Date   
Re: Buster on OS X 10.13 (High Sierra)?

Lyn
 

Jim,

It works fine with High Sierra on this old iMac (10.13.1 Beta right now).

Lyn - KC8I

On Oct 24, 2017, at 3:17 AM, Jim 7J1AJH <@jimt> wrote:

Does Buster 1.2 work properly on High Sierra?

It has been a couple of months since I used Buster on my wife's MacBook,
and now I can receive but apparently not transmit audio. The only thing
I _know_ has changed is the operating system version.

Jim 7J1AJH



Buster on OS X 10.13 (High Sierra)?

Jim 7J1AJH
 

Does Buster 1.2 work properly on High Sierra?

It has been a couple of months since I used Buster on my wife's MacBook,
and now I can receive but apparently not transmit audio. The only thing
I _know_ has changed is the operating system version.

Jim 7J1AJH

Re: PIDV AMBEserver installation nightmare

 

PiDV is a serial device attached to the UART on the header. 

On Sep 15, 2017 20:37, "Flavio VE2ZFP" <fpohlmann2@...> wrote:
Apparently it does not need the wiringPI, am I right?
Correct me if I'm mistaken.
Does it work with the PIDV?

Thanks I'll give it a try.

Re: PIDV AMBEserver installation nightmare

Flavio VE2ZFP
 

Apparently it does not need the wiringPI, am I right?
Correct me if I'm mistaken.
Does it work with the PIDV?

Thanks I'll give it a try.

Re: PIDV AMBEserver installation nightmare

Flavio VE2ZFP
 

Thanks David


Re: Buster for Mac Book Pro

Kenny Richards
 

Just noticed that I could install Buster on my 10.11 (El Capitan) system from the App Store. Thanks Jeremy!

Re: PIDV AMBEserver installation nightmare

Steve N4IRS
 

Flavio,
When we were troubleshooting the problem with the ThumbDV and the Raspberry Pi, Mike N4IRR wrote a Python script to better test the DV3000. The script works with the PiDV, ThumbDV and AMBEserver.
If you want to give it a try it is at <https://github.com/N4IRS/Analog_Bridge/blob/master/DV3000/AMBEtest4.py>

Hope this help.
73, Steve N4IRS 

On 09/14/2017 04:44 PM, Flavio VE2ZFP wrote:
Hi everyone!

I have tried to compile AMBEserver following the directions on the NWDR the old method  (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github  link on the NWDR site.  It says it install the server in /usr/sbin when it install in /usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I also tried  Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work at all. It has worked once when I bought it back in 2014 but I had to format my SD card and reinstall everything
from scratch.  Is there an easy way to do it?  I'm giving up. I've spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0
9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes

Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes

Any thoughts?

Thank you
Flavio VE2ZFP

Re: PIDV AMBEserver installation nightmare

david bencini ik5xmk <ik5xmk@...>
 


2017-09-15 6:15 GMT+02:00 John D Hays - K7VE <john@...>:

Flavio,

Sorry you are having difficulties.  The response you are getting does not indicate that you are communicating with the PiDV.


I will try to get some time to write a better test program for the Pi.


On Thu, Sep 14, 2017 at 1:44 PM, Flavio VE2ZFP <fpohlmann2@...> wrote:
Hi everyone!

I have tried to compile AMBEserver following the directions on the NWDR the old method  (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github  link on the NWDR site.  It says it install the server in /usr/sbin when it install in /usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I also tried  Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work at all. It has worked once when I bought it back in 2014 but I had to format my SD card and reinstall everything
from scratch.  Is there an easy way to do it?  I'm giving up. I've spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0
9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes

Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes

Any thoughts?

Thank you
Flavio VE2ZFP




--


John D. Hays
Edmonds, WA
K7VE

   


Re: PIDV AMBEserver installation nightmare

Flavio VE2ZFP
 

Hi John

I didn't know that.
I'll check the addendum.

Thanks

Re: PIDV AMBEserver installation nightmare

Flavio VE2ZFP
 

Hi Ian!

I'll look it up.

Thanks

Re: PIDV AMBEserver installation nightmare

Ian
 

Flavio,

As it happens I am in the process of installing a project using my ThumbDV and part of the instructions to check

communication with the ThumbDV is :-

python AMBEtest3.py -n -s /dev/ttyUSB0
Setting ...
/dev/ttyUSB0
d
8
N
1
False
False
False

Reset
6100010033
Wrote: 5 bytes
a9
Product ID
6100010030
Wrote: 5 bytes
a
0AMBE3000R <-------------------------this
Version
6100010031
Wrote: 5 bytes
a11V120.E100.XXXX.C106.G514.R009.B0010411.C0020208 <-----and this
Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes
a

this and this indicate communication to/from the ThumbDV.

I am using this on a RaspberryPi 2 with :-

Linux 4.1.19-v7+ #1 SMP Fri Mar 11 14:31:11 CET 2016 armv7l GNU/Linux

Hope this helps a little ?

Regards,

Ian..

On 14-09-2017 21:44, Flavio VE2ZFP wrote:
Hi everyone!
I have tried to compile AMBEserver following the directions on the
NWDR the old method (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github link on the NWDR site.
It says it install the server in /usr/sbin when it install in
/usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I
also tried Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work
at all. It has worked once when I bought it back in 2014 but I had to
format my SD card and reinstall everything
from scratch. Is there an easy way to do it? I'm giving up. I've
spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the
start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte
from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or
AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0
9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes
Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes
Any thoughts?
Thank you
Flavio VE2ZFP
Links:
------
[1] https://nw-digital-radio.groups.io/g/main/message/1597
[2] https://groups.io/mt/6016634/162806
[3] https://nw-digital-radio.groups.io/g/main/post
[4] https://nw-digital-radio.groups.io/g/main/editsub/162806
[5] https://nw-digital-radio.groups.io/g/main
[6] https://groups.io/static/tos
[7] https://nw-digital-radio.groups.io/g/main/leave/defanged

Re: PIDV AMBEserver installation nightmare

 

Flavio,

Sorry you are having difficulties.  The response you are getting does not indicate that you are communicating with the PiDV.


