I'm curious about NWDR's take on the Raspberry Pi 3 Model A+ that was recently announced. I'm curious if the form factor (lower profile) of the 3 A+ is compatible with DRAWS? Would the 512K of RAM

The 40 pin GPIO is supposed to be pin compatible, so the DRAWS Hat should be able to plug into it. We have no plans internally to use the 3A+ and they aren't available for testing so we won't be able

https://www.youtube.com/watch?v=dL8gxaSK-zk

I personally don’t use the built on Ethernet. I’ve found in multiple setups (different network switches and Ethernet cables both shielded and not) where it caused more RFi. My APRS iGate I’ve

If you’d like to see what some of the NWDR developers are working on with their boards, I have written a quick page on my current DRAWS project, a combination 2m APRS digipeater and 70cm digital

Given the sold-out popularity of both the UDRC and the DRAWS, and given the functionality and cost differences between the two, is there any possibility that NWDR would consider producing both

I second this thought. I don't need GPS accuracy or a real time clock. I am very happy with the functionality of the UDRC 1. Bob AF9W

Hi Rich, Did you eventually manage to get it working? I was thinking of trying again with my UDRC. 73, Dan - AI2M

Hi Annaliese, Let me introduce myself first. I have been maintaining ham radio application under Linux for two decades, linfbb and FPAC. I am also contributing occasionally to Linux net modules AX25

Hi, I am waiting for my DRAWS to be delivered as I plan to address this issue. 73 Geoffrey F4FXL / KC3FRA

Hi Bernard, Understand that compass is raspbian is Debian. Please ssh into your target machine & cut & paste text rather than attaching screen shots, then you can show us more information from the

Indeed the mapping fails a few times before it succeeds. This is because of driver dependency ordering. Many times the tlv320aic32x4 driver doesn’t look quickly enough for the other pieces of the

Dan -- Because I’m trying to get my repeater up and running again, and would like to use MMDVM-UDRC to do so, I’ve been doing some work on getting MMDVM-UDRC to work. My code is in the

Hi Annaliese There are a set of filter coefficients for 48 kHz sample rate in a branch of the MMDVM firmware. I’ll look into slotting those in and altering the other variables. Ideally I’d

If you have some matlab code, I have a Matlab 2015b license on my Mac that I could spit out the coefficients for you. I’m mildly familiar with the process because I’ve done it for filter

Hi Anna, Thanks for the info. I’m definitely interested in following your progress. Dan - AI2M

Check Samba as well if it's loaded and running. It's a known contributor to "talk to all interfaces" problems. -- Curt, WE7U. http://we7u.wetnet.net U.S. Weather Alerts: Firenet.aprs2.net,

Making 2 products causes inventory issues and makes both more expensive. After we launched the ThumbDV we still get a couple of requests per year for the PiDV but the economics don’t work out. We

I would like to thank all who sent a reply to my kernel panic message. Basil Gunn contributed a lot in analyzing the screen dump : " The kernel panic from your screen shot is from kernel

OK, so then it begs the question, two actually... I had a custom cable made to interface between the UDRC-2 and my KX3. Will that cable work with my new to me DRAWS? Can the DRAWS replace a signalink