Date   
Re: Win DV Software

sar01@...
 

John I used the contact form on the website. Randy kindly sent me the link this morning.

Cheers

Re: Win DV Software

bhhoyer@...
 

Have you reported your issues on the DummyRepeater Group?

Bryan - K7UDR

Re: Win DV Software

"John D. Hays" <john@...>
 

Did you contact Fred at dutch-star.eu ?

On Tue, Apr 14, 2015 at 11:29 PM, sar01@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

 Can someone please send me the software for Win DV that works with the ThumbDV.

I tried to contact someone on the site but no response after a week so far.

Had no luck in finding a stable version of Dummy Repeater, all had issues.




--


John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  

Re: Win DV Software

KA1MXL <ka1mxl@...>
 

Send me email 


On Apr 15, 2015, at 2:29 AM, sar01@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

 Can someone please send me the software for Win DV that works with the ThumbDV.

I tried to contact someone on the site but no response after a week so far.

Had no luck in finding a stable version of Dummy Repeater, all had issues.

D-STAR Demo at NAB

"John D. Hays" <john@...>
 

Don, WB5EKU, will be demoing D-STAR using the ThumbDV™ on REF012A.

I don't have exact details but i believe this will be during the "Amateur Radio Operators Reception" which is at 1800-2000 Pacific Time Today, April 15th (0100Z April 16th) 



John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  

Win DV Software

sar01@...
 

 Can someone please send me the software for Win DV that works with the ThumbDV.

I tried to contact someone on the site but no response after a week so far.

Had no luck in finding a stable version of Dummy Repeater, all had issues.

Re: here is my digital dstar radio

usmc8800@...
 

Nice

Re: 44 addresses / JNOS 56K / Gateway Security ?

ve7dhm@...
 

After a couple of emails my 44 address allocation has come through thanks to Luc the co-ordinator
for Canada.  Onward and upward with testing with what equipment I have at the moment until the
UDRXs arrive.

Paul VE7DHM

Re: DVAPor DV-mega?

Randy Wilkinson <randy@...>
 

I'll be polite on behalf of Brian and John. 

This is the group for discussion of the UDRX-440 and other products from the smart people at NW Digital Radio.  It is probably not appropriate to ask what are the best alternative choices to the UDRX-440.  That is what your question is asking.

My I suggest you join us on the Raspberry Pi D-STAR net tonight at 7pm pacific time on D-STAR reflector 35C.  You'll meet lots of other hams that have already done what you are asking about.  Your question will be welcomed there.

Randy-W4LKS
Spokane. WA

On 4/13/2015 6:34 AM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I am waiting on my 51A to arrive and thought I would get a jump on setting up a hot spot at home and something I can take mobile on the road.

 

I see that I have a choice between the DVAP and the DV-MEGA. What are the pros-cons to using either one? Is either refereed over the other?


Any other input or suggestions?


Re: no noe responds

Mickey Baker <fishflorida@...>
 

Glad I could help. If your message this morning had arrived 10 minutes later, I'd only be getting to it now!

Mickey

On Sun, Apr 12, 2015 at 6:56 PM, ka1mxl@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Mickey,


Thanks for all your help I was finally able to get on dstar and have made several contacts. You were a godsend! 




--
Mickey Baker, N4MB
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” Teton Lakota, American Indian Saying.

Re: no noe responds

"John D. Hays" <john@...>
 

You can use XRF and DCS reflectors without registration.

On Apr 12, 2015 8:28 AM, "KA1MXL ka1mxl@... [UniversalDigitalRadio]" <UniversalDigitalRadio@...> wrote:
 

Boy this is a lot of work. Ok I submitted registration. 


On Apr 12, 2015, at 1:15 AM, Mickey Baker fishflorida@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

If you haven't already registered, do so at http://www.w4ab.org/Dstar.do, then send me an email message. I'll summit it within a few hours or sooner and it should be propagated within minutes thereafter.


Mickey N4MB, SYSOP W4AB
Callsign AT ARRL dot net

On Saturday, April 11, 2015, KA1MXL ka1mxl@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Randy

How long does that take? I finally found it by googling it! 


On Apr 11, 2015, at 3:29 PM, Randy Wilkinson randy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Your callsign is not registered on the USTrust system.  You must register your callsign to be heard on any USTrust repeaters and reflectors.

http://www.dstargateway.org/D-Star_Registration.html

Randy-W4LKS

On 4/11/2015 12:14 PM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??




--
Mickey Baker, N4MB
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” Teton Lakota, American Indian Saying.

