Ever since I installed my Draws hat the RPI 3b+ slowed down and it takes ages to boot and to shutdown. During booting the CPU % reaches 100% before recovering. Yesterday I was using fldigi and during

I'm still holding tight for the metal case I ordered.

Absolutely. -- John D. Hays Kingston, WA K7VE

The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry. Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and

There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat. We don't have numbers, but reports are

Thanks, VK2PSF .... 73, WB7DFV

Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right. https://www.thingiverse.com/thing:3333435

Search for a Taoglas TG.08. It's passive, so you may need to make sure you have good LOS to the sky, but at least the antenna doesn't have a long whip on it. Steve KC1AWV -- Steve Miller KC1AWV

Taking my DRAWS on the road for the first time this weekend, and I was thinking it'd be nice to have a compact GPS antenna to save myself from having to cart the antenna and long feed line I use at

+1 for that Alex. If you have a case with power pole out the back and GPS out the side I want one!

Hi Jim As far as I know, Winmor is Windows only (for now) I have done some quick tests with the PAT Winlink client over Ardop. Should work. My tests was with a FT817. This video could give you some

Alex, Nice design. Did you have one for the original DRAWS with the GPS port in the side and the power out of the end? I would be very interested in checking that out if you had it. Ed Bloom,

Nice work Alex, will you be doing one for the Pi4?

I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back. https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a

As previously mentioned, updates will be provided when we have solid information on when the manufacturer will be able to deliver. We have gone through some revisions, and the layout of the new Pi 4

Is there any date for shipping of the cases? My previous email to the group has went unanswered for two weeks. -- Dave Slotter, W3DJS

Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D? Thank you! Jim WA9PYH

Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use? 73, Jason KM4ACK Find me on YouTube

From UDRC subgroup: John D Hays - K7VE Jun 24 #3603 Hi All, The new Raspberry Pi 4 has some interesting features and we certainly will be looking at it, however, we at NW Digital Radio do not

Dreuge, that topic and most other discussions about DRAWS are in the "udrc" subgroup of nw-digital-radio. Perhaps you weren't searching the subgroup. -- 73, Steve W9TN