|
Re: DRAWS Workstation (Turnkey version)
AE7G
Give me a call on my cell 206 920 7072
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Randy Hall <listk7age@...>
Date: 11/21/18 1:15 PM (GMT-08:00)
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)
HI
I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package.
Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
Jerome Kutche <n9lya@...>
Winmor only runs under WINOWS.. I run all my stuff under LinBPQ or in the case of a Pi PiLinbpq There is a version of ARDOP that will run on a Pi. ARDOPC I believe John G9BPQ has a ARDOPC 1 and an ARDOPC 2 Or you can run PiLinBPQ and control Winmor on a remote PC. This is how I run WINMOR ARDOP AND VARA. On a Remote Windows PC.. and its controlled by the Linux Server I have that runs LinBPQ…
73 jerry N9LYA
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of Randy Hall
HI
I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package.
Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
Randy Hall
HI I am wondering if Winlink along with the WinMore modem works on the Pi? A Pi with the DRAWs hat would make a neat HF field package. Randy, K7AGE
On Tue, Nov 20, 2018 at 7:31 PM <ve7fmn@...> wrote:
|
|
|
|
Re: DRAWS next batch?
Hi John,
toggle quoted messageShow quoted text
I did. But I’ve been swamped with the DRAWS project. Email me next week and we’ll get you finished up. Thanks, Bryan K7UDR
|
|
|
|
Re: DRAWS next batch?
John MacDonald <john@...>
Bryan.... did you get my email last week? I do not have any forwarding in my netgear router. Do I need to add forwarding of some kind for my 70cm D-STAR and for the 2m DSTAR that you still have? Our club is really wanting to get the 2m DSTAR module going, but, if we can get a newer module, we're willing to wait a bit. John, K4BR ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Wednesday, November 21, 2018 10:33 AM, Bryan Hoyer <bhhoyer@...> wrote:
|
|
|
|
Re: Out of stock!
toggle quoted messageShow quoted text
|
|
|
|
Re: DRAWS next batch?
|
|
|
|
DRAWS next batch?
I guess I am late to the party, when is the next run for the DRAWS? 73 David
|
|
|
|
Out of stock!
Dave Phelps
Any eta for replenishment on the draw?
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
ve7fmn@...
Tnx bro
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
It will be announced on our website and in these forums.
On Tue, Nov 20, 2018, 17:34 <ve7fmn@... wrote:
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
It will be announced on our website and in these forums.
On Tue, Nov 20, 2018, 17:34 <ve7fmn@... wrote:
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
ve7fmn@...
OK, I have two pis waiting for a task, so please advise when the cases are online. Cheers, Fred
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:
You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card. When the cases become available you will be able to purchase one for your board.
The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately. --
John D. Hays K7VE
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:
You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card. When the cases become available you will be able to purchase one for your board. The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately. John D. Hays Edmonds, WA K7VE   
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
ve7fmn@...
Hi John. I ordered a Draws but maybe I should have waited? Fred VE7FMN Is there an upgrade route?
From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Ed,
On Tue, Nov 20, 2018 at 11:13 AM Ed via Groups.Io <elancki=yahoo.com@groups.io> wrote:
--
John D. Hays K7VE
|
|
|
|
Re: DRAWS Workstation (Turnkey version)
Ed, It is probably better for you to wait for the image to be ready. It can be used with the board or workstation, but the workstation will be integrated and probably easier for those unfamiliar with Linux. The workstation is slated (subject to change) to be just under $300 and should be available Q1 - 2019. If response is similar to what we are seeing for the board, it will be in high demand upon release.
On Tue, Nov 20, 2018 at 11:13 AM Ed via Groups.Io <elancki=yahoo.com@groups.io> wrote: I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi. Can you provide some info on when the complete workstation will be available, and what it will cost? --
John D. Hays Edmonds, WA K7VE
|
|
|
|
DRAWS Workstation (Turnkey version)
Ed
I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi. Can you provide some info on when the complete workstation will be available, and what it will cost?
Thanks & 73, Ed N2BHD
|
|
|
|
Re: Radio connector on MMDVM board
This is not the right group.
On Mon, Nov 5, 2018, 18:05 JIM Rogers via Groups.Io <n5vgq=yahoo.com@groups.io wrote: Dose anyone have a link to the proper plug I need to mate with the socket on my MMDVM board for the radios. I have looked in my extra stuff and con not find to match the pin spacing.
|
|
|
|
Re: DRAWS Update
Included.
On Mon, Nov 5, 2018, 18:23 <KD2BBW@... wrote: does this ship with battery or is that a CVS run lol?
|
|
|
|
Re: DRAWS Update
Daniel Corwin
does this ship with battery or is that a CVS run lol?
|
|
|
|
Radio connector on MMDVM board
JIM Rogers
Dose anyone have a link to the proper plug I need to mate with the socket on my MMDVM board for the radios. I have looked in my extra stuff and con not find to match the pin spacing.
|
|
|
