Date   

Re: 9600 Packet Qualification

"John D. Hays" <john@...>
 

Rudy has been successfully unsubscribed.



John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  






On Tue, Aug 26, 2014 at 11:36 AM, Bob Nielsen n7xy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 


On Aug 25, 2014, at 10:38 PM, 'Rudy Benner' rudy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

>
> I have repeatedly tried to unsubscribe from this group, by all the usual approved methods.

If you configure your mail program to display all of the normally-hidden headers, you will see:

List-Unsubscribe: UniversalDigitalRadio-unsubscribe@...>

What this means is that you need to send an email to
UniversalDigitalRadio-unsubscribe@...

You should then receive a message requiring you to reply in order to complete the unsubscribe process.

Bob, N7XY



Re: 9600 Packet Qualification

Bob Nielsen <n7xy@...>
 

On Aug 25, 2014, at 10:38 PM, 'Rudy Benner' rudy@... [UniversalDigitalRadio] <UniversalDigitalRadio@yahoogroups.com> wrote:


I have repeatedly tried to unsubscribe from this group, by all the usual approved methods.
If you configure your mail program to display all of the normally-hidden headers, you will see:

List-Unsubscribe: <mailto:UniversalDigitalRadio-unsubscribe@yahoogroups.com>

What this means is that you need to send an email to
UniversalDigitalRadio-unsubscribe@yahoogroups.com

You should then receive a message requiring you to reply in order to complete the unsubscribe process.

Bob, N7XY


Re: ethernet linking

"John D. Hays" <john@...>
 

D-STAR DD mode, support of which is planned, can be used in Ethernet bridge mode.  However, the data rate is such that you probably  want to filter out most Ethernet traffic and instead use IP routing.

Some Ethernet devices are very chatty (e.g. Windows boxes for example)



John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  






On Tue, Aug 26, 2014 at 10:26 AM, ve7ept@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Hi. Perception check.....

Am I correct that these radios can be used for  point to point ethernet link?

Doug, ve7ept



ethernet linking

ve7ept@...
 

Hi. Perception check.....

Am I correct that these radios can be used for  point to point ethernet link?

Doug, ve7ept



Re: 9600 Packet Qualification

Bill Vodall <wa7nwp@...>
 

On Mon, Aug 25, 2014 at 4:48 PM, Steve yahoo-udr@...
[UniversalDigitalRadio] <UniversalDigitalRadio@yahoogroups.com> wrote:
While the concept of a TNC test CD is good, the WA8LMF website mentions
only Windoze XP. Any test suite, CD or otherwise, needs to be generic
enough to run with any browser and any OS, including Linux, Mac, Win 7,
and Win 8.

Also, interoperability with as many TNCs as possible, including the
KPC-9612 non-plus, would be good as one don't always know what TNC is on
the other end of a connection, especially when things get cobbled
together in response to an emergency deployment.
It's just audio you can run into any TNC. I'll try it one of these
days but I don't expect it to be much more than running the list
output of the TNC function through a line counter (wc -l)

These days it's not unreasonable to record all the audio of a channel
for future testing.

Bill

Bill


Re: 9600 Packet Qualification

Steve <yahoo-udr@...>
 

While the concept of a TNC test CD is good, the WA8LMF website mentions only Windoze XP. Any test suite, CD or otherwise, needs to be generic enough to run with any browser and any OS, including Linux, Mac, Win 7, and Win 8.

Also, interoperability with as many TNCs as possible, including the KPC-9612 non-plus, would be good as one don't always know what TNC is on the other end of a connection, especially when things get cobbled together in response to an emergency deployment.

---------- Original Message ----------
[ Sent by Bill Vodall wa7nwp@... [UniversalDigitalRadio] at 08/25/2014 03:24 PM ]

Subject: Re: [UniversalDigitalRadio] 9600 Packet Qualification
Sent: Mon, Aug 25, 2014 9:02:47 PM



9612 Plus, YES

Timewave PK-96, YES we have one

Argent T3-9670, I'll look into that one

Soundmodem on Pi, we'll cover with Beta Test

Could we do something like this for 9k6 data? It would be nice to
have known test data.

http://wa8lmf.net/TNCtest/


Bill, WA7NWP


Re: 9600 Packet Qualification

Bill Vodall <wa7nwp@...>
 

Subject: Re: [UniversalDigitalRadio] 9600 Packet Qualification
Sent: Mon, Aug 25, 2014 9:02:47 PM



9612 Plus, YES

Timewave PK-96, YES we have one

Argent T3-9670, I'll look into that one

Soundmodem on Pi, we'll cover with Beta Test

Could we do something like this for 9k6 data? It would be nice to
have known test data.

http://wa8lmf.net/TNCtest/


Bill, WA7NWP


Re: 9600 Packet Qualification

"flightresq@..." <flightresq@...>
 

Will this work with an analog scanner that had its discriminator tapped?

Sent from Yahoo Mail on Android



From: bhhoyer@... [UniversalDigitalRadio] ;
To: ;
Subject: Re: [UniversalDigitalRadio] 9600 Packet Qualification
Sent: Mon, Aug 25, 2014 9:02:47 PM

 

9612 Plus, YES

Timewave PK-96, YES we have one

Argent T3-9670, I'll look into that one

Soundmodem on Pi, we'll cover with Beta Test


Re: 9600 Packet Qualification

bhhoyer@...
 

