Date   

Re: Draws hat two weeks old defective

 

Hi Michael,

I don’t see your return, do you have a tracking number?

Thanks,
Bryan

On Jul 19, 2019, at 4:32 PM, Bryan Hoyer <bhhoyer@...> wrote:

Hi Michael,

Send it to:

NE Digital Radio
RMA<order number>
245 Highlands Drive
Friday Harbor WA 98250

Thanks,
Bryan K7UDR

On Jul 19, 2019, at 3:55 PM, Michael Narges <mnarges23@...> wrote:

I received the Draws on or about June 28.  It performed flawlessly until a couple days ago. 
After using it till about midnight, I discovered that it was essentially dead the next morning.
Draws-Manager said it could not be found. There was zero audio to my Ft818.  The gps no longer
functioned in gpsmon or cgps, including a myriad of other issues.  Pi continued to perform fine.  
I hooked up the Signalink and was able to work as before. I vbelieve that the board has quit.  
I sent a message via the NW Digital site and no response. Please exchange this board for a working replacement.
Please advise.

Sincerely,

Mike Narges WF8O



Re: 3D drawings?

Craig Gilbreath <w5zym73@...>
 

Dale,
Could you post the native SolidWorks file?  I'm a SW 2019 user and would love to have your model for layouts and modeling for future projects.
I notice you are in SE Michigan. Do you know Dean Kerste? He's the SolidWorks User Group Leader there in that part of the state. Great guy. Look up his user group and make some meetings, you won't be disappointed!  Coincidentally, I'm the Fort Worth SolidWorks User Group Leader.

Craig
W5ZYM

On Wed, Jul 31, 2019 at 9:25 AM Dale Atkin <dacelt43@...> wrote:
Dave,
What format would want the 3D models in? I use SolidWorks and could output it as IGES, STEP, or native SWX. Of course, I would need permission of Northwest Digital to create the models. It wouldn't take me that long to backward engineer my HAT.

Thanks,

Dale KE8GTV


Re: Compact gps antenna and c4labs case mod

Don--AE4DW <dwinflorida@...>
 

I have a couple of those compact gps antennas, and while I cringed at the price initially, the performance is worth every penny.

I've yet to find any chinese or similar knock-offs, so Symmetry appears to be the one and only source for them.


Re: 3D drawings?

Dave C
 

Very nice.  Thanks.


Re: Compact GPS antenna? #draws #gps

K4SPB
 


Compact gps antenna and c4labs case mod

K4SPB
 

Experimenting with a compact right angle SMA antenna with LNA. So far so good. Procured from symmetry electronics, $32 shipped. Mfg is embedded antenna design, model is FGPS35216-SM-RA. 

https://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=47319

Also soldered powerpoles to the 12v cable, coated it in liquid electrical tape and mounted it to a corner of the case with an M2.5x16 screw I got from ACE hardware for $0.75.
May modify the acrylic to keep the wires enclosed. See pics and output of cpgs

E


Re: 3D drawings?

Dale Atkin <dacelt43@...>
 

I'll check it out in the morning. No CAD software at home. I'm sure it is excellent. 

What's the weather like in Sidney? It's humid and hot here in the Great Lakes. 

Cheers mate!

-Dale KE8GTV


Re: 3D drawings?

Dale Atkin <dacelt43@...>
 

No problem. I've been given permission to create files. I should have something in the next couple of days (maybe as soon as tomorrow afternoon). I have some ideas for cases and have a Shapeways account to turn things into production items for the group. Please understand that I'm not doing this for profit. This will be in the spirit of Open Source. 

For me, I'm going to make a steam-punk DRAWS system. :) Brass, flashy lights, coils, etc., etc. Or maybe, I'll stuff it all into an old TRS-80... the possibilities are endless. For me, this isn't something that you put out of sight. It's genius that should be celebrated. Choose function, choose art, choose whatever. We need an Ecomm version. We need a classroom version, etc., etc. Maybe a wearable? Who knows? 

Cheers,

Dale KE8GTV  


Re: 3D drawings?

vk2psf@...
 

Hopefully the attached step is a good start.


Re: 3D drawings?

Dave C
 

Dale,

I'm using Fusion 360 so STEP or IGES would work.  SolidWorks *.prt, *.asm, *.sldprt, *.sldasm - up to SolidWorks 2018 - would also work.  Detail would be nice, but bounding box dimensions and mounting point positions are all I really need.  Thanks for offering.

Dave


Re: 3D drawings?

 

Hello Han,


Are you on Windows, MacOS, or Linux?  

Has the ThumbDV been operational and then recently quit?

Does the LED flash when you test it?

On Wed, Jul 31, 2019 at 9:21 AM kwangsoo han <kshan315@...> wrote:
Hi, Dear;

I'm Han in Seoul, Korea.

I bought the Thumdv as DV3000 about one year ago.

