Date   

Re: Looking for more info

Bernd - OE7BSH <oe7bsh@...>
 

john,

g4klx dummyrepeater works with thumbdv too

http://nwdigitalradio.com/thumbdv-and-dv3000-resource-page
73 de Bernd, OE7BSH
-- 
==================================
oe7bsh@... // http://www.qth.at/oe7bsh
Kitzbühel JN67EK // PGP-ID: 0xCE5C3B36
Repeater als App: http://www.repeaterbook.com
================================== 


On 14.05.2015 21:10, jd_hudson@... [UniversalDigitalRadio] wrote:
 

As a new owner of a ThumbDV and this being my first ever attempt at the Dstar world, I'm really finding this frustrating. As dumb as I am in this Dstar world is there any other software that will work with the ThumbDV other than WinDV that will allow me to access the reflectors and try this mode out? I'm still waiting to hear about the WinDV 1.5.8 but after 4 emails to 3 different email address now in the 3rd day, to be honest, I'm getting frustrated to think this is the only software the ThumbDV uses. 


I appologize if this is the wrong group also... I'm just trying to get my simple brain around this Dstar and right now I'm pedaling up hill in mud

Thanks 

John
KO4XJ


Looking for more info

jd_hudson@...
 

As a new owner of a ThumbDV and this being my first ever attempt at the Dstar world, I'm really finding this frustrating. As dumb as I am in this Dstar world is there any other software that will work with the ThumbDV other than WinDV that will allow me to access the reflectors and try this mode out? I'm still waiting to hear about the WinDV 1.5.8 but after 4 emails to 3 different email address now in the 3rd day, to be honest, I'm getting frustrated to think this is the only software the ThumbDV uses. 

I appologize if this is the wrong group also... I'm just trying to get my simple brain around this Dstar and right now I'm pedaling up hill in mud

Thanks 

John
KO4XJ


Re: Dayton

Steve Stroh N8GNJ <steve.n8gnj@...>
 

Hope you'll consider your many fans who won't make it to Dayton 2015 and show us what you're showing at Dayton. The blog would be ideal, with some photos.



On Thu, May 14, 2015 at 6:39 AM, 'John D. Hays' john@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Booth EH0515

On Thu, May 14, 2015 at 6:23 AM, 'Tom Planer' tepcad@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Will this group be represented at Dayton 2015?

KJ9P




--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  



Re: Dayton

"John D. Hays" <john@...>
 

Booth EH0515

On Thu, May 14, 2015 at 6:23 AM, 'Tom Planer' tepcad@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Will this group be represented at Dayton 2015?

KJ9P




--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


Dayton

"Tom Planer" <tepcad@...>
 

Will this group be represented at Dayton 2015?

KJ9P


WinDV website

jd_hudson@...
 

I've been waiting to hear back from Fred (2 days) to get WinDV 1.5.8 and I've read where others emailed Fred from their contact info and not the web page form. I cannot load their page now or all day  http://dutch-star.eu. Is anyone else having this problem or can they send me Fred's more direct email. 

 

Thanks 

John 

KO4XJ 


Re: Amplifier Product

myyahoo@...
 

Excellent!

I definitely want one now. :-)

- Richard, VE7CVS


Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

Matthew Pitts <daywalker_blade_2004@...>
 

Until such time as someone writes a module for Jonathan's software that allows System Fusion over D-STAR, yes.

Matthew Pitts
N8OHU


On May 10, 2015 9:26:33 AM EDT, "kc9gqr@... [UniversalDigitalRadio]" wrote:
 

So then  if an incoming signal comes in on Fusion  the devices  ignores it for the dstar routing  etc.   correct?  


--
Sent from my Moto X with K-9 Mail. Please excuse my brevity.


Re: Amplifier Product

bhhoyer@...
 

Not recommended. besides if you wanted a DVAP amp you probably are looking for more like a watt output (also not recommended)


Re: Amplifier Product

bhhoyer@...
 

I plan to add a LC Bandpass module as a plug-in option.


Re: Amplifier Product

bhhoyer@...
 

Good part, worth a look!


Re: Amplifier Product

bhhoyer@...
 

That's right, it says 20MHz in some places and 50MHz in others.

Just being conservative.

Bryan


Dayton Hamvention Program, Forum Schedule & Forum Details Attached

Mark Thompson <wb9qzb_groups@...>
 


Dayton Hamvention 
  • Program
  • Forum Schedule 
  • Forum Details 


Attached







Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

kc9gqr@...
 

So then  if an incoming signal comes in on Fusion  the devices  ignores it for the dstar routing  etc.   correct?  


Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

Bill Bennett <bennevl@...>
 

What about the possibility of adding this to a Fusion radio instead of a repeater? Especially in an environment where no internet is available. I have recently seen a video on Youtube of this done but with DVRPTR.
Bill K4IBC


Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

"John D. Hays" <john@...>
 

The D-STAR mode runs on G4KLX dstarrepeater software, which in turn can talk to ircDDBGateway and out to the rest of the ircDDB connected net, including reflectors, STARnet Digital Groups, and callsign routing.

On Sat, May 9, 2015 at 8:19 PM, kc9gqr@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Would you be able to LINK to other Dstar repeaters with this solution



John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

kc9gqr@...
 

Would you be able to LINK to other Dstar repeaters with this solution


Re: Adding D-STAR to a Yaesu DR-1X Fusion Repeater

Matthew Pitts <daywalker_blade_2004@...>
 

John,

This seems interesting; I don't know if I will make it to Dayton this year, but you've got me thinking about the possibilities depending on how this goes together.

Matthew Pitts
N8OHU


From: "'John D. Hays' john@... [UniversalDigitalRadio]"
To: "dstar_digital@..." ; ircddbgateway ; "pcrepeatercontroller@..." ; "UniversalDigitalRadio@..."
Sent: Saturday, May 9, 2015 11:45 AM
Subject: [UniversalDigitalRadio] Adding D-STAR to a Yaesu DR-1X Fusion Repeater

 
Read about it at http://wp.me/p2mAAP-z7

--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  




Adding D-STAR to a Yaesu DR-1X Fusion Repeater

"John D. Hays" <john@...>
 

Read about it at http://wp.me/p2mAAP-z7

--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


Re: Amplifier Product

myyahoo@...
 

I would buy one!

Something that wideband could be subject to swamping around here, I might want a filter in front of it - but it would be worth experimenting with, so to option of a power tee would be welcome. Looks useful as a driver amp, too, for some SDR experiments.

- Richard, VE7CVS