|
Re: XC-3006 First Look
No lights. Make sure the center pin is in contact.
|
No lights. Make sure the center pin is in contact.
|
By
John D Hays - K7VE
·
#1775
·
|
|
Re: XC-3006 First Look
Are there any lights on the unit? I have 9V adapter now feeding mine (center positive), but ambed is not detecting any devices.
Mike
Kb8zgl
From: <main@nw-digital-radio.groups.io> on
|
Are there any lights on the unit? I have 9V adapter now feeding mine (center positive), but ambed is not detecting any devices.
Mike
Kb8zgl
From: <main@nw-digital-radio.groups.io> on
|
By
Mike - KB8ZGL <wolthuis@...>
·
#1774
·
|
|
Re: XC-3006 First Look
I did the same with an old 12v 1.2a power wallwart I had and drilled out the two holes for the case. The screws were just for the lid to the case so the board flops around inside the case some.
|
I did the same with an old 12v 1.2a power wallwart I had and drilled out the two holes for the case. The screws were just for the lid to the case so the board flops around inside the case some.
|
By
Lloyd Duck
·
#1773
·
|
|
Re: XC-3006 First Look
For power I whacked the end off an old 5v 2a power brick for a USB hub and wired it directly into the 12v side of a molex connector inside the machine running XLX and ambed.
After that I dug deeper in
|
For power I whacked the end off an old 5v 2a power brick for a USB hub and wired it directly into the 12v side of a molex connector inside the machine running XLX and ambed.
After that I dug deeper in
|
By
N0KEG
·
#1772
·
|
|
Re: XC-3006 First Look
I did the same. As a matter of face I took the wall wart that came with a Baofeng UV5R and it works perfectly.
Transcoder works great on the Alabama Link XLX334-B
73,
Doug
W4DBG
--
Doug
|
I did the same. As a matter of face I took the wall wart that came with a Baofeng UV5R and it works perfectly.
Transcoder works great on the Alabama Link XLX334-B
73,
Doug
W4DBG
--
Doug
|
By
Doug - W4DBG
·
#1771
·
|
|
Re: XC-3006 First Look
For power: I found an old 12 volt wall wart (1 ampere I think) and chopped off the plug, replacing it with the tiny plug that came with the 3006.
I double–checked that the center pin was positive
|
For power: I found an old 12 volt wall wart (1 ampere I think) and chopped off the plug, replacing it with the tiny plug that came with the 3006.
I double–checked that the center pin was positive
|
By
Ken Jamrogowicz
·
#1770
·
|
|
Re: XC-3006 First Look
Mike,
A description of what is included is at http://nwdigitalradio.com/xc-3006-full-build/ -- if you believe you are missing any items listed, please contact sales@... (sales handles
|
Mike,
A description of what is included is at http://nwdigitalradio.com/xc-3006-full-build/ -- if you believe you are missing any items listed, please contact sales@... (sales handles
|
By
John D Hays - K7VE
·
#1769
·
|
|
Re: XC-3006 First Look
Ken,
What did you do for power?
Mike
Kb8zgl
From: <main@nw-digital-radio.groups.io> on behalf of "Ken Jamrogowicz via Groups.Io" <ke2n@...>
Reply-To: <main@nw-digital-radio.groups.io>
Date:
|
Ken,
What did you do for power?
Mike
Kb8zgl
From: <main@nw-digital-radio.groups.io> on behalf of "Ken Jamrogowicz via Groups.Io" <ke2n@...>
Reply-To: <main@nw-digital-radio.groups.io>
Date:
|
By
Mike - KB8ZGL <wolthuis@...>
·
#1768
·
|
|
Re: XC-3006 First Look
John,
Was the XC-3006 supposed to come with power pin? Case cut? Or the screws?
I found screws, modified the case, but don’t so far have the right power plug size. Is it a standard you can
|
John,
Was the XC-3006 supposed to come with power pin? Case cut? Or the screws?
I found screws, modified the case, but don’t so far have the right power plug size. Is it a standard you can
|
By
Mike - KB8ZGL <wolthuis@...>
·
#1767
·
|
|
Re: XC-3006 First Look
Thanks John
That's what I was looking for!
Rick n9umj
|
Thanks John
That's what I was looking for!
Rick n9umj
|
By
N9UMJ
·
#1766
·
|
|
Re: XC-3006 First Look
The simple startup on a Linux box is to pull the source from https://github.com/LX3JL/xlxd and compile it.