Unfortunately, I failed the test with your recommanded test software.

I'd like to test mine is ok or not.

What can I do for that.

Pls inform to me in detail.

Rds, kshan
 
--------------- Original message -------------
From : "Bryan Hoyer"<bhhoyer@...>
To : <main@nw-digital-radio.groups.io>
CC :
Date : Thu, 1 Aug 2019 1:10:54 +0900 (KST), Wed, 31 Jul 2019 09:10:48 -0700
Subject : Re: [nw-digital-radio] 3D drawings?

Dale,

We’d be happy to give permission.

Contact me at sales@nwdigitalradio and we’ll work out the details.

Thanks,
Bryan K7UDR








--


John D. Hays
Director

  


Re: 3D drawings?

kwangsoo han
 

Hi, Dear;

I'm Han in Seoul, Korea.

I bought the Thumdv as DV3000 about one year ago.

Unfortunately, I failed the test with your recommanded test software.

I'd like to test mine is ok or not.

What can I do for that.

Pls inform to me in detail.

Rds, kshan
 

--------------- Original message -------------
From : "Bryan Hoyer"<bhhoyer@...>
To : <main@nw-digital-radio.groups.io>
CC :
Date : Thu, 1 Aug 2019 1:10:54 +0900 (KST), Wed, 31 Jul 2019 09:10:48 -0700
Subject : Re: [nw-digital-radio] 3D drawings?

Dale,

We’d be happy to give permission.

Contact me at sales@nwdigitalradio and we’ll work out the details.

Thanks,
Bryan K7UDR







Re: 3D drawings?

Dale Atkin <dacelt43@...>
 

Would something like this have sufficient level of detail for a 3D model? This is a screenshot of a Pi3B:
image.png

Thanks,

Dale KE8GTV

On Wed, Jul 31, 2019 at 11:35 AM K2RI - Nick <nicholas.mohr@...> wrote:
I use the Free Hobbyist licence of Fusion 360

I too would welcome the models- I think any of the formats listed would work.

Thank you very much for your efforts.

73,

Nick  K2RI

On Wed, Jul 31, 2019 at 10:25 AM Dale Atkin <dacelt43@...> wrote:
Dave,
What format would want the 3D models in? I use SolidWorks and could output it as IGES, STEP, or native SWX. Of course, I would need permission of Northwest Digital to create the models. It wouldn't take me that long to backward engineer my HAT.

Thanks,

Dale KE8GTV



--


Re: 3D drawings?

 

Dale,

We’d be happy to give permission.

Contact me at sales@nwdigitalradio and we’ll work out the details.

Thanks,
Bryan K7UDR


Re: 3D drawings?

K2RI - Nick
 

I use the Free Hobbyist licence of Fusion 360

I too would welcome the models- I think any of the formats listed would work.

Thank you very much for your efforts.

73,

Nick  K2RI

On Wed, Jul 31, 2019 at 10:25 AM Dale Atkin <dacelt43@...> wrote:
Dave,
What format would want the 3D models in? I use SolidWorks and could output it as IGES, STEP, or native SWX. Of course, I would need permission of Northwest Digital to create the models. It wouldn't take me that long to backward engineer my HAT.

Thanks,

Dale KE8GTV



--


Re: 3D drawings?

dacelt43@...
 

Dave,
What format would want the 3D models in? I use SolidWorks and could output it as IGES, STEP, or native SWX. Of course, I would need permission of Northwest Digital to create the models. It wouldn't take me that long to backward engineer my HAT.

Thanks,

Dale KE8GTV


Re: 3D drawings?

 

Hi Dave,

No, we don’t have 3D Drawings of the board.

Thanks,
Bryan K7UDR

On Jul 27, 2019, at 5:53 PM, Dave C <kd2jip@...> wrote:

I'm considering using the DRAWS HAT in a device I'm designing.  I want to include it in my 3D design, but I can't find dimensions.  Do 3D drawings exist?


Re: Draws hat two weeks old defective

 

Mike,

Please use the form at http://nwdigitalradio.com/support/ for order/support communications.

On Tue, Jul 30, 2019 at 9:56 AM Michael Narges <mnarges23@...> wrote:
As you suggested, I sent my dead Hat to you a couple weeks ago.  Please advise regarding turn around time.  Also, please also replace the power pigtail because the red lead broke off. Please let me know what I owe.

Thanks,

Mike. WF8O 



John D. Hays
Director

  


Re: Draws hat two weeks old defective

Michael Narges
 

As you suggested, I sent my dead Hat to you a couple weeks ago.  Please advise regarding turn around time.  Also, please also replace the power pigtail because the red lead broke off. Please let me know what I owe.

Thanks,

Mike. WF8O 


3D drawings?

Dave C
 

I'm considering using the DRAWS HAT in a device I'm designing.  I want to include it in my 3D design, but I can't find dimensions.  Do 3D drawings exist?