|
Re: Motorola Quantar & digital modes
Mike,
what all was involved (hardware and configuration) in the “Frankenstein” setup using the Quantar for the Tx and the other radio for the Rx. I have 2 VHF Quantars and would love to be able to
|
Mike,
what all was involved (hardware and configuration) in the “Frankenstein” setup using the Quantar for the Tx and the other radio for the Rx. I have 2 VHF Quantars and would love to be able to
|
By
Roger
·
#2564
·
|
|
Re: Pi ft817 help please
BTW the CT-62 can be USB or Serial.
|
BTW the CT-62 can be USB or Serial.
|
By
John D Hays - K7VE
·
#2563
·
|
|
Re: Pi ft817 help please
Hi Andrew,
Apparently, the word DRAWS is an acronym for Digital Radio Amateur WorkStation. I know you and I would expect the first sentence after "What Is DRAWS?" to contain
|
Hi Andrew,
Apparently, the word DRAWS is an acronym for Digital Radio Amateur WorkStation. I know you and I would expect the first sentence after "What Is DRAWS?" to contain
|
By
WB7DFV
·
#2562
·
|
|
Re: Pi ft817 help please
Hi Andrew,
Please take a look at: http://nwdigitalradio.com/draws/
Good explanation and starting point.
The DRAWS + RPi combo works well with my FT-817.
KD4IZ
Jack Spitznagel
FM19oo
|
Hi Andrew,
Please take a look at: http://nwdigitalradio.com/draws/
Good explanation and starting point.
The DRAWS + RPi combo works well with my FT-817.
KD4IZ
Jack Spitznagel
FM19oo
|
By
Jack Spitznagel
·
#2561
·
|
|
Re: Pi ft817 help please
Thanks will do what does draw stand for?
|
Thanks will do what does draw stand for?
|
By
andy.howe31@...
·
#2560
·
|
|
Re: Pi ft817 help please
You want two leads. The mini-DIN 6 cable that comes with the DRAWS™ HAT (or any similar cable) and a CT-62 equivalent cable for CAT control. (many offered on eBay and Amazon).
Go into the UDRC and
|
You want two leads. The mini-DIN 6 cable that comes with the DRAWS™ HAT (or any similar cable) and a CT-62 equivalent cable for CAT control. (many offered on eBay and Amazon).
Go into the UDRC and
|
By
John D Hays - K7VE
·
#2559
·
|
|
Re: Pi ft817 help please
https://hammadeparts.com/ is a great place to get your cables. Yes, that means shipping from the US to the UK.
You fellow UK compatriots make know of a source in county.
|
https://hammadeparts.com/ is a great place to get your cables. Yes, that means shipping from the US to the UK.
You fellow UK compatriots make know of a source in county.
|
By
Ed Bloom, KD9FRQ
·
#2558
·
|
|
Pi ft817 help please
Help please,
Just got a pi4 I need the lead from the pi to yaesu817 but unsure which one I need,can someone help ?do I need a sound card for the pi relay am new to all this so baby steps and learning
|
Help please,
Just got a pi4 I need the lead from the pi to yaesu817 but unsure which one I need,can someone help ?do I need a sound card for the pi relay am new to all this so baby steps and learning
|
By
andy.howe31@...
·
#2557
·
|
|
Re: SECOND Request Re: [nw-digital-radio] [New post] Shipping Status Update
#draws
#case
#shipping
Ok but early adopters have old hats and old pis so where are those cases
|
Ok but early adopters have old hats and old pis so where are those cases
|
By
K4SPB
·
#2556
·
|
|
Re: Draws hat two weeks old defective
Thank you for your immediate response.
I will get it in the mail to you on Monday!
Great customer service!!
Sincerely,
Mike Narges WF8O
|
Thank you for your immediate response.
I will get it in the mail to you on Monday!
Great customer service!!
Sincerely,
Mike Narges WF8O
|
By
Michael Narges
·
#2555
·
|
|
DRAWS module compatabilities
Since the Yeasu DRx1,(thats what our club has on aire); is no longer in production. Will the DRAWS still be able to be set up for DRX2?
Al WB7SWW
|
Since the Yeasu DRx1,(thats what our club has on aire); is no longer in production. Will the DRAWS still be able to be set up for DRX2?
Al WB7SWW
|
By
Allen Lee
·
#2554
·
|
|
Re: Draws hat two weeks old defective
Hi Michael,
Send it to:
NE Digital Radio
RMA<order number>
245 Highlands Drive
Friday Harbor WA 98250
Thanks,
Bryan K7UDR
|
Hi Michael,
Send it to:
NE Digital Radio
RMA<order number>
245 Highlands Drive
Friday Harbor WA 98250
Thanks,
Bryan K7UDR
|
By
Bryan Hoyer
·
#2553
·
|
|
Draws hat two weeks old defective
I received the Draws on or about June 28. It performed flawlessly until a couple days ago.
After using it till about midnight, I discovered that it was essentially dead the next
|
I received the Draws on or about June 28. It performed flawlessly until a couple days ago.
After using it till about midnight, I discovered that it was essentially dead the next
|
By
Michael Narges
·
#2552
·
|
|
Rpi slow with draws hat
Ever since I installed my Draws hat the RPI 3b+ slowed down and it takes ages to boot and to shutdown. During booting the CPU % reaches 100% before recovering.
Yesterday I was using fldigi and during
|
Ever since I installed my Draws hat the RPI 3b+ slowed down and it takes ages to boot and to shutdown. During booting the CPU % reaches 100% before recovering.
Yesterday I was using fldigi and during
|
By
Christopher Warren
·
#2551
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
I'm still holding tight for the metal case I ordered.
|
I'm still holding tight for the metal case I ordered.
|
By
Dave Phelps <dave.phelps@...>
·
#2550
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
Absolutely.
--
John D. Hays
Kingston, WA
K7VE
|
Absolutely.
--
John D. Hays
Kingston, WA
K7VE
|
By
John D Hays - K7VE
·
#2549
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry.
Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and
|
The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry.
Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and
|
By
vk2psf@...
·
#2548
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat.
We don't have numbers, but reports are
|
There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat.
We don't have numbers, but reports are
|
By
John D Hays - K7VE
·
#2547
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
Thanks, VK2PSF ....
73,
WB7DFV
|
Thanks, VK2PSF ....
73,
WB7DFV
|
By
WB7DFV
·
#2546
·
|
|
Re: New 3D print case design for DRAWS
#draws
#case
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right.
https://www.thingiverse.com/thing:3333435
|
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right.
https://www.thingiverse.com/thing:3333435
|
By
vk2psf@...
·
#2545
·
|
