th and should have all backorders shipped by the
|
By
John D Hays - K7VE
·
#2168
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
With what tool was the design built? SolidWorks? Would you be willing to share the source files? I'd like to be able to adapt to different displays, mounting configurations and am Interested in
|
With what tool was the design built? SolidWorks? Would you be willing to share the source files? I'd like to be able to adapt to different displays, mounting configurations and am Interested in
|
By
Eric Osterberg
·
#2167
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
That's a nice display. It would be nice if the touchscreen model would be setup the same way.--
KI7LIK
Granada Estates Neighborhood Watch
|
That's a nice display. It would be nice if the touchscreen model would be setup the same way.--
KI7LIK
Granada Estates Neighborhood Watch
|
By
Douglas
·
#2166
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Jack Spitznagel <kd4iz@...> writes:
The display is a 12V display.
It also has a speaker so you can use Xastir audio alerts without having
an external speaker. The RPi with DRAWS hat attach to
|
Jack Spitznagel <kd4iz@...> writes:
The display is a 12V display.
It also has a speaker so you can use Xastir audio alerts without having
an external speaker. The RPi with DRAWS hat attach to
|
By
Basil Gunn
·
#2165
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
That's probably going to be the next major purchase for the fabrication section of my workbench, a good 3d printer. I'm tired of not being able to do things because I don't have a part, especially
|
That's probably going to be the next major purchase for the fabrication section of my workbench, a good 3d printer. I'm tired of not being able to do things because I don't have a part, especially
|
By
Gwen Patton
·
#2164
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
I recently got a new printer. A Prusa i3 mk3. I am working on learn Focus 360, I could use some assistance from more experienced modelers and printers.
Thanks,
Willie
N8WP
--
Willie
|
I recently got a new printer. A Prusa i3 mk3. I am working on learn Focus 360, I could use some assistance from more experienced modelers and printers.
Thanks,
Willie
N8WP
--
Willie
|
By
Willie - N8WP
·
#2163
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Hi Basil and Dave,
@Dave, your comments on the RPi screen are pretty much spot on. I had a
spare one in a "SmartiPi" case I have been using to test an early adopter
DRAWS board during the betas. I
|
Hi Basil and Dave,
@Dave, your comments on the RPi screen are pretty much spot on. I had a
spare one in a "SmartiPi" case I have been using to test an early adopter
DRAWS board during the betas. I
|
By
Jack Spitznagel
·
#2162
·
|
|
Re: DRAWS Image
Vince,
The question needs to be reversed :)
If Pi-STAR will work with a sound modem D-STAR repeater (e.g. dstarrepeater) and can be installed on the beta image provided, then yes. However, I don't
|
Vince,
The question needs to be reversed :)
If Pi-STAR will work with a sound modem D-STAR repeater (e.g. dstarrepeater) and can be installed on the beta image provided, then yes. However, I don't
|
By
John D Hays - K7VE
·
#2161
·
|
|
Re: DRAWS Image
Just a question Will The NWDigital Draws digital radio workstation HAT work with Pi-Star.
|
Just a question Will The NWDigital Draws digital radio workstation HAT work with Pi-Star.
|
By
Vince Gill
·
#2160
·
|
|
Re: DRAWS Image
Thank you.
KI7LIK
Granada Estates Neighborhood Watch
|
Thank you.
KI7LIK
Granada Estates Neighborhood Watch
|
By
Douglas
·
#2159
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
I am in agreement with you Dave.
The 7" Raspberry Pi 800 x 480 resolution touchscreen screens are much
too small for most (any) apps to work without a great deal of
frustration.
The 7" Sunfounder
|
I am in agreement with you Dave.
The 7" Raspberry Pi 800 x 480 resolution touchscreen screens are much
too small for most (any) apps to work without a great deal of
frustration.
The 7" Sunfounder
|
By
Basil Gunn
·
#2158
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Can't say anything about the case as I haven't even received a board yet, but I can chime in on he 7" raspi screen.
It's not big enough to do any serious work on. A lot of programs with GUIs can't
|
Can't say anything about the case as I haven't even received a board yet, but I can chime in on he 7" raspi screen.
It's not big enough to do any serious work on. A lot of programs with GUIs can't
|
By
Dave Phelps <dave.phelps@...>
·
#2157
·
|
