Date   
Status of UDRC-II?

Chris - KC9AD
 

Hi Guys,

 

I was wondering if you had any kind of update on the UDRC-II availability? Thanks,

 

Chris KC9AD

 

Re: Compass and Duckdns

Joe Detiveaux
 



well the end result is this
pi@compass:/duckdns $ sudo ./duck.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file /root/duckdns/duck.log: No such file or
Warning: directory
curl: (23) Failed writing body (0 != 2)
pi@compass:/duckdns $


Ok just saw the issue it should be /root/Duckdns/   I was only /Duckdns oops..




On Mon, Jul 23, 2018 at 2:04 PM, John D Hays - K7VE <john@...> wrote:
DuckDNS is it's own service.  Just use https://www.duckdns.org/install.jsp  if you want to use it.  There are other DynamicDNS services.  You can turn one on at ircddb.net, that automatically updates on ircddb reports.

Go to http://regsrv.ircddb.net/index.htm and use "Change Dynamic DNS" setting.

If your repeater callsign were NW7DR, then nw7dr.gw.ircddb.net would be the domain name.

On Mon, Jul 23, 2018 at 11:38 AM, Joe Detiveaux <Wa5vyk@...> wrote:
 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx




--


John D. Hays
Edmonds, WA
K7VE

   




--
Joe Detiveaux   WA5VYK
Odessa,Tx

Re: Compass and Duckdns

 

DuckDNS is it's own service.  Just use https://www.duckdns.org/install.jsp  if you want to use it.  There are other DynamicDNS services.  You can turn one on at ircddb.net, that automatically updates on ircddb reports.

Go to http://regsrv.ircddb.net/index.htm and use "Change Dynamic DNS" setting.

If your repeater callsign were NW7DR, then nw7dr.gw.ircddb.net would be the domain name.

On Mon, Jul 23, 2018 at 11:38 AM, Joe Detiveaux <Wa5vyk@...> wrote:
 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx




--


John D. Hays
Edmonds, WA
K7VE

   

Re: Compass and Duckdns

 

Hi Joe,

We have it running on our Echolink System. There is nothing special, just follow the duckdns instructions.

Bryan K7UDR

Compass and Duckdns

Joe Detiveaux
 

 Is there instructions for adding duckdns to the Compass os?
looking for the proper directory etc.



--
Joe Detiveaux   WA5VYK
Odessa,Tx

UDRC ship date

Daniel Corwin
 

Any idea when back orders will be fulfilled? Thank you!

Re: MMDVM & UDRC

 

Thanks John, that helped but there were still a few errors along the way:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNRX.o NXDNRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNTX.o NXDNTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25RX.o P25RX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25TX.o P25TX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o POCSAGTX.o POCSAGTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SampleRB.o SampleRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialController.o SerialController.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialPort.o SerialPort.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialRB.o SerialRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SoundCardReaderWriter.o SoundCardReaderWriter.cpp
SoundCardReaderWriter.cpp: In member function ‘virtual void CSoundCardWriter::entry()’:
SoundCardReaderWriter.cpp:479:85: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 le ((ret = ::snd_pcm_writei(m_handle, m_samples + offset, nSamples - offset)) != (nSamples - offset)) {
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Thread.o Thread.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Utils.o Utils.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFRX.o YSFRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFTX.o YSFTX.cpp
g++ Biquad.o CalDMR.o CalDStarRX.o CalDStarTX.o CalNXDN.o CalP25.o CWIdTX.o DMRDMORX.o DMRDMOTX.o DMRSlotType.o DStarRX.o DStarTX.o FIR.o FIRInterpolator.o IO.o IOUDRC.o MMDVM.o NXDNRX.o NXDNTX.o P25RX.o P25TX.o POCSAGTX.o SampleRB.o SerialController.o SerialPort.o SerialRB.o SoundCardReaderWriter.o Thread.o Utils.o YSFRX.o YSFTX.o -g -lpthread -lasound -lwiringPi -o MMDVM

it did complete the compile. When I attempt ./MMDVM is receive the following:

Link does not exist: /dev/pts/1 <> ttyMMDVM0
Error creating symlink from /dev/pts/1 to ttyMMDVM0
Unable to open serial port on vpty: ttyMMDVM0

I am assuming this indicates that it is not properly configured for the UDRC.  That is what I will be exploring next.

Thanks for the help
Rich, KR4PI
 
 

Re: MMDVM & UDRC

 

I haven't had a chance to build yet, but it looks like you haven't installed the dev package for asoundlib. Try:

sudo apt install libasound2-dev

On Fri, Jul 6, 2018 at 11:02 AM, Rich KR4PI <rich.schnieders@...> wrote:
Does anyone have MMDVM running on their UDRC yet? I have tried to compile and run with the latest compass Cedar but still cannot complete the build. Sudo make results in:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
In file included from MMDVM.cpp:21:0:
SoundCardReaderWriter.h:51:28: fatal error: alsa/asoundlib.h: No such file or directory
 
                            ^
compilation terminated.
Makefile:17: recipe for target 'MMDVM.o' failed
make: *** [MMDVM.o] Error 1

Thanks in advance for the help.

Rich, KR4PI




--


John D. Hays
Edmonds, WA
K7VE

   

Re: MMDVM & UDRC

 

Does anyone have MMDVM running on their UDRC yet? I have tried to compile and run with the latest compass Cedar but still cannot complete the build. Sudo make results in:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
       if (d & 0x08U)
       ^~
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
         i++;
         ^
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
In file included from MMDVM.cpp:21:0:
SoundCardReaderWriter.h:51:28: fatal error: alsa/asoundlib.h: No such file or directory
 
                            ^
compilation terminated.
Makefile:17: recipe for target 'MMDVM.o' failed
make: *** [MMDVM.o] Error 1

Thanks in advance for the help.

