Hi everyone!
I have tried to compile AMBEserver following the directions on the
NWDR the old method (deprecated), the new method suggested by VK4TUX
which has no make file when you use the github link on the NWDR site.
It says it install the server in /usr/sbin when it install in
/usr/bin instead.
I have tried to set up on three different Raspberry Pi's A, B and B+ I
also tried Compass Linux that says it comes per-installed
but you have to install all dependencies wiringPi etc..Does not work
at all. It has worked once when I bought it back in 2014 but I had to
format my SD card and reinstall everything
from scratch. Is there an easy way to do it? I'm giving up. I've
spent so many hours on it I don't know anymore if it's worth it.
When I do sudo AMBEserverGPIO -i /dev/ttyAMA0 with or without the
start I get
Reset DV3000
Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0x01AMBEserver: unknown byte
from the DV3000, 0x00AMBEserver: unknown byte from the DV3000, 0x39.
Or using the old python method :
sudo ./dv3000d
dv3000d has been deprecated, please use AMBEserverGPIO for DV3000 or
AMBEserver for DV3000U
Board is recognized
sudo python AMBEtest2.py
d
8
N
1
False
False
False
0

9
Reset
6100010033
Wrote: 5 bytes
Version
6100010031
Wrote: 5 bytes
Set DSTAR Mode
61000c000a013007634000000000000048
Wrote: 17 bytes
Any thoughts?
Thank you
Flavio VE2ZFP
Links:
------
[1] https://nw-digital-radio.groups.io/g/main/message/1597
[2] https://groups.io/mt/6016634/162806
[3] https://nw-digital-radio.groups.io/g/main/post
[4] https://nw-digital-radio.groups.io/g/main/editsub/162806
[5] https://nw-digital-radio.groups.io/g/main
[6] https://groups.io/static/tos
[7] https://nw-digital-radio.groups.io/g/main/leave/defanged

On Sep 6, 2017, at 10:41 AM, Vince Gill via Groups.Io <ve3elb@...> wrote:

Hello Jeremy. Can you please make Buster available in the Canadian App Store as well am sure many hams a around the world would like to use the app. Currently it's only available in the USA App Store. 

Thank You. 

On Sep 6, 2017, at 1:20 PM, Jeremy McDermond <mcdermj@...> wrote:

I have received many offers for help with the Apple developer fees and I would like to thank those that have written me privately.  I’ll be renewing the subscription on Friday morning when I get paid and I’ll work to reinstate Buster at that point in time.

For those that have offered donations, I do have a “Tip Jar” at https://www.nh6z.net/tip-jar.  Please read the disclaimer carefully because the sentiment expressed there is the primary reason why I have historically been hesitant to take donations.  For those that have already donated: thank you.  It is very much appreciated.

I’ll keep folks updated as to status as I have time later this week.  Thanks for your patience.

—

Jeremy McDermond (NH6Z)

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M 

--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...

I have received many offers for help with the Apple developer fees and I would like to thank those that have written me privately.  I’ll be renewing the subscription on Friday morning when I get paid and I’ll work to reinstate Buster at that point in time.

For those that have offered donations, I do have a “Tip Jar” at https://www.nh6z.net/tip-jar.  Please read the disclaimer carefully because the sentiment expressed there is the primary reason why I have historically been hesitant to take donations.  For those that have already donated: thank you.  It is very much appreciated.

I’ll keep folks updated as to status as I have time later this week.  Thanks for your patience.

—

Jeremy McDermond (NH6Z)

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M

--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...

On Sep 5, 2017, at 8:21 PM, Jeremy McDermond <mcdermj@...> wrote:

I have not paid my Apple Developer fees for this year.  I am waiting until I’m in a bit more advantageous cash flow situation at the end of the week.  Until then, Apple will not allow any new downloads or upgrades of the program.  If you’ve already installed it, it’ll continue to work.

On Sep 5, 2017, at 8:19 PM, Kenny Richards <kenny@...> wrote:

Bob,

What version of MacOS are you running? At this time Buster is only available for 10.12 (Sierra). If you are not running 10.12, it probably won't show up in the App Store. I know Jeremy talked about creating a build for 10.11 at least, but don't know the status of that.

73,
Kenny, KU7M

--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj@...

Just got the NW Digital ThumbdV, but Buster doesn't show up in the Apple App Store.  Anybody know what's up with that?  And how do I use the Thumbdv without it?  I am brand new to this am excited to get started.

73,
Bob Stull
N4RKS

-------- Original Message --------
Subject: Re: [nw-digital-radio] Touch screen display sizing
From: "Budd Churchward" <budd@...>
Date: Sat, July 22, 2017 2:46 pm
To: main@nw-digital-radio.groups.io

If you have a keyboard, hold down the [ALT] key and then drag from anywhere in the window with your mouse of you finger on the screen.

 

Budd WB7FHC

 

From: WV7S

Sent: Saturday, July 22, 2017 11:19 AM

To: main@nw-digital-radio.groups.io

Subject: [nw-digital-radio] Touch screen display sizing

 

Trouble reducing touch screen display enough to configure WSJT-X.  Can't get to the "confirm" button at tne bottom of the page.  Is there a trick to setting up the display?  73, Den WV7S