Date   

Re: FT-857d Will not transmit on digital modes?? #draws #support

 

Did you use DRAWS™ Manager to set up the ports? Is it keying? Are you getting audio out?

What are the symptoms and configuration settings?


On Mon, Apr 22, 2019, 20:00 <jstnsclark@...> wrote:
AX.25 is working with YAAC. I am able to send and recieve packets. 

But when i try digital modes, WSJTX and FlDigi, i can only recieve. I did stop AX.25 and still nothing. Any ideas on things i can check or try?


Re: GPS without external antenna? #draws #gps

 

No, an antenna is required, via the SMA connector.


On Mon, Apr 22, 2019, 20:21 <rgfuller@...> wrote:
Is there an on-board GPS antenna, or is an external antenna necessary?


GPS without external antenna? #draws #gps

rgfuller@...
 

Is there an on-board GPS antenna, or is an external antenna necessary?


Re: FT-847 PTT with wsjt-x not working #draws

 

If the program doesn't provide GPIO keying, then you have to use CAT or maybe VOX keying.  (Fldigi and direwolf are examples of programs with GPIO PTT keying)


On Mon, Apr 22, 2019, 20:07 <jstnsclark@...> wrote:
I only have the 6pmDIN connected from the DRAWS to the data port on the radio. Do i need a cat control cable also?? 


Re: FT-847 PTT with wsjt-x not working #draws

Justin Clark (KJ7JC)
 

I only have the 6pmDIN connected from the DRAWS to the data port on the radio. Do i need a cat control cable also?? 


FT-857d Will not transmit on digital modes?? #draws #support

Justin Clark (KJ7JC)
 

AX.25 is working with YAAC. I am able to send and recieve packets. 

But when i try digital modes, WSJTX and FlDigi, i can only recieve. I did stop AX.25 and still nothing. Any ideas on things i can check or try?


Re: FT-847 PTT with wsjt-x not working #draws

 

Are you selecting CAT for PTT, then activating hamlib to perform CAT? 

Except in fldigi where you can select GPIO for PTT. 

Don't let Linux throw you, the applications perform the functions regardless of operating system.

On Mon, Apr 22, 2019, 19:23 <jstnsclark@...> wrote:
I'm having the same issue, all-though,i am running an FT-857d. I am fairly new to linux and all, byt i have a good understanding. Have you figured anything out yet??
Justin 


Re: FT-847 PTT with wsjt-x not working #draws

Justin Clark (KJ7JC)
 

I'm having the same issue, all-though,i am running an FT-857d. I am fairly new to linux and all, byt i have a good understanding. Have you figured anything out yet??
Justin 


FT-847 PTT with wsjt-x not working #draws

okiejim
 

I have my draws working with direwolf using left port and aprs. I next wanted to try FT-8 with the same radio the FT-847. I did get some receive data decoded but have yet to be able to get the PTT to work. I have a CAT cable hooked up and can get and change freqs fine but no PTT. Anyone had any success using this radio? Im not sure how I can force the PTT to use the mini cable as that is all I have to use for APRS so looking for some insight.
73's Jim


Re: DV Thumb Drive

Dave Slotter, W3DJS
 

Bryan,

Thanks for letting me know that the cases are available for order. I just placed my early-adopter order for one!

-Dave

On Thu, Apr 18, 2019 at 9:55 AM Bryan Hoyer <bhhoyer@...> wrote:
Hi Jack,

Early Adopter Aluminum Cases are open for order until the end of April. They are $15.

Estimated ship date is late May at this time.

Bryan K7UDR

On Apr 18, 2019, at 6:51 AM, Jack L. Blake Sr (AI4LL) <jblake8061@...> wrote:

Brynt,
I did not see that on the website. Only thing I saw was Item on Backordered. 

On Tue, Apr 16, 2019, 1:50 PM ve7fmn <ve7fmn@...> wrote:
Hi Bryan. Have been waiting for a, draws case announcement for a long time now. 
Is it true that not only is the early adopter price a pigment of my imagination, but it won't fit the early boards either? 
My (not your) additional problem is that I am out of the country until the end of April, and email is spotty here at best, so shoukd you relent and decide that it is worth your trouble to support the earliest boards, I will likely miss out by virtue of my geography? 
With kind regards, 
Fred VE7FMN 



Sent from my Samsung device


-------- Original message --------
From: Bryan Hoyer <bhhoyer@...> 
Date: 2019-04-16 04:40 (GMT-10:00) 
To: main@nw-digital-radio.groups.io 
Subject: Re: [nw-digital-radio] DV Thumb Drive 

Hi Jack,

As Published on the Shop Page, estimated ship date is end of April.

Thanks,
Bryan K7UDR







Re: DV Thumb Drive

 

Hi Jack,

Early Adopter Aluminum Cases are open for order until the end of April. They are $15.

Estimated ship date is late May at this time.

Bryan K7UDR

On Apr 18, 2019, at 6:51 AM, Jack L. Blake Sr (AI4LL) <jblake8061@...> wrote:

Brynt,
I did not see that on the website. Only thing I saw was Item on Backordered. 

