Powering the DRAWS
I am new to this product, so excludes my “newbie” question. But is the DRAWS powered from the interface with the RPi or should I power with the included power leads? Tnx Lynn
|
|
Re: Show US Your DRAW Photos
Alexander <alexgish3rd@...>
Great idea. Please inform the group when available.
73's A. Gish WB1GNL
|
|
Re: Show US Your DRAW Photos
I’m going to order some and will check them out.
toggle quoted messageShow quoted text
Thanks, Bryan K7UDR
|
|
Re: Show US Your DRAW Photos
I gave the wrong url for the Sunfounder displays that I've used.
toggle quoted messageShow quoted text
These are the correct urls for the 7" & 10" LCD displays. https://www.sunfounder.com/7-inch-hdmi-lcd.html https://www.sunfounder.com/10-1-inch-hdmi-lcd.html One more feature that I like is they run on 12V. /Basil Basil Gunn <basil@pacabunga.com> writes:
I just realized they made the same mistake on the DRAWS as they did on the UDRC series.Not really a mistake if you use the superior SunFounder 7" monitor
|
|
Re: Show US Your DRAW Photos
I just realized they made the same mistake on the DRAWS as they did on the UDRC series.Not really a mistake if you use the superior SunFounder 7" monitor (1024x600) which would have the HAT cables come out the top. https://www.amazon.com/SunFounder-Inch-Monitor-HDMI-Raspberry/dp/B073GYBS93/ref=sr_1_4 I personally prefer the Sunfounder 10" display with 1280x800 resolution that allows enough screen real estate to run a mail client or Xastir. With the 10" screen the cables face the bottom but the RPi is mounted at the top of the display with plenty of room for the cables. The 7" & 10" Sunfounders come with a built in speaker, RPi mounting pieces & an HDMI cable to mate with the RPi. I believe (could be wrong) both sizes come with a touch screen option. The 800x400 Smart-Pi display was good for my console winlink apps, mutt with paclink-unix, but really didn't cut it for anything with a gui. /Basil The mini-din connectors are on the same side as they were on the UDRC. This means if you try to use one on the "Smarti-Pi" cases with the touchscreen and hinged base the cables will be in the way just like they are with the UDRC.Or just buy a better video screen. /Basil n7nix
|
|
Re: Show US Your DRAW Photos
Or maybe NWDR could have a bunch made and offer them as an accessory? Rather than each of us doing individual orders. Just a thought.
73.
_-_-_ Dave, AE7TD
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io>
On Behalf Of Herb Weiner
Sent: Wednesday, November 28, 2018 12:10 PM To: main@nw-digital-radio.groups.io Subject: Re: [nw-digital-radio] Show US Your DRAW Photos
Or, you could 3D Print these Pi Stand Extenders (or order them 3D Printed for you) from Thingiverse. These are perfect for the Smarti-Pi case with my UDRC, and they should work with DRAWS as well.
Herb
|
|
Re: Show US Your DRAW Photos
Thanks Herb, that is something I was hoping to find. The location of connectors is limited by the GPIO location and the HAT standard form factor.
On Wed, Nov 28, 2018, 12:11 Herb Weiner <herbw@... wrote:
|
|
Re: Show US Your DRAW Photos
Or, you could 3D Print these Pi Stand Extenders (or order them 3D Printed for you) from Thingiverse. These are perfect for the Smarti-Pi case with my UDRC, and they should work with DRAWS as well.
toggle quoted messageShow quoted text
Herb
|
|
Re: Show US Your DRAW Photos
Robert Sears
I just realized they made the same mistake on the DRAWS as they did on the UDRC series.
The mini-din connectors are on the same side as they were on the UDRC. This means if you try to use one on the "Smarti-Pi" cases with the touchscreen and hinged base the cables will be in the way just like they are with the UDRC. Oh well looks like I will have to remove the connectors like I did on the UDRC2 Robert/KF7VOP
|
|
Re: DRAWS Workstation (Turnkey version)
Yes - just configuration file changes, e.g. in /boot/config.txt
On Wed, Nov 28, 2018 at 9:10 AM <ve7fmn@...> wrote: Perhaps a silly question, but will the new image support the earlier udrc-2 hat?
|
|
Re: DRAWS Workstation (Turnkey version)
ve7fmn@...
Perhaps a silly question, but will the new image support the earlier udrc-2 hat?
|
|
Re: Show US Your DRAW Photos
Yes - set for public viewing.
|
|
Re: Show US Your DRAW Photos
I just posted the link on our website without issue.
toggle quoted messageShow quoted text
David, I should have contacted you first. Mea Culpa, Bryan K7UDR
On Nov 28, 2018, at 8:13 AM, Steve <yahoo-udr@aberle.net> wrote:
|
|
Re: Show US Your DRAW Photos
Steve
Can you set up publicly viewable flag on that gallery?
toggle quoted messageShow quoted text
Thanks, Steve (still waiting in the order backlog) David [kg5eiu] via Groups.Io wrote on 11/28/18 7:46 AM:
Photos and Images/Gallery of DRAWS board, projects and more
|
|
Show US Your DRAW Photos
Photos and Images/Gallery of DRAWS board, projects and more
Link To My DRAW Gallery Here 73!! David (KG5EIU) #Photo
|
|
There should have been an insert directing you to the support page *Batteries not included.
|
|
ki7huo@...
Received my DRAWS hat today.
Didn’t get much info - are there instructions anywhere? It did not come with a battery although it looks like it takes one? Tim
|
|
Re: DRAWS Workstation (Turnkey version)
AE7G
Give me a call on my cell 206 920 7072
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Randy Hall <listk7age@...>
Date: 11/21/18 1:15 PM (GMT-08:00)
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)
HI
I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package.
Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|
Re: DRAWS Workstation (Turnkey version)
Jerome Kutche <n9lya@...>
Winmor only runs under WINOWS.. I run all my stuff under LinBPQ or in the case of a Pi PiLinbpq There is a version of ARDOP that will run on a Pi. ARDOPC I believe John G9BPQ has a ARDOPC 1 and an ARDOPC 2 Or you can run PiLinBPQ and control Winmor on a remote PC. This is how I run WINMOR ARDOP AND VARA. On a Remote Windows PC.. and its controlled by the Linux Server I have that runs LinBPQ…
73 jerry N9LYA
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of Randy Hall
HI
I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package.
Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|
Re: DRAWS Workstation (Turnkey version)
Randy Hall
HI I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package. Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|