|
Dave Phelps <dave.phelps@...>
I'm still holding tight for the metal case I ordered.
|
|
|
|
Absolutely.
On Mon, Jul 15, 2019 at 4:04 PM <vk2psf@...> wrote: ... I am trying to design something to let a fan operate, unfortunately the design of the board, with connectors on all sides, makes this difficult. --
John D. Hays Kingston, WA K7VE
|
|
|
|
vk2psf@...
The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry.
Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and I think there is some settling of the kernel and other bits, the same issue arose when the 3B+ was first introduced. Temperature, under “normal” use I haven’t hit any problems with thermals yet, however I am trying to design something to let a fan operate, unfortunately the design of the board, with connectors on all sides, makes this difficult.
|
|
|
|
There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat. We don't have numbers, but reports are that the 4 runs warmer than the 3. John D. Hays Kingston, WA K7VE
|
|
|
|
WB7DFV
Thanks, VK2PSF .... 73, WB7DFV
On 7/12/2019 1:48 PM, vk2psf@...
wrote:
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right.
|
|
|
|
vk2psf@...
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right.
https://www.thingiverse.com/thing:3333435
|
|
|
|
Steve KC1AWV
Search for a Taoglas TG.08. It's passive, so you may need to make sure you have good LOS to the sky, but at least the antenna doesn't have a long whip on it. Steve KC1AWV
On Fri, Jul 12, 2019 at 1:53 PM Chris Metcalf <chris@...> wrote: Taking my DRAWS on the road for the first time this weekend, and I was thinking it'd be nice to have a compact GPS antenna to save myself from having to cart the antenna and long feed line I use at home with me, at least when I'm operating out doors. -- Steve Miller KC1AWV
|
|
|
|
Chris Metcalf
Taking my DRAWS on the road for the first time this weekend, and I was thinking it'd be nice to have a compact GPS antenna to save myself from having to cart the antenna and long feed line I use at home with me, at least when I'm operating out doors.
Anybody got a recommendation on an antenna they've had good experiences with? Thanks,
Chris K1NOT
|
|
|
|
Ryan W Leathers
+1 for that Alex. If you have a case with power pole out the back and GPS out the side I want one!
On Fri, Jul 12, 2019, 11:19 AM Ed Bloom, KD9FRQ via Groups.Io <ewbloom=verizon.net@groups.io> wrote:
|
|
|
|
Re: WinMor or ARDOP operation with Pi HAT and Pi3+
#draws
Hi Jim As far as I know, Winmor is Windows only (for now) LA9KOA, Karl
|
|
|
|
Ed Bloom, KD9FRQ
Alex,
Nice design.
Did you have one for the original DRAWS with the GPS port in the side and the power out of the end?
I would be very interested in checking that out if you had it.
Ed Bloom, KD9FRQ
ewbloom@... Sent from Webmail access
-----Original Message-----
From: vk2psf <vk2psf@...> To: main <main@nw-digital-radio.groups.io> Sent: Fri, Jul 12, 2019 8:38 am Subject: [nw-digital-radio] New 3D print case design for DRAWS #case #draws I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back.
https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a replacement lid design. .../alex
|
|
|
|
JT Croteau <jt.tobit@...>
Nice work Alex, will you be doing one for the Pi4?
On Fri, Jul 12, 2019, 08:38 <vk2psf@...> wrote: I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back.
|
|
|
|
vk2psf@...
I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back.
https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a replacement lid design. .../alex
|
|
|
|
As previously mentioned, updates will be provided when we have solid information on when the manufacturer will be able to deliver. We have gone through some revisions, and the layout of the new Pi 4 requires yet another revision, but it is being worked. Any personal requests should go to the support form at the bottom of http://nwdigitalradio.com/support/ where it can be handled by sales/customer service. Be sure to include the order number. Also UDRC/DRAWS™ topics should go to https://nw-digital-radio.groups.io/g/udrc
On Wed, Jul 10, 2019 at 4:16 PM Dave Slotter <slotter@...> wrote:
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Is there any date for shipping of the cases? My previous email to the group has went unanswered for two weeks. -- Dave Slotter, W3DJS
On Tue, Jun 25, 2019 at 8:42 AM Dave Slotter <slotter@...> wrote:
|
|
|
|
WinMor or ARDOP operation with Pi HAT and Pi3+
#draws
wa9pyh@...
Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D?
Thank you! Jim WA9PYH
|
|
|
|
piardopc?
Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use?
73, Jason KM4ACK Find me on YouTube
|
|
|
|
Re: New Raspberry Pi 4 compatibility with DRAWS HAT
#support
Edward Seeliger
Jun 24 #3603
Hi All,
The new Raspberry Pi 4 has some interesting features and we certainly will be looking at it, however, we at NW Digital Radio do not get any advance engineering information from the Raspberry Pi Foundation, so we must also wait for shipments to have test units.
In the short term, we recommend sticking with the currently supported models of Pis unless you are familiar with building software and self support. We are also looking at updating the design for the production (non-beta) DRAWS™ aluminum cases to accommodate the 2, 3, and 4 Pi motherboards.
Stay tuned. John D. Hays
Director 
|
|
|
|
Re: New Raspberry Pi 4 compatibility with DRAWS HAT
#support
W9TN
Dreuge, that topic and most other discussions about DRAWS are in the "udrc" subgroup of nw-digital-radio. Perhaps you weren't searching the subgroup.
toggle quoted messageShow quoted text
-- 73, Steve W9TN
On 6/25/19 12:04 PM, Dreuge@gmail.com wrote:
I tried searching on " Raspberry Pi 4" and did not find any discussion. As for thread, I'm guessing you mean topics, as I don't see option or mention of threads on the proups.io system. I do thank you foir the reply, I'll try searching on John Hayes. I guessing that there is a way to navigate this system better than I'm aware.
|
|
|
|
Re: New Raspberry Pi 4 compatibility with DRAWS HAT
#support
JT Croteau <jt.tobit@...>
toggle quoted messageShow quoted text
On Tue, Jun 25, 2019, 11:04 <Dreuge@...> wrote: I tried searching on " Raspberry Pi 4" and did not find any discussion. As for thread, I'm guessing you mean topics, as I don't see option or mention of threads on the proups.io system. I do thank you foir the reply, I'll try searching on John Hayes. I guessing that there is a way to navigate this system better than I'm aware.
|
|
|
