Date   

Re: Status of UDRC-II?

john@...
 

Hi, Bryan... I still do not have my UDRCi-ii.  :-(  So, will I get one of these new units especially since I gave you the idea for its development?

John, K4BR






‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On July 27, 2018 10:36 AM, Bryan Hoyer <bhhoyer@...> wrote:

We are having an aluminum case built for the new unit.

On Jul 27, 2018, at 7:35 AM, KD2BBW@... wrote:

Will the new device still be compatible with the acrylic cases you currently offer?



Re: Status of UDRC-II?

 

We are having an aluminum case built for the new unit.

On Jul 27, 2018, at 7:35 AM, KD2BBW@... wrote:

Will the new device still be compatible with the acrylic cases you currently offer?


Re: Status of UDRC-II?

Daniel Corwin
 

Will the new device still be compatible with the acrylic cases you currently offer?


Re: Status of UDRC-II?

 

You have the choice of either a refund or a discount on new units.

On Jul 26, 2018, at 12:37 PM, KD2BBW@... wrote:

What about units that haven’t shipped and are on back order?


Re: Status of UDRC-II?

Daniel Corwin
 

What about units that haven’t shipped and are on back order?


Re: Status of UDRC-II?

 

We are announcing the replacement model DRAWS, Digital Radio Amateur Workstation, next month available in September.

Thanks,
Bryan K7UDR

On Jul 24, 2018, at 4:15 PM, Chris - KC9AD <c.doutre@...> wrote:

Hi Guys,
 
I was wondering if you had any kind of update on the UDRC-II availability? Thanks,
 
Chris KC9AD
 


Re: Status of UDRC-II?

 

On Tue, Jul 24, 2018 at 4:15 PM, Chris - KC9AD <c.doutre@...> wrote:

Hi Guys,

 

I was wondering if you had any kind of update on the UDRC-II availability? Thanks,

 

Chris KC9AD

 




--


John D. Hays
Edmonds, WA
K7VE

   


Status of UDRC-II?

Chris - KC9AD
 

Hi Guys,

 

I was wondering if you had any kind of update on the UDRC-II availability? Thanks,

 

Chris KC9AD

 


Re: Compass and Duckdns

Joe Detiveaux
 



well the end result is this
pi@compass:/duckdns $ sudo ./duck.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file /root/duckdns/duck.log: No such file or
Warning: directory
curl: (23) Failed writing body (0 != 2)
pi@compass:/duckdns $


Ok just saw the issue it should be /root/Duckdns/   I was only /Duckdns oops..




On Mon, Jul 23, 2018 at 2:04 PM, John D Hays - K7VE <john@...> wrote:
DuckDNS is it's own service.  Just use https://www.duckdns.org/install.jsp  if you want to use it.  There are other DynamicDNS services.  You can turn one on at ircddb.net, that automatically updates on ircddb reports.

Go to http://regsrv.ircddb.net/index.htm and use "Change Dynamic DNS" setting.

If your repeater callsign were NW7DR, then nw7dr.gw.ircddb.net would be the domain name.

On Mon, Jul 23, 2018 at 11:38 AM, Joe Detiveaux <Wa5vyk@...> wrote:
 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx




--


John D. Hays
Edmonds, WA
K7VE

   




--
Joe Detiveaux   WA5VYK
Odessa,Tx


Re: Compass and Duckdns

 

DuckDNS is it's own service.  Just use https://www.duckdns.org/install.jsp  if you want to use it.  There are other DynamicDNS services.  You can turn one on at ircddb.net, that automatically updates on ircddb reports.

Go to http://regsrv.ircddb.net/index.htm and use "Change Dynamic DNS" setting.

If your repeater callsign were NW7DR, then nw7dr.gw.ircddb.net would be the domain name.

On Mon, Jul 23, 2018 at 11:38 AM, Joe Detiveaux <Wa5vyk@...> wrote:
 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx




--


John D. Hays
Edmonds, WA
K7VE

   


Re: Compass and Duckdns

 

Hi Joe,

We have it running on our Echolink System. There is nothing special, just follow the duckdns instructions.

Bryan K7UDR


Compass and Duckdns

Joe Detiveaux
 

 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx


UDRC ship date

Daniel Corwin
 

Any idea when back orders will be fulfilled? Thank you!


