Date   

Re: Pi - Can't Find AMBE Dongle On The Port Specified

jyricklin@...
 

Hello,
what is your version off DummyRepeater?
Get the version : DummyRepeater-20150507
I use 2 repeater on ircDDBGateway
DV3000U and dvptr V1
you can use : http://www.westerndstar.co.uk/Downloads/D-StarRepeater+ircDDB+VNC+Widget.rar
I update ircDDBGateway-20150615 and DStarRepeater-20150615
All is ok
73 F1IZL


Re: Pi - Can't Find AMBE Dongle On The Port Specified

"John D. Hays" <john@...>
 

Provide the configuration you are using for AMBEserverGPIO  and For DummyRepeater

Include addresses and ports.

On Wed, Jun 17, 2015 at 8:37 PM, dan@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

I'm struggling to get my DV3000 board going in my Pi.  I followed the instructions found in http://www.amateurlogic.com/downloads/DV3000.pdf.  After a couple of failed starts I believe I've followed the instructions to the letter.  


I'm trying to use the model of running Dummy Repeater on my Win 8.1 laptop and have it connect to the Pi.  But, when I try I get "Can't Find the AMBE Dongle on the port specified".  


I shut down the firewall on the laptop, and don't have a firewall on the Pi.   I'm certain I'm using the correct IP address.  


As a test I installed ircddbgateway and dummy repeater on the PI and brought it up there (with an external sound card installed).   I wasn't able to connect with serial, but I was able to bring it up and use it momentarily connecting via the network (to 127.0.0.1).  


Any suggestions on how to troubleshoot?





--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


Pi - Can't Find AMBE Dongle On The Port Specified

dan@...
 

I'm struggling to get my DV3000 board going in my Pi.  I followed the instructions found in http://www.amateurlogic.com/downloads/DV3000.pdf.  After a couple of failed starts I believe I've followed the instructions to the letter.  


I'm trying to use the model of running Dummy Repeater on my Win 8.1 laptop and have it connect to the Pi.  But, when I try I get "Can't Find the AMBE Dongle on the port specified".  


I shut down the firewall on the laptop, and don't have a firewall on the Pi.   I'm certain I'm using the correct IP address.  


As a test I installed ircddbgateway and dummy repeater on the PI and brought it up there (with an external sound card installed).   I wasn't able to connect with serial, but I was able to bring it up and use it momentarily connecting via the network (to 127.0.0.1).  


Any suggestions on how to troubleshoot?



Re: My talk on DV Modes at MicroHAMS 2015

izzy_y2k@...
 

Great presentation John,  Fusion shows much promise and I see it as the dominate player in digital (with the help of you and NW Digital.)

Why would someone want to spend thousands on an Icom stack when we will be able to have a tri-mode system for hundreds with the capability of other systems to follow like integration of the analog voip systems as well.

I long for one device to be able to access Dstar Fusion DMR on digital side and Allstar, Echolink & Irlp on 1 repeater (not to communicate with each other but to be able to access any one at a time.)


My talk on DV Modes at MicroHAMS 2015

"John D. Hays" <john@...>
 


--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


Any updates on UDRC including release date

ian@...
 

I was wondering if there will be any updates posted soon about the UDRC, operational and interfacing, any other hardware/software that may be required ?

Release Date ? 

Just trying to get a better understanding of this product, I am very interested in finding out more about it.


Regards

Ian (VK2HK) 


Re: OpenSystemFusion mentioned on HamRadioNow

m1dns.gb3hb@...
 

Will the new "fusion module" when completed, use ircddbgateway for its routing ?
and if so will we have a dstar - fusion crossover within ircddbgateway, ie can I link my dstar repeater and my dr1x to the same reflector. As I see it, bits is bits over the network, what ever module is at the end point would be responsible for transmission in the correct mode....  Or am I looking at it too simply ?? Is this the intent, or are the c4fm modules intended to be a separate entity using their own separate reflectors or rooms etc.

A.


---In UniversalDigitalRadio@..., <naylorjs@...> wrote :

System Fusion is on my radar as a communications system for me to support.

Jonathan  G4KLX


From: "Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...>

 
Gary Pierce KN4AQ mentions the OpenSystemFusion project (not by name, of course) at about the 41 minute mark of HamRadioNow

Matthew Pitts
N8OHU
OpenSystemFusion developer
 




Re: OpenSystemFusion mentioned on HamRadioNow

Jonathan Naylor <naylorjs@...>
 

System Fusion is on my radar as a communications system for me to support.

