|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Steve and Kevin
Do you want to try it with my DRAWS? I am an early supporter in that I invest money, but I have not had time to even open the package.
We can trade back once yours arrive?
Fred
|
Steve and Kevin
Do you want to try it with my DRAWS? I am an early supporter in that I invest money, but I have not had time to even open the package.
We can trade back once yours arrive?
Fred
|
By
Fred Meier
·
#2135
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Nice looking case.
Do you have any experience adding acrylic rods so the TX LEDs can be see better with the case on?
Ed Bloom
ewbloom@...
Sent from Webmail access
|
Nice looking case.
Do you have any experience adding acrylic rods so the TX LEDs can be see better with the case on?
Ed Bloom
ewbloom@...
Sent from Webmail access
|
By
Ed Bloom, KD9FRQ
·
#2134
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
I really like your concept here. It would answer some of the issues that came up for me while using the SmartiPi Touch Case as far as access to microSD card and perhaps the HDMI port… I could not
|
I really like your concept here. It would answer some of the issues that came up for me while using the SmartiPi Touch Case as far as access to microSD card and perhaps the HDMI port… I could not
|
By
Jack Spitznagel
·
#2133
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Thanks!
By
Kenny Richards
·
#2132
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Will you offer the case for purchase?
Alex
WB1GNL
Sent from my Samsung Galaxy , an AT&T LTE smartphone
|
Will you offer the case for purchase?
Alex
WB1GNL
Sent from my Samsung Galaxy , an AT&T LTE smartphone
|
By
Alexander <alexgish3rd@...>
·
#2131
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
This is using the official Raspberry Pi 7" LCD touchscreen. https://www.raspberrypi.org/products/raspberry-pi-touch-display/
|
This is using the official Raspberry Pi 7" LCD touchscreen. https://www.raspberrypi.org/products/raspberry-pi-touch-display/
|
By
Steve Goyette
·
#2130
·
Edited
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Steve,
Could you forward the link to which LCD display you are using?
Thanks,
Kenny
KU7M
|
Steve,
Could you forward the link to which LCD display you are using?
Thanks,
Kenny
KU7M
|
By
Kenny Richards
·
#2129
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Awesome! Thank you!
By
Steve Goyette
·
#2128
·
|
|
Re: New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
I am happy to print one of these up in the next day or so and give feedback :)
Daniel (KM6MZM)
|
I am happy to print one of these up in the next day or so and give feedback :)
Daniel (KM6MZM)
|
By
Daniel Tickell <dtickell@...>
·
#2127
·
|
|
New Case for RPi, DRAWS and 7 inch LCD - Looking for testers
Hello,
VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the
|
Hello,
VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the
|
By
Steve Goyette
·
#2126
·
|
|
Re: delevery date
#draws
Well, I'm getting kind of excited!
Dave
|
Well, I'm getting kind of excited!
Dave
|
By
Dave Phelps <dave.phelps@...>
·
#2125
·
|
|
Re: delevery date
#draws
Thanks, Bryan!
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
Thanks, Bryan!
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
By
John MacDonald <john@...>
·
#2124
·
|
|
Re: delevery date
#draws
Looks good John,
I’m returning your original board because it has the 15 Pin Connector you need.
Bryan
|
Looks good John,
I’m returning your original board because it has the 15 Pin Connector you need.
Bryan
|
By
Bryan Hoyer
·
#2123
·
|
|
Re: delevery date
#draws
Just caught a mistake in the router .pdf: Range on both repeaters is 50 miles or about 85 km.
Sorry.
John
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
Just caught a mistake in the router .pdf: Range on both repeaters is 50 miles or about 85 km.
Sorry.
John
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
|
By
John MacDonald <john@...>
·
#2122
·
|
|
Re: delevery date
#draws
Okay, Bryan...
I hope all of the info you need is attached - One .pdf file and one .jpg file.
Please let me know if you need additional info.
Are you going to send an "old" UDRC or one of the new
|
Okay, Bryan...
I hope all of the info you need is attached - One .pdf file and one .jpg file.
Please let me know if you need additional info.
Are you going to send an "old" UDRC or one of the new
|
By
John MacDonald <john@...>
·
#2121
·
|
|
Re: delevery date
#draws
Yes John.
I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.
Bryan
|
Yes John.
I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.
Bryan
|
By
Bryan Hoyer
·
#2120
·
|
|
Re: delevery date
#draws
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add
|
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add
|
By
John MacDonald <john@...>
·
#2119
·
|
|
Re: delevery date
#draws
Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR
|
Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR
|
By
Bryan Hoyer
·
#2118
·
|
|
Re: FLMSG / FLAMP
They are on the to be added list.
Bryan K7UDR
|
They are on the to be added list.
Bryan K7UDR
|
By
Bryan Hoyer
·
#2117
·
|
|
Re: FLMSG / FLAMP
I didn't see them, but I also didn't look hard.
Gayland
KG7GCF
|
I didn't see them, but I also didn't look hard.
Gayland
KG7GCF
|
By
Gayland Gump
·
#2116
·
|