Re: no noe responds

KA1MXL <ka1mxl@...>
 

Boy this is a lot of work. Ok I submitted registration. 


On Apr 12, 2015, at 1:15 AM, Mickey Baker fishflorida@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

If you haven't already registered, do so at http://www.w4ab.org/Dstar.do, then send me an email message. I'll summit it within a few hours or sooner and it should be propagated within minutes thereafter.


Mickey N4MB, SYSOP W4AB
Callsign AT ARRL dot net

On Saturday, April 11, 2015, KA1MXL ka1mxl@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Randy

How long does that take? I finally found it by googling it! 


On Apr 11, 2015, at 3:29 PM, Randy Wilkinson randy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Your callsign is not registered on the USTrust system.  You must register your callsign to be heard on any USTrust repeaters and reflectors.

http://www.dstargateway.org/D-Star_Registration.html

Randy-W4LKS

On 4/11/2015 12:14 PM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??




--
Mickey Baker, N4MB
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” Teton Lakota, American Indian Saying.

Re: no noe responds

Mickey Baker <fishflorida@...>
 

If you haven't already registered, do so at http://www.w4ab.org/Dstar.do, then send me an email message. I'll summit it within a few hours or sooner and it should be propagated within minutes thereafter.

Mickey N4MB, SYSOP W4AB
Callsign AT ARRL dot net


On Saturday, April 11, 2015, KA1MXL ka1mxl@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:
 

Randy

How long does that take? I finally found it by googling it! 


On Apr 11, 2015, at 3:29 PM, Randy Wilkinson randy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Your callsign is not registered on the USTrust system.  You must register your callsign to be heard on any USTrust repeaters and reflectors.

http://www.dstargateway.org/D-Star_Registration.html

Randy-W4LKS

On 4/11/2015 12:14 PM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??




--
Mickey Baker, N4MB
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” Teton Lakota, American Indian Saying.

Re: no noe responds

KA1MXL <ka1mxl@...>
 

Randy

How long does that take? I finally found it by googling it! 


On Apr 11, 2015, at 3:29 PM, Randy Wilkinson randy@... [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Your callsign is not registered on the USTrust system.  You must register your callsign to be heard on any USTrust repeaters and reflectors.

http://www.dstargateway.org/D-Star_Registration.html

Randy-W4LKS

On 4/11/2015 12:14 PM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??


Re: ThumbDV and WinDV 1.5.8

k8rjl@...
 

Thanks Kevin,

I heard from Fred today as a matter of fact.  His software is top notch in my opinion. The ThumbDV is working great with it on Windows 7 Pro 64-bit.

Rob

Re: no noe responds

Randy Wilkinson <randy@...>
 

Your callsign is not registered on the USTrust system.  You must register your callsign to be heard on any USTrust repeaters and reflectors.

http://www.dstargateway.org/D-Star_Registration.html

Randy-W4LKS

On 4/11/2015 12:14 PM, ka1mxl@... [UniversalDigitalRadio] wrote:
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??


no noe responds

ka1mxl@...
 

I thought my ThumbDV was up and running. Did what most good operators do, LISTEN. Today I tried making a test call and I had no replies. I have been trying to call all day and no one responds even when I hear them. When I click on transmit it looks like it is working and I can see the xmit led move up and down with my voice but again no replies. WHat did I miss or do wrong now??

Re: ThumbDV and WinDV 1.5.8

KA1MXL <ka1mxl@...>
 

Rob

I sent email thru contact us page. It was just a few hours and he was back in touch with me. 

Good luck with the thumbdv. Simple to use and setup. Even I can do it. 


On Apr 11, 2015, at 2:35 AM, k8rjl@...m [UniversalDigitalRadio] <UniversalDigitalRadio@...> wrote:

 

Hi Kevin,


If I may ask you Kevin, did you use the Feedback/Comments section of Fred's website to contact him for the software?  I sent a message through that portion of the website but never heard a thing back. I'm still waiting for my ThumbDV to arrive so hopefully I'll have the software before it arrives.

Thanks for the info,

Rob

Re: ThumbDV and WinDV 1.5.8

k8rjl@...
 

Hi Kevin,

If I may ask you Kevin, did you use the Feedback/Comments section of Fred's website to contact him for the software?  I sent a message through that portion of the website but never heard a thing back. I'm still waiting for my ThumbDV to arrive so hopefully I'll have the software before it arrives.

Thanks for the info,

Rob

Re: UDRX, LinBPQ and 9600

shansen@...
 

Thanks John & John. Can't wait to get one in my hands.

73,
Steve KB1TCE