Date   
Re: nwdr thumb drive

Brad NK8J <bradnk8j@...>
 

have you updated you Reflector lists?

On 10/5/2018 8:00 PM, TOMMY wrote:

worked fine for few weeks, useing Windv,  left alone for 2 weeks turned back on and now "dplus connection (ref whatever) failed!)

any ideas.

Thumd drive still works useing Blue dv 





Re: nwdr thumb drive

james
 

give me a call jimbo ---458-209-1221


On 10/6/2018 8:49 PM, Brad NK8J wrote:
have you updated you Reflector lists?

On 10/5/2018 8:00 PM, TOMMY wrote:

worked fine for few weeks, useing Windv,  left alone for 2 weeks turned back on and now "dplus connection (ref whatever) failed!)

any ideas.

Thumd drive still works useing Blue dv 






Re: DPlus connection to REF001C failed - WinDV on WIn10 #cal-invite

TOMMY <Tommyleb@...>
 

have same issue, worked great for few weeks, didnt use the nwdr thumb dv for about a week and half , turned on and " d plus connection failed{ref anyone} failed. any ideas,thanks KM4VTE Tommy

NOAA issued an ALTTP2-0239 UTC - High speed particles escaped the sun!

A Schwarz
 

Hi Everybody;

 

NOAA issued a ALTTP2 alert. This is not the kind of alert I would expect at solar minimum. I also honestly have to admit this is the first time I see it. It states that we will be getting nit by a plasma cloud at the speed of almost 900km/s. This is fast! The only indication that there was a masse ejection is a B class solar x-ray-flux spike. Kp and proton flux are low too.

Conditions at the MDSR test station are still reasonable good, but if the type II emission hits we will get some serious propagation change. We cannot predict if this will be good or bad for    

 

Stay tuned!

 

Current conditions at the MDSR test station:

80m open S5

40m open S4

30m open S3

20m open S4

15m closed S3

10m closed S1

 

Watch it live here:

http://users.skynet.be/myspace/mdsr/

 

All the best and 73;

 

Alex - VE7DXW

===============================================================================

NOAA Alert:

 

Space Weather Message Code: ALTTP2

Serial Number: 1068

Issue Time: 2018 Oct 12 0239 UTC

 

ALERT: Type II Radio Emission

Begin Time: 2018 Oct 12 0152 UTC

Estimated Velocity: 864 km/s

www.swpc.noaa.gov/noaa-scales-explanation

Description: Type II emissions occur in association with eruptions on the sun and typically indicate a coronal mass ejection is associated with a flare event.

Re: DPlus connection to REF001C failed - WinDV on WIn10 #cal-invite

Pete N
 

The problem I reported was caused by a defective router. However, even when I took my netbook to another location I found only the Free*Star VE3TNK (ve3tnk.homelinux.net) callsign server worked. 

I tried WinDV a couple of days ago and I just tried it again (at a different location on a different computer). Both times/places it would not connect even using the Free*Star server.  the problem is the server is unreachable. I can't ping it. Tracert shows request timed out an the 9th hop.

WinDV has not been updated in a long time. Apparently there have been enough changes in DSTAR that WinDV no longer works. 

I followed the advice I got on https://www.facebook.com/groups/DSTAR.Users.Group downloaded and installed BlueDV. It works great with the ThumbDV.

The only disadvantage is I can't use it on my old Dell Mini 9 with XP. But there is a Linux version so I will probably convert the Mini 9 to Linux Mint.

Re: DPlus connection to REF001C failed - WinDV on WIn10 #cal-invite

TOMMY <Tommyleb@...>
 

Good to know, my windv app stop working few weeks ago, so i use bluedv, works
great with my red nwdr thumbdr. Use on old dell laptop with windows 7.
73, KM4VTE, Tommy



Sent from my Verizon, Samsung Galaxy smartphone

Re: DPlus connection to REF001C failed - WinDV on WIn10 #cal-invite

Kk4lyn@...
 

I am have trouble getting blue dv to conect to dmr using bandmast


On Sun, Oct 14, 2018, 2:54 PM Pete N <kc2wi.afa2cq@...> wrote:
The problem I reported was caused by a defective router. However, even when I took my netbook to another location I found only the Free*Star VE3TNK (ve3tnk.homelinux.net) callsign server worked. 

I tried WinDV a couple of days ago and I just tried it again (at a different location on a different computer). Both times/places it would not connect even using the Free*Star server.  the problem is the server is unreachable. I can't ping it. Tracert shows request timed out an the 9th hop.

WinDV has not been updated in a long time. Apparently there have been enough changes in DSTAR that WinDV no longer works. 

I followed the advice I got on https://www.facebook.com/groups/DSTAR.Users.Group downloaded and installed BlueDV. It works great with the ThumbDV.

The only disadvantage is I can't use it on my old Dell Mini 9 with XP. But there is a Linux version so I will probably convert the Mini 9 to Linux Mint.

Re: [New post] DRAWS Production Status

 


On Mon, Oct 15, 2018, 07:09 NW Digital Radio <donotreply@...> wrote:
k7udr posted: "DRAWS Early Adopters! Sales has gone over our initial run. That combined with an industry wide shortage on capacitors, has delayed assembly. We hope to have them shipping by the end of the month. We will confirm later this week once the shortages have "

New post on NW Digital Radio

DRAWS Production Status

by k7udr

DRAWS Early Adopters!

