Date   

Re: DRAWS next batch?

 


DRAWS next batch?

 

I guess I am late to the party, when is the next run for the DRAWS?

 73

   David


Out of stock!

Dave Phelps <dave.phelps@...>
 

Any eta for replenishment on the draw?


Re: DRAWS Workstation (Turnkey version)

ve7fmn@...
 

Tnx bro

 

From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Tuesday, November 20, 2018 5:59 PM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)

 

It will be announced on our website and in these forums. 

 

On Tue, Nov 20, 2018, 17:34 <ve7fmn@... wrote:

OK, I have two pis waiting for a task, so please advise when the cases are online.

Cheers, Fred

 

From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Tuesday, November 20, 2018 3:08 PM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)

 

 

 

On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:

Hi John.

I ordered a Draws but maybe I should have waited?

Fred VE7FMN

Is there an upgrade route?

 

 

You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card.  When the cases become available you will be able to purchase one for your board.   

 

The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately.

--

 


John D. Hays
Edmonds, WA

K7VE

 

Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender.

 


Re: DRAWS Workstation (Turnkey version)

 

It will be announced on our website and in these forums. 


On Tue, Nov 20, 2018, 17:34 <ve7fmn@... wrote:

OK, I have two pis waiting for a task, so please advise when the cases are online.

Cheers, Fred

 

From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Tuesday, November 20, 2018 3:08 PM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)

 

 

 

On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:

Hi John.

I ordered a Draws but maybe I should have waited?

Fred VE7FMN

Is there an upgrade route?

 

 

You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card.  When the cases become available you will be able to purchase one for your board.   

 

The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately.

--

 


John D. Hays
Edmonds, WA

K7VE

 

   

 


Re: DRAWS Workstation (Turnkey version)

ve7fmn@...
 

OK, I have two pis waiting for a task, so please advise when the cases are online.

Cheers, Fred

 

From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Tuesday, November 20, 2018 3:08 PM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)

 

 

 

On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:

Hi John.

I ordered a Draws but maybe I should have waited?

Fred VE7FMN

Is there an upgrade route?

 

 

You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card.  When the cases become available you will be able to purchase one for your board.   

 

The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately.

--

 


John D. Hays
Edmonds, WA

K7VE

 

Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender.

 


Re: DRAWS Workstation (Turnkey version)

 



On Tue, Nov 20, 2018 at 3:03 PM <ve7fmn@...> wrote:

Hi John.

I ordered a Draws but maybe I should have waited?

Fred VE7FMN

Is there an upgrade route?



You will be able to obtain the image (an alpha, then beta) shortly - it is a matter of a download and placing it on an SD card.  When the cases become available you will be able to purchase one for your board.   

The workstation is an integration of the board, case, etc. along with the Pi, but each component can be obtained separately.
--


John D. Hays
Edmonds, WA
K7VE

   


Re: DRAWS Workstation (Turnkey version)

ve7fmn@...
 

Hi John.

I ordered a Draws but maybe I should have waited?

Fred VE7FMN

Is there an upgrade route?

 

 

From: main@nw-digital-radio.groups.io <main@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Tuesday, November 20, 2018 11:26 AM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] DRAWS Workstation (Turnkey version)

 

Ed,


It is probably better for you to wait for the image to be ready.   It can be used with the board or workstation, but the workstation will be integrated and probably easier for those unfamiliar with Linux.

The workstation is slated (subject to change) to be just under $300 and should be available Q1 - 2019.

If response is similar to what we are seeing for the board, it will be in high demand upon release.


 

On Tue, Nov 20, 2018 at 11:13 AM Ed via Groups.Io <elancki=yahoo.com@groups.io> wrote:

I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi.  Can you provide some info on when the complete workstation will be available, and what it will cost?

Thanks & 73,
Ed
N2BHD


 

--

 


John D. Hays
Edmonds, WA

K7VE

 

Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender.

 


Re: DRAWS Workstation (Turnkey version)

 

Ed,

It is probably better for you to wait for the image to be ready.   It can be used with the board or workstation, but the workstation will be integrated and probably easier for those unfamiliar with Linux.

The workstation is slated (subject to change) to be just under $300 and should be available Q1 - 2019.

