Date   
Bridging the digital voice and data gap

Matthew Pitts <daywalker_blade_2004@...>
 

This topic seems more appropriate to this group than any of the others that I'm in here, as the hardware should support at least the three main modes in use. I know some folks might get their knickers in a twist over this, but interoperability between DMR, D-Star and NXDN is something I feel would be of benefit to all digital voice hams, and would eliminate the (intentional) animosity I've seen in certain groups if someone brings up connecting certain "incompatible" hardware together.

I know that the DMR core network standard implies that it is possible to connect a Hytera repeater to a Motorola Mototrbo repeater even though they use incompatible manufacturer specific functions; there are similar potential issues with connecting Icom IDAS repeater to Kenwood NEXEDGE repeaters. D-Star is semi-unique in that it's network protocol is the same as it's over the air protocol, and this is what attracted me to it in the first place, from a hardware and software design perspective. Is anyone else interested in discussion on this subject?

Matthew Pitts
N8OHU


Sent from Yahoo! Mail on Android

Re: Bridging the digital voice and data gap

Tyrell Berry <kd7kuj@...>
 

Not trying to start a flame war (but probably will...  I'm sorry in advance), but I feel it's important to point out.  Anytime you go from analog to digital, audio quality/information is lost.  If you go from D* to DMR, you are taking spoken voice (analog) and making it digital (IMBE) in your radio, the repeater receives the bits and spits out audio again (digital to analog), and encodes it AGAIN as digital (AMBE) to be sent to the received, where it once again gets converted to analog.  That's two A-D conversions...  each loses quality, and at these bit rates, we don't have much budget for dropping additional audio info.  People already complain about it sounding tinny!

SO, for me it's not a religious "thou shalt not inter-connect technologies" argument, it's more of a "the sacrifices made MAY make such a project technically unfeasible"

Just food for thought.

On Jul 31, 2012 6:05 PM, "Matthew Pitts" <daywalker_blade_2004@...> wrote:
 

This topic seems more appropriate to this group than any of the others that I'm in here, as the hardware should support at least the three main modes in use. I know some folks might get their knickers in a twist over this, but interoperability between DMR, D-Star and NXDN is something I feel would be of benefit to all digital voice hams, and would eliminate the (intentional) animosity I've seen in certain groups if someone brings up connecting certain "incompatible" hardware together.

I know that the DMR core network standard implies that it is possible to connect a Hytera repeater to a Motorola Mototrbo repeater even though they use incompatible manufacturer specific functions; there are similar potential issues with connecting Icom IDAS repeater to Kenwood NEXEDGE repeaters. D-Star is semi-unique in that it's network protocol is the same as it's over the air protocol, and this is what attracted me to it in the first place, from a hardware and software design perspective. Is anyone else interested in discussion on this subject?

Matthew Pitts
N8OHU


Sent from Yahoo! Mail on Android

Re: Bridging the digital voice and data gap

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 04:34 PM 8/1/2012, you wrote:


Not trying to start a flame war (but probably will... I'm sorry in advance), but I feel it's important to point out. Anytime you go from analog to digital, audio quality/information is lost. If you go from D* to DMR, you are taking spoken voice (analog) and making it digital (IMBE) in your radio, the repeater receives the bits and spits out audio again (digital to analog), and encodes it AGAIN as digital (AMBE) to be sent to the received, where it once again gets converted to analog. That's two A-D conversions... each loses quality, and at these bit rates, we don't have much budget for dropping additional audio info. People already complain about it sounding tinny!

SO, for me it's not a religious "thou shalt not inter-connect technologies" argument, it's more of a "the sacrifices made MAY make such a project technically unfeasible"
While the codec conversions are unavoidable, you do NOT have to go all the way back to analog, if you are able to build some suitable hardware. That's already been done for D-STAR, with the DV Dongle being suitable for such a transcoder.

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

Matthew Pitts <daywalker_blade_2004@...>
 

Tony,

Exactly; all of the DV technologies I mentioned use some form of AMBE, so it's a matter of conversion of bit rates and constructing the proper carrier code for the target system. We already have code for D-Star amd can write code for DMR and NXDN as well. The hardest part will be converting from FDMA to TDMA and back, as the time slots could both have information on them that needs to be handled in some way.