Re: MMDVM & UDRC

 

Thanks John, that helped but there were still a few errors along the way:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNRX.o NXDNRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNTX.o NXDNTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25RX.o P25RX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25TX.o P25TX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o POCSAGTX.o POCSAGTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SampleRB.o SampleRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialController.o SerialController.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialPort.o SerialPort.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialRB.o SerialRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SoundCardReaderWriter.o SoundCardReaderWriter.cpp
SoundCardReaderWriter.cpp: In member function ‘virtual void CSoundCardWriter::entry()’:
SoundCardReaderWriter.cpp:479:85: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 le ((ret = ::snd_pcm_writei(m_handle, m_samples + offset, nSamples - offset)) != (nSamples - offset)) {
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Thread.o Thread.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Utils.o Utils.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFRX.o YSFRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFTX.o YSFTX.cpp
g++ Biquad.o CalDMR.o CalDStarRX.o CalDStarTX.o CalNXDN.o CalP25.o CWIdTX.o DMRDMORX.o DMRDMOTX.o DMRSlotType.o DStarRX.o DStarTX.o FIR.o FIRInterpolator.o IO.o IOUDRC.o MMDVM.o NXDNRX.o NXDNTX.o P25RX.o P25TX.o POCSAGTX.o SampleRB.o SerialController.o SerialPort.o SerialRB.o SoundCardReaderWriter.o Thread.o Utils.o YSFRX.o YSFTX.o -g -lpthread -lasound -lwiringPi -o MMDVM

it did complete the compile. When I attempt ./MMDVM is receive the following:

Link does not exist: /dev/pts/1 <> ttyMMDVM0
Error creating symlink from /dev/pts/1 to ttyMMDVM0
Unable to open serial port on vpty: ttyMMDVM0

I am assuming this indicates that it is not properly configured for the UDRC.  That is what I will be exploring next.

Thanks for the help
Rich, KR4PI
 
 


Re: MMDVM & UDRC

 

I haven't had a chance to build yet, but it looks like you haven't installed the dev package for asoundlib. Try:

sudo apt install libasound2-dev

On Fri, Jul 6, 2018 at 11:02 AM, Rich KR4PI <rich.schnieders@...> wrote:
Does anyone have MMDVM running on their UDRC yet? I have tried to compile and run with the latest compass Cedar but still cannot complete the build. Sudo make results in:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
In file included from MMDVM.cpp:21:0:
SoundCardReaderWriter.h:51:28: fatal error: alsa/asoundlib.h: No such file or directory
 
                            ^
compilation terminated.
Makefile:17: recipe for target 'MMDVM.o' failed
make: *** [MMDVM.o] Error 1

Thanks in advance for the help.

Rich, KR4PI




--


John D. Hays
Edmonds, WA
K7VE

   


Re: MMDVM & UDRC

 

Does anyone have MMDVM running on their UDRC yet? I have tried to compile and run with the latest compass Cedar but still cannot complete the build. Sudo make results in:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
In file included from MMDVM.cpp:21:0:
SoundCardReaderWriter.h:51:28: fatal error: alsa/asoundlib.h: No such file or directory
 
                            ^
compilation terminated.
Makefile:17: recipe for target 'MMDVM.o' failed
make: *** [MMDVM.o] Error 1

Thanks in advance for the help.

Rich, KR4PI


Re: Buster and MacOS upgrade

andrea ottaviani
 

All ok, good job!


Best 73 de IK0MMI
Andrea




Il giorno 14 giu 2018, alle ore 21:59, Annaliese McDermond <nh6z@...> ha scritto:

I’ll take a look when I get a chance, probably this weekend sometime.  Remember it’ll take me a few days to get things pushed through the App Store approval process when I’ve got a good change.

— Anna (NH6Z)

On Jun 14, 2018, at 12:43 PM, rob_eke via Groups.Io <rob_eke@...> wrote:

Kenny,
Thanks, I just reported this issue on Github as well.

73 Rob



Re: Buster and MacOS upgrade

rob_eke
 

Just installed the Buster bug fix V1.21 and all worked again as a charm.
Tks ANNA!


Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

Jerome Kutche <n9lya@...>
 

Hi am New to the group.. I am very interested in this aspect of it as I am hearing there is a larger interest in packet if this were accomplished... How can I help... 73 Jerry N9LYA


Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

Austin - KF7SIW
 
Edited

Thanks for the info. I reposted in the subgroup.