9612 Plus, YES
Timewave PK-96, YES we have one

Argent T3-9670, I'll look into that one

Soundmodem on Pi, we'll cover with Beta Test


Re: 9600 Packet Qualification

Bill Vodall <wa7nwp@...>
 

The UDRX should operate with any 9600 TNC but here is the short list of what we are testing with internally.
Kantronics KPC-9612
I hope you are using the KPC-9612+ - the non-plus is broken out of the
box - just ask Dennis.

Yaesu VX-8G
Kenwood D710
TNC-Pi 9600
The Timewave PK-96 is the basic 9600 TNC available today...
http://www.timewave.com/products/pk96.html

While it's early in its product life cycle, the T3-9670 is going to be
a game changer as basic UHF data radio.

https://www.argentdata.com/catalog/product_info.php?products_id=171

The future of data like this (IM!HO) is software - we have at least
two significant soundcard modem packages that can theoretically handle
9k6.

Dire Wolf - https://home.comcast.net/~wb2osz/site/

UZ7HO - http://uz7.ho.ua/packetradio.htm


Bill, WA7NWP


Prototype 3

john@...
 

UDRX Proto 3 has arrived



9600 Packet Qualification

bhhoyer@...
 

The UDRX should operate with any 9600 TNC but here is the short list of what we are testing with internally.
Kantronics KPC-9612
Yaesu VX-8G
Kenwood D710
TNC-Pi 9600

If there are any other widely deployed 9600 TNCs please let us know and we'll consider providing a beta unit.

Bryan - K7UDR


Re: Are the units ready for sale and what can I do with it?

kb9mwr@...
 

By "looking to be soon", are you just waiting for FCC certification or something?


Re: Are the units ready for sale and what can I do with it?

"John D. Hays" <john@...>
 

We would not hide sales availability! :)  [Looking to be soon!]  Watch http://nwdigitalradio.com

There will be D-STAR support. (Hotspot in base radio, user radio with DV3000)

DMR will require software development that NW Digital Radio does not plan to do, but invites anyone who wants to undertake it to do so -- it requires technology that may require some licensing from Motorola and TDMA.


John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  






On Wed, Aug 13, 2014 at 9:52 AM, n9nwo@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Are the radios ready for sale?

What do I have to do to use it with D-Star or DMR?

N9NWO



Are the units ready for sale and what can I do with it?

n9nwo@...
 

Are the radios ready for sale?

What do I have to do to use it with D-Star or DMR?

N9NWO


Re: Server dont start Img file anyone ?

"John D. Hays" <john@...>
 

Please post the output of AMBEtest2.py

Did you download and build dv3000d?

Is dv3000d running?

What program are you using?  DummyRepeater,  AMBEtools, ... and are you running them on the Pi or remotely?

http://nwdigitalradio.com/preparing-the-raspberry-pi-for-dv3000-applications

Pull down the ALSA version of DummyRepeater if running on Pi.




John D. Hays
K7VE
PO Box 1223, Edmonds, WA 98020-1223 
  



On Tue, Aug 12, 2014 at 7:01 AM, oderljunga@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

I intalled everything as manual said on my img from http://www.westerndstar.co.uk/html/downloads.html 

Reason is that i already have it configured with my 3g dongle and (sakis3g) and so on .. :-) 

I get response from dv3000 :python AMBEtest2.py

seems alright but it say wrote 17 bytes ,, not 5 bytes as in the example .

So question is: what am i doing wrong ? Anyone have a prebuilt img ?

Kindly 

SA7ADV /Kristian 

( if you have a lot of time you may have acesss to my rasp remote , for help me ) 

 



Server dont start Img file anyone ?

oderljunga@...
 

I intalled everything as manual said on my img from http://www.westerndstar.co.uk/html/downloads.html 

Reason is that i already have it configured with my 3g dongle and (sakis3g) and so on .. :-) 

I get response from dv3000 :python AMBEtest2.py

seems alright but it say wrote 17 bytes ,, not 5 bytes as in the example .

So question is: what am i doing wrong ? Anyone have a prebuilt img ?

Kindly 

SA7ADV /Kristian 

( if you have a lot of time you may have acesss to my rasp remote , for help me ) 

 


Re: DV3000 going International

oderljunga@...
 

Nice work ..  Feel free to share :-)  Would be nice to have.


ALSA Verison of Dummyrepeater.

"John Wiseman" <john.wiseman@...>
 

I've made a few improvements to my ALSA version of G4KLX’s Dummyrepeater for the Raspberry PI. It seems to have eliminated the occasional audio overruns.

 

See message #8269 in the ircDDBGateway group for the original post giving my reasons for going to ALSA

 

If you already have dummyrepeater running on your pi, you can just replace the dummyrepeater binary with this:

 

https://dl.dropboxusercontent.com/u/31910649/pidummyrepeater

 

If you need to build from source, you can use this source tree instead of DummyRepeater-20140519.zip

 

https://dl.dropboxusercontent.com/u/31910649/DummyRepeaterBPQJul22.zip

 

Diffs between the original any my source can be found here

 

https://dl.dropboxusercontent.com/u/31910649/DummyRepeater.Jul.diff

 

73, John G8BPQ

 

 

 

 

 

_,_._,___


New Blog Post "Adding a Display to AMBEServer"

"John D. Hays" <john@...>
 

http://nwdigitalradio.com/adding-a-display-to-ambeserver

This display is not yet fully supported on  Banana Pi.

1921 - 1940 of 2588