Matthew Pitts
N8OHU

Sent from Yahoo! Mail on Android

Re: Bridging the digital voice and data gap

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 07:53 PM 8/1/2012, Matthew Pitts wrote:

Tony,

Exactly; all of the DV technologies I mentioned use some form of AMBE, so it's a matter of conversion of bit rates and constructing the proper carrier code for the target system. We already have code for D-Star amd can write code for DMR and NXDN as well. The hardest part will be converting from FDMA to TDMA and back, as the time slots could both have information on them that needs to be handled in some way.
Agree totally, all the supervisory information needs to be handled properly. I'd like to see this sort of work happen. As for the technologies, I'm wary of TDMA, because it has inherent range limits (since the speed of light is finite), and over here, distance is king.

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

"Reid" <reid.crowe@...>
 

Will the UDR56K4 be able to support the switching speeds required for DMR?

-Reid N0RC

--- In UniversalDigitalRadio@..., Matthew Pitts <daywalker_blade_2004@...> wrote:

This topic seems more appropriate to this group than any of the others that I'm in here, as the hardware should support at least the three main modes in use. I know some folks might get their knickers in a twist over this, but interoperability between DMR, D-Star and NXDN is something I feel would be of benefit to all digital voice hams, and would eliminate the (intentional) animosity I've seen in certain groups if someone brings up connecting certain "incompatible" hardware together.

I know that the DMR core network standard implies that it is possible to connect a Hytera repeater to a Motorola Mototrbo repeater even though they use incompatible manufacturer specific functions; there are similar potential issues with connecting Icom IDAS repeater to Kenwood NEXEDGE repeaters. D-Star is semi-unique in that it's network protocol is the same as it's over the air protocol, and this is what attracted me to it in the first place, from a hardware and software design perspective. Is anyone else interested in discussion on this subject?

Matthew Pitts
N8OHU


Sent from Yahoo! Mail on Android

Re: Bridging the digital voice and data gap

Bryan Hoyer <bhhoyer@...>
 

Hi Reid,

DMR is NOT one of the modes supported at launch. There has been some interest in DMR mostly in a future duplex repeater configuration which doesn't require turning the PA around.

As a client, the architecture is able to support the timing for TDMA in the FPGA (software lacks the required granularity). and the TX/RX switch is well under the 1.5ms switch time.

So that makes this a definite maybe.

Bryan

Re: Bridging the digital voice and data gap

Tyrell Berry <kd7kuj@...>
 

Maybe your all confused...  audio doesn't have to come out a speaker to be analog.  To be perfectly clear, the dv-dongle is still converting a digital signal to an  analog one...  and a second chip is required to go into any another digital code. Even if a lossless digital codec is used in between (like wave or similar), the conversion to a lossy format like AMBE is the troublesome one...  not the conversion to analog. Yes, less signal is lost vs going out a speaker and into a  microphone, but the principles I stated before are largely the same, and I'm not convinced the resulting stream of bits will be legible audio.

As for the conversion from fdma to tdma, if NAT can convert ip addresses, this should be easy.

On Aug 1, 2012 7:54 AM, "Reid" <reid.crowe@...> wrote:
 

Will the UDR56K4 be able to support the switching speeds required for DMR?

-Reid N0RC

--- In UniversalDigitalRadio@..., Matthew Pitts wrote:
>
> This topic seems more appropriate to this group than any of the others that I'm in here, as the hardware should support at least the three main modes in use. I know some folks might get their knickers in a twist over this, but interoperability between DMR, D-Star and NXDN is something I feel would be of benefit to all digital voice hams, and would eliminate the (intentional) animosity I've seen in certain groups if someone brings up connecting certain "incompatible" hardware together.
>
> I know that the DMR core network standard implies that it is possible to connect a Hytera repeater to a Motorola Mototrbo repeater even though they use incompatible manufacturer specific functions; there are similar potential issues with connecting Icom IDAS repeater to Kenwood NEXEDGE repeaters. D-Star is semi-unique in that it's network protocol is the same as it's over the air protocol, and this is what attracted me to it in the first place, from a hardware and software design perspective. Is anyone else interested in discussion on this subject?
>
> Matthew Pitts
> N8OHU
>
>
> Sent from Yahoo! Mail on Android
>

Test

john@...
 