Rich, KR4PI

Re: Buster and MacOS upgrade

andrea ottaviani
 

All ok, good job!


Best 73 de IK0MMI
Andrea




Il giorno 14 giu 2018, alle ore 21:59, Annaliese McDermond <nh6z@...> ha scritto:

I’ll take a look when I get a chance, probably this weekend sometime.  Remember it’ll take me a few days to get things pushed through the App Store approval process when I’ve got a good change.

— Anna (NH6Z)

On Jun 14, 2018, at 12:43 PM, rob_eke via Groups.Io <rob_eke@...> wrote:

Kenny,
Thanks, I just reported this issue on Github as well.

73 Rob


Re: Buster and MacOS upgrade

rob_eke
 

Just installed the Buster bug fix V1.21 and all worked again as a charm.
Tks ANNA!

Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

Jerome Kutche <n9lya@...>
 

Hi am New to the group.. I am very interested in this aspect of it as I am hearing there is a larger interest in packet if this were accomplished... How can I help... 73 Jerry N9LYA

Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

Austin - KF7SIW
 
Edited

Thanks for the info. I reposted in the subgroup.

Re: Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

 

We have not done the engineering or testing for such a solution, but it should be possible either at FM or NFM.

The latest direwolf modem has a duplex mode, which should be able to handle repeating.   It would be a matter of wiring up a UDRC in the same manner as we do for D-STAR and running direwolf, let the internal controller on the DR-1X run the voice side and the UDRC/Direwolf on the packet side.  Be sure to CTCSS Xmit and Receive for voice -- your users won't enjoy listening to packet on their voice repeater :)

There is a udrc sub-group here, which would be better to continue the discussion with UDRC users.

Be careful of DR-1X firmware updates since release of DR-2X.

On Fri, Jun 29, 2018 at 10:20 AM, Austin <mail@...> wrote:
We are starting to get a lot more interest in packet, but we can't put two systems up to run a voice repeater and packet node at the same time. If we can get 2 modes by narrow banding it would allow us to increase our capability for emergencies.




--


John D. Hays
Edmonds, WA
K7VE

   

Is it possible to run voice and packet over the same repeater (DR1X) if running 12.5 khz for each?

Austin - KF7SIW
 

We are starting to get a lot more interest in packet, but we can't put two systems up to run a voice repeater and packet node at the same time. If we can get 2 modes by narrow banding it would allow us to increase our capability for emergencies.

Re: UDRC-II to Alinco DR-135TMKIII

Steve Stroh
 

I agree with Kenny, but one "trick" is to ensure that the PS/2
extension cable you pick has all 6 pins wired through. Not all the
pins are used on a PS/2 mouse or keyboard, so some extension cable
vendors don't include the "unneeded" wires. The more reputable vendors
usually specify that yes, their PS/2 extension cables DO have all six
wires.

Another "trick" for the D-9 connector end is that you can buy
connectors that use crimped pins, which is all I use nowadays. Once
you've used crimp pins rather than soldered, you never go back. Quick
Amazon lookup: https://www.amazon.com/Accessories-D-Sub-Standard-Crimp-Plated/dp/B007R2JEI8

Steve N8GNJ

On Mon, Jun 25, 2018 at 11:56 AM Kenny Richards <kenny@...> wrote:

Brian,

This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.

73,
Kenny, KU7M
--
Steve Stroh (personal / general): stevestroh@...

Re: UDRC-II to Alinco DR-135TMKIII

Brian T Schmidt
 

thats awesome Keith thanks for the help...


I pretty much live in the stick and trying to add tech to central NE..HA


Brian


On 6/25/2018 2:24 PM, Keith Williamson wrote:
Hi Brian,

I run an APRS digipeater (KF7DRV-3) 24/7 using the UDRC and DR-135. 

Here is the diagram of the cable I built for it. Just as Kenny suggested, I too started with a keyboard extension cable so that I didn't have to muck with the mini-DIN6. 



73's,

Keith
KF7DRV

On Mon, Jun 25, 2018 at 11:56 AM, Kenny Richards <kenny@...> wrote:
Brian,

This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.

73,
Kenny, KU7M


Re: UDRC-II to Alinco DR-135TMKIII

Keith Williamson
 

Hi Brian,

I run an APRS digipeater (KF7DRV-3) 24/7 using the UDRC and DR-135. 

Here is the diagram of the cable I built for it. Just as Kenny suggested, I too started with a keyboard extension cable so that I didn't have to muck with the mini-DIN6. 



73's,

Keith
KF7DRV

On Mon, Jun 25, 2018 at 11:56 AM, Kenny Richards <kenny@...> wrote:
Brian,

This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.

73,
Kenny, KU7M


Re: UDRC-II to Alinco DR-135TMKIII

Brian T Schmidt
 

Thanks for the help. I think to get the system up and running I will get a premade cable and then make a cable myself for educational purposes.


Brian

On 6/25/2018 2:37 PM, Steve wrote:
To elaborate on Kenny's "Find a keyboard extension cable ..." suggestion, this proved difficult for me until I went here:
https://pchcables.ecomm-search.com/cables/ps2-cables

Steve


Kenny Richards wrote on 06/25/2018 11:56 AM:
Brian,

This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.

73,
Kenny, KU7M



Re: UDRC-II to Alinco DR-135TMKIII

Steve
 

To elaborate on Kenny's "Find a keyboard extension cable ..." suggestion, this proved difficult for me until I went here:
https://pchcables.ecomm-search.com/cables/ps2-cables

Steve


Kenny Richards wrote on 06/25/2018 11:56 AM:

Brian,
This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.
73,
Kenny, KU7M