On Tue, Apr 16, 2019, 1:50 PM ve7fmn <ve7fmn@...> wrote:
Hi Bryan. Have been waiting for a, draws case announcement for a long time now. 
Is it true that not only is the early adopter price a pigment of my imagination, but it won't fit the early boards either? 
My (not your) additional problem is that I am out of the country until the end of April, and email is spotty here at best, so shoukd you relent and decide that it is worth your trouble to support the earliest boards, I will likely miss out by virtue of my geography? 
With kind regards, 
Fred VE7FMN 



Sent from my Samsung device


-------- Original message --------
From: Bryan Hoyer <bhhoyer@...> 
Date: 2019-04-16 04:40 (GMT-10:00) 
To: main@nw-digital-radio.groups.io 
Subject: Re: [nw-digital-radio] DV Thumb Drive 

Hi Jack,

As Published on the Shop Page, estimated ship date is end of April.

Thanks,
Bryan K7UDR







Re: DV Thumb Drive

Jack L. Blake Sr (AI4LL)
 

Brynt,
I did not see that on the website. Only thing I saw was Item on Backordered. 

On Tue, Apr 16, 2019, 1:50 PM ve7fmn <ve7fmn@...> wrote:
Hi Bryan. Have been waiting for a, draws case announcement for a long time now. 
Is it true that not only is the early adopter price a pigment of my imagination, but it won't fit the early boards either? 
My (not your) additional problem is that I am out of the country until the end of April, and email is spotty here at best, so shoukd you relent and decide that it is worth your trouble to support the earliest boards, I will likely miss out by virtue of my geography? 
With kind regards, 
Fred VE7FMN 



Sent from my Samsung device


-------- Original message --------
From: Bryan Hoyer <bhhoyer@...>
Date: 2019-04-16 04:40 (GMT-10:00)
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DV Thumb Drive

Hi Jack,

As Published on the Shop Page, estimated ship date is end of April.

Thanks,
Bryan K7UDR




Re: DRAWS GPS & FT8 Video inside

Steve McGrane <temporarilyoffline@...>
 

Thanks John!

On Tue, Apr 16, 2019 at 7:39 PM <john.chabalko@...> wrote:
Great video! i learned a thing or 2 about wsjt-x. i'm going to check out your other ones later tonight.

73


Re: DRAWS GPS & FT8 Video inside

john.chabalko@...
 

Great video! i learned a thing or 2 about wsjt-x. i'm going to check out your other ones later tonight.

73


Re: DV Thumb Drive

ve7fmn@...
 

Hi Bryan. Have been waiting for a, draws case announcement for a long time now. 
Is it true that not only is the early adopter price a pigment of my imagination, but it won't fit the early boards either? 
My (not your) additional problem is that I am out of the country until the end of April, and email is spotty here at best, so shoukd you relent and decide that it is worth your trouble to support the earliest boards, I will likely miss out by virtue of my geography? 
With kind regards, 
Fred VE7FMN 
  www.ve7fmn.ca 



Sent from my Samsung device


-------- Original message --------
From: Bryan Hoyer <bhhoyer@...>
Date: 2019-04-16 04:40 (GMT-10:00)
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DV Thumb Drive

Hi Jack,

As Published on the Shop Page, estimated ship date is end of April.

Thanks,
Bryan K7UDR




Re: DV Thumb Drive

 

Hi Jack,

As Published on the Shop Page, estimated ship date is end of April.

Thanks,
Bryan K7UDR


DV Thumb Drive

Jack L. Blake Sr (AI4LL)
 

Order one back on March 24, 2019. It is now April 15, 2019. Has anyone else ordered one of these and not received it yet? Just wondering what is taking so long. I have already paid for this item.


DRAWS GPS & FT8 Video inside

Steve McGrane <temporarilyoffline@...>
 

Latest Video, Fresh off the presses:


Prev. Videos:

WiFi Config, Updates, SSH and VNC


Intro and SD Card Setup


Hope you enjoy them!
- Steve, KM9G


Re: Testing AX.25 #draws

David Lowry
 

Thank you. I am good to go. netstat works, mheard works, and that gets me through the verification process. I owe you an adult beverage.

The tail command output is much more copious than what I copied and pasted previously. In fact, draws/direwolf is capturing many more packets than my hard TNC. I used a scope to set the volume knob to just shy of 1Vpp while listening to the national weather service, and used ft-817 ALSA settings. I was eventually going to look for a way to grab the output of the ADC to see when it fills it’s dynamic range. If I remember correctly, we used to do that on our spectrometers.


Re: #draws #draws

okiejim
 

Here is an update. The coordinator has not gotten back to me on email after several attempts by me to help resolve his email to me. I went into direwolf and commented out the following lines.
IGLOGIN my call here with pass code
IGTXLIMIT  10
 
As far as I can tell this has stopped the situation but not sure. I have my wifi up along with xastir and since I see no response from the coordinator I assume I have meet his request. I hope so.
If anyone sees this as a wrong setup please let me know. I am still learning this card, but I do have a project planed in the near future. It will use the direwolf,sound card and radio remote control.
I am a happy user. This is exactly why I wanted to buy this hat. I love to experiment and learn.