You will use the instructions at https://github.com/LX3JL/xlxd/tree/master/ambed to build the
|
The simple startup on a Linux box is to pull the source from https://github.com/LX3JL/xlxd and compile it.
You will use the instructions at https://github.com/LX3JL/xlxd/tree/master/ambed to build the
|
By
John D Hays - K7VE
·
#1765
·
|
|
Re: XC-3006 First Look
John
Thank You for that claification..It would have been nice to have seen that before I stuck my foot in my mouth.
I'm still very interested in pursuing the project, but having trouble finding
|
John
Thank You for that claification..It would have been nice to have seen that before I stuck my foot in my mouth.
I'm still very interested in pursuing the project, but having trouble finding
|
By
N9UMJ
·
#1764
·
|
|
Re: XC-3006 First Look
Let me be very clear.
NW Digital Radio built and distributed the hardware (boards) for the XLX group, on the understanding that all software support for ambed and the XLX reflector system would come
|
Let me be very clear.
NW Digital Radio built and distributed the hardware (boards) for the XLX group, on the understanding that all software support for ambed and the XLX reflector system would come
|
By
John D Hays - K7VE
·
#1763
·
|
|
Re: XC-3006 First Look
David
I also receive my XC3006. I would also like to create a multi platform gateway.
But I'm a newbie at reflectors and gateways and having trouble finding a step by step how to or even a start here
|
David
I also receive my XC3006. I would also like to create a multi platform gateway.
But I'm a newbie at reflectors and gateways and having trouble finding a step by step how to or even a start here
|
By
N9UMJ
·
#1762
·
|
|
Re: XC-3006 First Look
FWIW - I have compiled the XLX software and have my new XC-3006 running with ambed. With two ThumbDV's and the XC plugged in, it says I have 8 channels available. If you leave the console window open
|
FWIW - I have compiled the XLX software and have my new XC-3006 running with ambed. With two ThumbDV's and the XC plugged in, it says I have 8 channels available. If you leave the console window open
|
By
Ken Jamrogowicz
·
#1761
·
|
|
XC-3006 First Look
Just received a XC-3006 USB Dongle. I plan on using it for a
Multi Protocol Gateway Reflector Server.
More Photos in my gallery.
|
Just received a XC-3006 USB Dongle. I plan on using it for a
Multi Protocol Gateway Reflector Server.
More Photos in my gallery.
|
By
David [kg5eiu]
·
#1760
·
|
|
Re: Using the UDRC-II with Dire Wolf for Winlink packet radio communications
This presentation from the Raspberry Pi workshop at the 2017 SEAPAC ham convention might help as well
|
This presentation from the Raspberry Pi workshop at the 2017 SEAPAC ham convention might help as well
|
By
Steve
·
#1759
·
|
|
Using the UDRC-II with Dire Wolf for Winlink packet radio communications
At this year's MicroHAMS Digital Conference, I attended John Langner's talk on Dire Wolf. I was led to believe that the Dire Wolf modem would enable Winlink packet on the Raspberry Pi + UDRC
|
At this year's MicroHAMS Digital Conference, I attended John Langner's talk on Dire Wolf. I was led to believe that the Dire Wolf modem would enable Winlink packet on the Raspberry Pi + UDRC
|
By
Chris - KC9AD
·
#1758
·
|
|
Re: Looking for information to build Analog/Digital Hotspot
I suggest you look into the STM32 type boards for the repeater.
One is the http://www.repeater-builder.com/products/stm32-dvm.html board for the repeater interface
I highly suggest the DV-MEGA with a
|
I suggest you look into the STM32 type boards for the repeater.
One is the http://www.repeater-builder.com/products/stm32-dvm.html board for the repeater interface
I highly suggest the DV-MEGA with a
|
By
Lloyd Mitchell
·
#1757
·
|
|
Looking for information to build Analog/Digital Hotspot
I've heard some chatter about an analog hotspot, I believe it was an mmdvm-urdc, I would like to find out more and to see if there are any boards already available the could shield to a pi?
I saw
|
I've heard some chatter about an analog hotspot, I believe it was an mmdvm-urdc, I would like to find out more and to see if there are any boards already available the could shield to a pi?
I saw
|
By
N9UMJ
·
#1756
·
|