If response is similar to what we are seeing for the board, it will be in high demand upon release.




On Tue, Nov 20, 2018 at 11:13 AM Ed via Groups.Io <elancki=yahoo.com@groups.io> wrote:
I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi.  Can you provide some info on when the complete workstation will be available, and what it will cost?

Thanks & 73,
Ed
N2BHD



--


John D. Hays
Edmonds, WA
K7VE

   


DRAWS Workstation (Turnkey version)

Ed
 

I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi.  Can you provide some info on when the complete workstation will be available, and what it will cost?

Thanks & 73,
Ed
N2BHD


Re: Radio connector on MMDVM board

 

This is not the right group.


On Mon, Nov 5, 2018, 18:05 JIM Rogers via Groups.Io <n5vgq=yahoo.com@groups.io wrote:
Dose anyone have a link to the proper plug I need to mate with the socket on my MMDVM board for the radios. I have looked in my extra stuff and con not find to match the pin spacing.


Re: DRAWS Update

 

Included.


On Mon, Nov 5, 2018, 18:23 <KD2BBW@... wrote:
does this ship with battery or is that a CVS run lol?


Re: DRAWS Update

Daniel Corwin
 

does this ship with battery or is that a CVS run lol?


Radio connector on MMDVM board

JIM Rogers
 

Dose anyone have a link to the proper plug I need to mate with the socket on my MMDVM board for the radios. I have looked in my extra stuff and con not find to match the pin spacing.


Re: DRAWS Update

 

You can't have overkill :)

Raspberry Pi 2, 3, or 3+ should all be fine.  The more CPU power can go to applications. 

On Mon, Nov 5, 2018, 17:03 <vk5zuc@... wrote:
John,
Do you recommend a specific RPi 3 model with DRAWS?
I have just ordered a 3B+ or is that overkill?
Andrew de VK5CV


Re: DRAWS Update

vk5zuc@...
 

John,
Do you recommend a specific RPi 3 model with DRAWS?
I have just ordered a 3B+ or is that overkill?
Andrew de VK5CV


DRAWS Update

 


k7udr posted: "First units arrived Saturday, and we have been testing thru the weekend. DRAWS is fully functional and we have a few minor assembly issues to resolve before shipping.  "

New post on NW Digital Radio

DRAWS Update

by k7udr

First units arrived Saturday, and we have been testing thru the weekend. DRAWS is fully functional and we have a few minor assembly issues to resolve before shipping.

NWDR Digital Radio Amateur WorkStation

 

k7udr | November 5, 2018 at 1:24 pm | Categories: DRAWS | URL: https://wp.me/p2mAAP-1p2


Trouble clicking? Copy and paste this URL into your browser:
http://nwdigitalradio.com/draws-update/


--


John D. Hays
Edmonds, WA
K7VE

   


Re: [udrc] Linux RMS - headed for digital dustbin?

Basil Gunn
 

It appears that LinuxRMS may stop working in the near future when Winlink
CMS stops supporting legacy mode.
It appears that is not the case.

RMS Gateway upgrade notes for new Winlink Web Services
https://groups.yahoo.com/neo/groups/LinuxRMS/conversations/messages/2775

/Basil n7nix


Re: BlueDV software.

Raymond Burns
 

You also have to register with Dstar. There are YouTube videos to guide you
De Ray Wb2mly

On Sun, Oct 21, 2018, 9:12 PM Raymond Burns <rburns2548@...> wrote:
You need windv not bluedv available on PA7LIM website.
When you configure it check the block for the 3000u dongle.
De Ray Wb2mly

On Sun, Oct 21, 2018, 1:22 PM w4bpt via Groups.Io <w4bpt=yahoo.com@groups.io> wrote:
What do i need to set up my dv3000u on  BlueDV .
I have the software on my pc but cannot get it to connect to it on d star.


Re: BlueDV software.

Raymond Burns
 

You need windv not bluedv available on PA7LIM website.
When you configure it check the block for the 3000u dongle.
De Ray Wb2mly

On Sun, Oct 21, 2018, 1:22 PM w4bpt via Groups.Io <w4bpt=yahoo.com@groups.io> wrote:
What do i need to set up my dv3000u on  BlueDV .
I have the software on my pc but cannot get it to connect to it on d star.