|
Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?
Hi am New to the group.. I am very interested in this aspect of it as I am hearing there is a larger interest in packet if this were accomplished... How can I help... 73 Jerry N9LYA
Hi am New to the group.. I am very interested in this aspect of it as I am hearing there is a larger interest in packet if this were accomplished... How can I help... 73 Jerry N9LYA
|
By
Jerome Kutche <n9lya@...>
·
#1800
·
|
|
Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?
Thanks for the info. I reposted in the subgroup.
Thanks for the info. I reposted in the subgroup.
|
By
Austin - KF7SIW
·
#1799
·
Edited
|
|
Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?
We have not done the engineering or testing for such a solution, but it should be possible either at FM or NFM.
The latest direwolf modem has a duplex mode, which should be able to handle repeating.
We have not done the engineering or testing for such a solution, but it should be possible either at FM or NFM.
The latest direwolf modem has a duplex mode, which should be able to handle repeating.
|
By
John D Hays - K7VE
·
#1798
·
|
|
Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?
We are starting to get a lot more interest in packet, but we can't put two systems up to run a voice repeater and packet node at the same time. If we can get 2 modes by narrow banding it would allow
We are starting to get a lot more interest in packet, but we can't put two systems up to run a voice repeater and packet node at the same time. If we can get 2 modes by narrow banding it would allow
|
By
Austin - KF7SIW
·
#1797
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
I agree with Kenny, but one "trick" is to ensure that the PS/2
extension cable you pick has all 6 pins wired through. Not all the
pins are used on a PS/2 mouse or keyboard, so some extension
I agree with Kenny, but one "trick" is to ensure that the PS/2
extension cable you pick has all 6 pins wired through. Not all the
pins are used on a PS/2 mouse or keyboard, so some extension
|
By
Steve Stroh
·
#1796
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
thats awesome Keith thanks for the help...
I pretty much live in the stick and trying to add tech to central NE..HA
Brian
thats awesome Keith thanks for the help...
I pretty much live in the stick and trying to add tech to central NE..HA
Brian
|
By
Brian T Schmidt
·
#1795
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
Hi Brian,
I run an APRS digipeater (KF7DRV-3) 24/7 using the UDRC and DR-135.
Here is the diagram of the cable I built for it. Just as Kenny suggested, I too started with a keyboard extension cable
Hi Brian,
I run an APRS digipeater (KF7DRV-3) 24/7 using the UDRC and DR-135.
Here is the diagram of the cable I built for it. Just as Kenny suggested, I too started with a keyboard extension cable
|
By
Keith Williamson
·
#1794
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
Thanks for the help. I think to get the system up and running I will get a premade cable and then make a cable myself for educational purposes.
Brian
Thanks for the help. I think to get the system up and running I will get a premade cable and then make a cable myself for educational purposes.
Brian
|
By
Brian T Schmidt
·
#1793
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
To elaborate on Kenny's "Find a keyboard extension cable ..." suggestion, this proved difficult for me until I went here:
https://pchcables.ecomm-search.com/cables/ps2-cables
Steve
Kenny Richards
To elaborate on Kenny's "Find a keyboard extension cable ..." suggestion, this proved difficult for me until I went here:
https://pchcables.ecomm-search.com/cables/ps2-cables
Steve
Kenny Richards
|
By
Steve
·
#1792
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
I have updated https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-II-Cabling-For-2-radios to make the connections clearer.
Audio in to the UDRC is on pin 4 -- on the radio end you can
I have updated https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-II-Cabling-For-2-radios to make the connections clearer.
Audio in to the UDRC is on pin 4 -- on the radio end you can
|
By
John D Hays - K7VE
·
#1791
·
|
|
Re: UDRC-II to Alinco DR-135TMKIII
Brian,
This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like
Brian,
This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like
|
By
Kenny Richards
·
#1790
·
|
|
UDRC-II to Alinco DR-135TMKIII
Good afternoon,
I am looking to build a reliable APRS iGate here in central Nebraska. I system I am planning on building consists of a RPI/UDRC-II and an Alinco DR-135TMKIII. I sent Randy W7TUT and
Good afternoon,
I am looking to build a reliable APRS iGate here in central Nebraska. I system I am planning on building consists of a RPI/UDRC-II and an Alinco DR-135TMKIII. I sent Randy W7TUT and
|
By
Brian T Schmidt
·
#1789
·
|
|
Re: Buster and MacOS upgrade
I’ll take a look when I get a chance, probably this weekend sometime. Remember it’ll take me a few days to get things pushed through the App Store approval process when I’ve got a good
I’ll take a look when I get a chance, probably this weekend sometime. Remember it’ll take me a few days to get things pushed through the App Store approval process when I’ve got a good
|
By
Annaliese McDermond
·
#1788
·
|
|
Re: Buster and MacOS upgrade
Kenny,
Thanks, I just reported this issue on Github as well.
73 Rob
Kenny,
Thanks, I just reported this issue on Github as well.
73 Rob
|
By
rob_eke
·
#1787
·
|
|
Re: Buster and MacOS upgrade
Rob,
There is a thread that started yesterday on the GitHub forum for Buster on this topic. I will see if I can reproduce it tonight when I get home.
73,
Kenny
Rob,
There is a thread that started yesterday on the GitHub forum for Buster on this topic. I will see if I can reproduce it tonight when I get home.
73,
Kenny
|
By
Kenny Richards
·
#1786
·
|
|
aplay no sound card found
Hi,
n7nix/config.sh script fails while aplay reports no udrc sound card found.
Here is my configuration using RaspBerry Pi with UDRC II :
Compass Linux 4.9.80-v7+ #1 SMP Sun May 13
direwolf 1.5 (May
Hi,
n7nix/config.sh script fails while aplay reports no udrc sound card found.
Here is my configuration using RaspBerry Pi with UDRC II :
Compass Linux 4.9.80-v7+ #1 SMP Sun May 13
direwolf 1.5 (May
|
By
Bernard f6bvp / ai7bg
·
#1785
·
|
|
Re: Buster and MacOS upgrade
Issue tracker https://github.com/mcdermj/buster/issues
--
John D. Hays
Edmonds, WA
K7VE
Issue tracker https://github.com/mcdermj/buster/issues
--
John D. Hays
Edmonds, WA
K7VE
|
By
John D Hays - K7VE
·
#1784
·
|
|
Re: Buster and MacOS upgrade
Ok, maybee an idea to contact NH6Z. Due the all the info hear we can take te conclusion thats there is not something wrong with my setup.
Thanks Lyn an Gary for respons.
73 Rob pa3eke
Ok, maybee an idea to contact NH6Z. Due the all the info hear we can take te conclusion thats there is not something wrong with my setup.
Thanks Lyn an Gary for respons.
73 Rob pa3eke
|
By
rob_eke
·
#1783
·
|
|
Re: Buster and MacOS upgrade
Buster belongs to NH6Z.
By
John D Hays - K7VE
·
#1782
·
|
|
Re: Buster and MacOS upgrade
Same here, first using the macOS 13.5 beta some time ago, and still not fixed with 13.5 as released on this iMac. I reported this to Apple and NW digital but no response so far.
Lyn - KC8I
Same here, first using the macOS 13.5 beta some time ago, and still not fixed with 13.5 as released on this iMac. I reported this to Apple and NW digital but no response so far.
Lyn - KC8I
|
By
Lyn
·
#1781
·
|