I will try to get some time to write a better test program for the Pi.


On Thu, Sep 14, 2017 at 1:44 PM, Flavio VE2ZFP <fpohlmann2@...> wrote:
Hi everyone!

I have tried to compile AMBEserver following the directions on the NWDR the old method  (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github  link on the NWDR site.  It says it install the server in /usr/sbin when it install in /usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I also tried  Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work at all. It has worked once when I bought it back in 2014 but I had to format my SD card and reinstall everything
from scratch.  Is there an easy way to do it?  I'm giving up. I've spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0
9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes

Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes

Any thoughts?

Thank you
Flavio VE2ZFP




--


John D. Hays
Edmonds, WA
K7VE

   

PIDV AMBEserver installation nightmare

Flavio VE2ZFP
 

Hi everyone!

I have tried to compile AMBEserver following the directions on the NWDR the old method  (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github  link on the NWDR site.  It says it install the server in /usr/sbin when it install in /usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I also tried  Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work at all. It has worked once when I bought it back in 2014 but I had to format my SD card and reinstall everything
from scratch.  Is there an easy way to do it?  I'm giving up. I've spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0
9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes

Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes

Any thoughts?

Thank you
Flavio VE2ZFP

Re: Buster for Mac Book Pro

Jeremy McDermond <mcdermj@...>
 

Vince —

No promises, but I’ll certainly look at what’s involved to make that happen.

Jeremy McDermond (NH6Z)

On Sep 6, 2017, at 10:41 AM, Vince Gill via Groups.Io <ve3elb@...> wrote:

Hello Jeremy. Can you please make Buster available in the Canadian App Store as well am sure many hams a around the world would like to use the app. Currently it's only available in the USA App Store. 

Thank You. 

On Sep 6, 2017, at 1:20 PM, Jeremy McDermond <mcdermj@...> wrote:

I have received many offers for help with the Apple developer fees and I would like to thank those that have written me privately.  I’ll be renewing the subscription on Friday morning when I get paid and I’ll work to reinstate Buster at that point in time.

For those that have offered donations, I do have a “Tip Jar” at https://www.nh6z.net/tip-jar.  Please read the disclaimer carefully because the sentiment expressed there is the primary reason why I have historically been hesitant to take donations.  For those that have already donated: thank you.  It is very much appreciated.

I’ll keep folks updated as to status as I have time later this week.  Thanks for your patience.

Jeremy McDermond (NH6Z)

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M 




--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...






Re: Buster for Mac Book Pro

Vince Gill
 

Hello Jeremy. Can you please make Buster available in the Canadian App Store as well am sure many hams a around the world would like to use the app. Currently it's only available in the USA App Store. 

Thank You. 

On Sep 6, 2017, at 1:20 PM, Jeremy McDermond <mcdermj@...> wrote:

I have received many offers for help with the Apple developer fees and I would like to thank those that have written me privately.  I’ll be renewing the subscription on Friday morning when I get paid and I’ll work to reinstate Buster at that point in time.

For those that have offered donations, I do have a “Tip Jar” at https://www.nh6z.net/tip-jar.  Please read the disclaimer carefully because the sentiment expressed there is the primary reason why I have historically been hesitant to take donations.  For those that have already donated: thank you.  It is very much appreciated.

I’ll keep folks updated as to status as I have time later this week.  Thanks for your patience.

Jeremy McDermond (NH6Z)

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M




--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...





Re: Buster for Mac Book Pro

Jeremy McDermond <mcdermj@...>
 

I have received many offers for help with the Apple developer fees and I would like to thank those that have written me privately.  I’ll be renewing the subscription on Friday morning when I get paid and I’ll work to reinstate Buster at that point in time.

For those that have offered donations, I do have a “Tip Jar” at https://www.nh6z.net/tip-jar.  Please read the disclaimer carefully because the sentiment expressed there is the primary reason why I have historically been hesitant to take donations.  For those that have already donated: thank you.  It is very much appreciated.

I’ll keep folks updated as to status as I have time later this week.  Thanks for your patience.

Jeremy McDermond (NH6Z)

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M




--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...





Re: Buster for Mac Book Pro

Jeremy McDermond <mcdermj@...>
 

I have not paid my Apple Developer fees for this year. I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week. Until then, Apple will not allow any new downloads or upgrades of the program. If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M


--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...

Re: Buster for Mac Book Pro

Kenny Richards
 

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M 

Re: Buster for Mac Book Pro

Mark L. Rehme
 

On Sep 5, 2017, at 7:39 PM, bjstull@... wrote:

Just got the NW Digital ThumbdV, but Buster doesn't show up in the Apple App Store.  Anybody know what's up with that?  And how do I use the Thumbdv without it?  I am brand new to this am excited to get started.

73,
Bob Stull
N4RKS

Buster for Mac Book Pro

bjstull@...
 

Just got the NW Digital ThumbdV, but Buster doesn't show up in the Apple App Store.  Anybody know what's up with that?  And how do I use the Thumbdv without it?  I am brand new to this am excited to get started.

73,
Bob Stull
N4RKS