Sales has gone over our initial run. That combined with an industry wide shortage on capacitors, has delayed assembly. We hope to have them shipping by the end of the month. We will confirm later this week once the shortages have been filled.

Thanks,
Bryan K7UDR

k7udr | October 15, 2018 at 7:08 am | Categories: DRAWS | URL: https://wp.me/p2mAAP-1o9

Unsubscribe to no longer receive posts from NW Digital Radio.
Change your email settings at Manage Subscriptions.

Trouble clicking? Copy and paste this URL into your browser:
http://nwdigitalradio.com/draws-production-status/


Shipping

Andy Pagoota
 

Ordered my ThumbDV yesterday. Any idea how long it takes for shipping to North Carolina?

Re: Shipping

Richard W4JXA
 

I had one sent to South Carolina. As I recall it took 4 days . Maybe check the mail on Friday. Great product, I have several of them. Keep one with me along with àn OTG cable

W4JXA Richard 73

Re: Shipping

mike tabb <Kk4lyn@...>
 

If you use bluedv how did you get bm to work on dmr


On Wed, Oct 17, 2018, 10:23 AM Richard W4JXA via Groups.Io <w4jxa=yahoo.com@groups.io> wrote:
I had one sent to South Carolina. As I recall it took 4 days . Maybe check the mail on Friday. Great product, I have several of them. Keep one with me along with àn OTG cable

W4JXA Richard 73

Re: Shipping

 

Your order is being processed and expect that it will go out today or tomorrow.  At the time it is fulfilled, and email with a tracking number will go to the email address that was associated with the order at the time the order was placed.

The orders are sent US Mail and it will leave from Friday Harbor, WA and travel to North Carolina.

On Wed, Oct 17, 2018 at 8:50 AM <w4wno@...> wrote:
Ordered my ThumbDV yesterday. Any idea how long it takes for shipping to North Carolina?



--


John D. Hays
Edmonds, WA
K7VE

   

Re: Shipping

Andy Pagoota
 

Thanks for the information, John. A friend bought this for me as a gift, so you have 2 email addresses. One is associated with his card and the other is mine which was entered on the "Ship To" side of the form. Is there any way I can assure that I get that email at w4wno@... instead of him?


On 10/17/2018 12:52 PM, John D Hays - K7VE wrote:
Your order is being processed and expect that it will go out today or tomorrow.  At the time it is fulfilled, and email with a tracking number will go to the email address that was associated with the order at the time the order was placed.

The orders are sent US Mail and it will leave from Friday Harbor, WA and travel to North Carolina.

On Wed, Oct 17, 2018 at 8:50 AM <w4wno@...> wrote:
Ordered my ThumbDV yesterday. Any idea how long it takes for shipping to North Carolina?


--


John D. Hays
Edmonds, WA
K7VE

   


Re: Shipping

Raymond Burns
 

Mine took about a week


On Wed, Oct 17, 2018 at 11:50 AM <w4wno@...> wrote:
Ordered my ThumbDV yesterday. Any idea how long it takes for shipping to North Carolina?

Re: Shipping

Richard W4JXA
 

Just use the drop down on the left, select DMR then enter the TG, ie 3100, hit the connect switch, then green telephone symbol, quick key for immediate access 

W4JXA Richard 73

Re: Shipping

Mike Moore
 

I googled "OTG cable".  Do you use that to attach the ThumbDV to your cell phone?  BlueDV?  73, KC2NM

Mike Moore
mikemoore@...
Cell, Text (585) 721-0011
Google Voice (585) 310-1812


Re: Shipping

Richard W4JXA
 

Yes. On the go cable. Not all cell phones can use an OTG. My phones are Samsung  J7 and a J3. Most one to two year old Cells are able to use them. Battery drain on mine runs 10 to 15 percent per hour running Thumb dv, on average. 

W4JXA Richard 73

On Wed, Oct 17, 2018 at 3:47 PM, Mike Moore
<mikemoore@...> wrote:
I googled "OTG cable".  Do you use that to attach the ThumbDV to your cell phone?  BlueDV?  73, KC2NM

Mike Moore
mikemoore@...
Cell, Text (585) 721-0011
Google Voice (585) 310-1812


Thumb DV no REF Dplus connection

Michael Register
 

I have been trying to connect to a local ref29a, the thumb dv says no, can connect to xrf and dcs but not ref reflector.
Has anyone had this problem or knows how to fix it?

Re: Thumb DV no REF Dplus connection

 

If you are able to connect to XRF reflectors, your ThumbDV is fine.

This is a software application question.  The applications look up reflectors and make the connection and handle the protocol.  The ThumbDV converts audio to AMBE and AMBE to audio, everything else is the application.

If you list what software you are using, and any error messages you are getting, someone may be able to help.  BTW, it would REF029A (in Logan UT), the 0 is significant.

The right subgroup is https://nw-digital-radio.groups.io/g/ambe/topics

Two typical blockers are, either your callsign isn't registered with US Trust (http://regist.dstargateway.org) or you have a bad address for the reflector.

On Fri, Oct 19, 2018 at 4:43 PM Michael Register via Groups.Io <gadget9503=yahoo.com@groups.io> wrote:
I have been trying to connect to a local ref29a, the thumb dv says no, can connect to xrf and dcs but not ref reflector.
Has anyone had this problem or knows how to fix it?



--


John D. Hays
Edmonds, WA
K7VE

   

schemaic for thumbdv

icstars@...
 

Does someone have a schematic for the thumbdv? If available, I would like a copy. If not , I need to know the value of a few parts.