Jonathan  G4KLX


From: "Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio]"
To: "yaesusystemfusion@..." ; "universaldigitalradio@..." ; "QuadNet_ircDDB_Open_Network@..." ; "amateur_radio_experimenters_corner@..."
Sent: Monday, 25 May 2015, 0:37
Subject: [UniversalDigitalRadio] OpenSystemFusion mentioned on HamRadioNow

 
Gary Pierce KN4AQ mentions the OpenSystemFusion project (not by name, of course) at about the 41 minute mark of HamRadioNow Episode 201


Matthew Pitts
N8OHU
OpenSystemFusion developer
 




OpenSystemFusion mentioned on HamRadioNow

Matthew Pitts <daywalker_blade_2004@...>
 

Gary Pierce KN4AQ mentions the OpenSystemFusion project (not by name, of course) at about the 41 minute mark of HamRadioNow Episode 201


Matthew Pitts
N8OHU
OpenSystemFusion developer
 


Re: UDRC: Yaesu is "good" with D-STAR

BHaney <kc9gqr@...>
 

some one was talking about a  System Fusion reflector?

On Thu, May 21, 2015 at 5:07 PM, Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 


It's based on the same code as ircDDB, but doesn't have the repeater callsign restrictions that the Icom G2 system and the main ircDDB system have.

Matthew Pitts
N8OHU
 



From: "BHaney kc9gqr@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...>
To: UniversalDigitalRadio@...
Sent: Thursday, May 21, 2015 4:31 PM
Subject: Re: [UniversalDigitalRadio] UDRC: Yaesu is "good" with D-STAR

 
never heard of  QUad net..   details..    details 



On Thu, May 21, 2015 at 2:17 PM, Will Wright w4wwm@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 
Yes,

I will say the Quadnet was always open to other digital bridges It seem no one had an interest. 73

Will / W4WWM
QuadNetet Admin Team


On Thu, 2015-05-21 at 14:05 -0400, Matthew Pitts daywalker_blade_2004@...m [UniversalDigitalRadio] wrote:
 
Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU



On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...> wrote:
 
Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike










Re: UDRC: Yaesu is "good" with D-STAR

Tony Langdon <vk3jed@...>
 

On 22/05/2015 3:22 AM, 'John D. Hays' john@... [UniversalDigitalRadio] wrote:
Reception of the UDRC has been excellent.

I just want to be very clear.  

The UDRC only adds and enables the use of a DR-1X as a D-STAR repeater (and connects to the network using ircddbgateway - NW7DR  A  is my test platform).

It does not transcode between analog or Fusion Digital and D-STAR. 
It looks like the digital world's answer to EchoIRLP - access to multiple networks, but no bridging or transcoding between them.
-- 
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: UDRC: Yaesu is "good" with D-STAR

"Scott Weis" <kb2ear@...>
 

See:

 

http://www.openquad.net/node/4

 

From: UniversalDigitalRadio@... [mailto:UniversalDigitalRadio@...]
Sent: Thursday, May 21, 2015 4:32 PM
To: UniversalDigitalRadio@...
Subject: Re: [UniversalDigitalRadio] UDRC: Yaesu is "good" with D-STAR

 




never heard of  QUad net..   details..    details 

 

On Thu, May 21, 2015 at 2:17 PM, Will Wright w4wwm@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Yes,

I will say the Quadnet was always open to other digital bridges It seem no one had an interest. 73

Will / W4WWM
QuadNetet Admin Team


On Thu, 2015-05-21 at 14:05 -0400, Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio] wrote:

 

Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU


On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...> wrote:

 

Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike

 

 

 





Re: UDRC: Yaesu is "good" with D-STAR

Matthew Pitts <daywalker_blade_2004@...>
 


It's based on the same code as ircDDB, but doesn't have the repeater callsign restrictions that the Icom G2 system and the main ircDDB system have.

Matthew Pitts
N8OHU
 



From: "BHaney kc9gqr@... [UniversalDigitalRadio]"
To: UniversalDigitalRadio@...
Sent: Thursday, May 21, 2015 4:31 PM
Subject: Re: [UniversalDigitalRadio] UDRC: Yaesu is "good" with D-STAR

 
never heard of  QUad net..   details..    details 



On Thu, May 21, 2015 at 2:17 PM, Will Wright w4wwm@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 
Yes,

I will say the Quadnet was always open to other digital bridges It seem no one had an interest. 73

Will / W4WWM
QuadNetet Admin Team


On Thu, 2015-05-21 at 14:05 -0400, Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio] wrote:
 
Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU



On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...> wrote:
 
Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike









Re: UDRC: Yaesu is "good" with D-STAR

BHaney <kc9gqr@...>
 

never heard of  QUad net..   details..    details 

On Thu, May 21, 2015 at 2:17 PM, Will Wright w4wwm@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Yes,

I will say the Quadnet was always open to other digital bridges It seem no one had an interest. 73

Will / W4WWM
QuadNetet Admin Team


On Thu, 2015-05-21 at 14:05 -0400, Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio] wrote:

 
Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU



On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...> wrote:
 
Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike







Re: UDRC: Yaesu is "good" with D-STAR

Will Wright <w4wwm@...>
 

Yes,

I will say the Quadnet was always open to other digital bridges It seem no one had an interest. 73

Will / W4WWM
QuadNetet Admin Team


On Thu, 2015-05-21 at 14:05 -0400, Matthew Pitts daywalker_blade_2004@... [UniversalDigitalRadio] wrote:
 
Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU



On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" wrote:
 
Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike






Re: UDRC: Yaesu is "good" with D-STAR

kc9gqr@...
 

K9WRA  system  would be  willing to do mix modes.     just let us know what hardware we need etc and how we can help..   This would give coverage accross central IL  


k9wra.club

Bradley
kc9gqr


Re: UDRC: Yaesu is "good" with D-STAR

Matthew Pitts <daywalker_blade_2004@...>
 

Mike,

If you combine the UDRC with both ircDDBGateway and SFGateway, an ircDDB based system that I have started working on, and SFReflector, you'll have access to both digital networks from either side. I know there are some groups that are open to mixing modes, and you'll be welcome on those systems that are.

Matthew Pitts
N8OHU


On May 21, 2015 1:03:32 PM EDT, "ve3mic@... [UniversalDigitalRadio]" wrote:
 

Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike


--
Sent from my Moto X with K-9 Mail. Please excuse my brevity.


Re: UDRC: Yaesu is "good" with D-STAR

"John D. Hays" <john@...>
 

Reception of the UDRC has been excellent.

I just want to be very clear.  

The UDRC only adds and enables the use of a DR-1X as a D-STAR repeater (and connects to the network using ircddbgateway - NW7DR  A  is my test platform).

It does not transcode between analog or Fusion Digital and D-STAR.  


On Thu, May 21, 2015 at 10:03 AM, ve3mic@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike

__._,
John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


UDRC: Yaesu is "good" with D-STAR

ve3mic@...
 

Hi everyone,

I was excited to hear the announcement about the UDRC project.

As a recent recipient/owner/trustee of a DR-1X System Fusion repeater, I too was thinking of experimenting with linking up to other digital systems such as D-STAR, Allstar, etc. and immediately, a few thoughts came to mind. 

1- I wonder what Yaesu would think of this?

2- I also wondered about what the various D-STAR networks would think of this?


Well, I got the answer to the first question. I was very (pleasantly) surprised when at last Sunday's System Fusion forum at the 2015 Dayton Hamvention, Bryan Hoyer K7UDR, from NW Digital Systems took the podium and gave the audience a brief overview of their new UDRC project. I wonder if Icom's position will be similar.


Now for the second question. How welcome would other D-STAR sources of digital voice be on the D-STAR network? (US Trust, D Extra, etc.)

Being new to D-STAR, I haven't got a good handle on how well received (or not) D-STAR via System Fusion would be. 


Your comments are welcomed.

73 de Mike


Noobie Question Serial Port & Sound Card

kj5fa@...
 

These must be really simple things to resolve cause I can't see where anyone else has the issues I am having.

I have the DV3000 card that I am trying to run on a Rpi2.

The first thing I had to change to get my RPi to boot-up after making intial changes(speeding up clock and disabling serial port) to add DV3000 to the Rpi2 was this line:
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait


I had to change to be:

dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait


Does that sound right? But I was able to boot-up after making this change.


I did get the results for the AMBEserver test when running the sudo python AMBEtest2.py test.

Installed IRCDDBGateway and setup using examples from the Amateurlogic.tv dv3000.pdf.


When I run the sudo dummyrepeater command, I can not select the USB sound card. The card shows up as a selection in alsamixer, though. And then if I select DVSerial for the Dongle, I have only a slection of none or /dev/ttyAMA0. If I select the AMA0, when I launch dummyrepeater the next time it tells me it can't find the AMBE Dongle on the specified port. How do I know which port this should be looking for?


I am still fairly new at the raspberry pi and linux, so thanks for all the help and patience you can give me.


73s de KJ5FA,

Kevin


 

1581 - 1600 of 2576