AW: Test

"siegfried jackstien" <siegfried.jackstien@...>
 

- . ... -

..--..

-----Ursprüngliche Nachricht-----
Von: UniversalDigitalRadio@...
[mailto:UniversalDigitalRadio@...] Im Auftrag von
john@...
Gesendet: Mittwoch, 1. August 2012 17:25
An: UniversalDigitalRadio@...
Betreff: [UniversalDigitalRadio] Test






Re: Bridging the digital voice and data gap

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 01:43 AM 8/2/2012, you wrote:


Maybe your all confused... audio doesn't have to come out a speaker to be analog. To be perfectly clear, the dv-dongle is still converting a digital signal to an analog one... and a second chip is required to go into any another digital code. Even if a lossless digital codec is used in between (like wave or similar), the conversion to a lossy format like AMBE is the troublesome one... not the conversion to analog. Yes, less signal is lost vs going out a speaker and into a microphone, but the principles I stated before are largely the same, and I'm not convinced the resulting stream of bits will be legible
No, the DV dongle converts a PCM bitstream to an AMBE coded bitstream and vice-versa. There is no analog audio near a DV Dongle (have you ever managed to get an analog signal down a USB bus? ;) ).

Conversions between codecs are better when there is no intervening A/D and D/A pair to go through, so running a DV Dongle (or equivalent) back to back with an IMBE equivalent will give the best result possible. You are right in one thing, the result won't be perfect, may not be pretty, but it may be functional. Only one way to find out! :) If the number of transcodes is limited to the bare minimum (i.e. 1), then you may get along with it.

Oh, and a case in point, telephony systems (e.g. Asterisk) do convert between codecs when necssary, so that you can attach any phone to the system, regardless of what code the network is running. The phone just needs to be capable of using at least one of the codecs Asterisk supports. Asterisk also decodes and recodes any participants in a conference call. Of course, most of the codecs used in telephony are a lot less "aggressive", but the principle works rather well.


73 de VK3JED / VK3IRL
http://vkradio.com

Re: Test

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 03:24 AM 8/2/2012, you wrote:



------------------------------------
Little bit of power supply hum there, and some signs of RF feedback. ;)

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

"qrv@..." <qrv@...>
 

This one tickled my fancy ...

Perhaps one could modulate the 5v line?

Just sayin' ... ;-)

Tony Langdon, VK3JED wrote: (have you ever managed to get an analog
signal down a USB bus? ;) ).
--

Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22

Re: Bridging the digital voice and data gap

"Howard Small" <howard@...>
 

Hmm. Not sure how they do it but the IC-7200 passes the audio over a USB connection in parallel with the CI-V commands.

 

Howard

VK4BS

 

From: UniversalDigitalRadio@... [mailto:UniversalDigitalRadio@...] On Behalf Of qrv@...
Sent: Thursday, 2 August 2012 12:01
To: UniversalDigitalRadio@...
Subject: Re: [UniversalDigitalRadio] Re: Bridging the digital voice and data gap

 

 

This one tickled my fancy ...

Perhaps one could modulate the 5v line?

Just sayin' ... ;-)

> Tony Langdon, VK3JED wrote: (have you ever managed to get an analog
> signal down a USB bus? ;) ).

--

Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22

Re: Bridging the digital voice and data gap

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 12:30 PM 8/2/2012, you wrote:


Hmm. Not sure how they do it but the IC-7200 passes the audio over a USB connection in parallel with the CI-V commands.
Well, that one's easy, the audio is still in digital form, it's rather like a serial dongle and a sound fob on the one USB hub. :)

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

Ian Wade G3NRW <g3nrw-radio@...>
 

___Original Message_________________________________________
From: "Tony Langdon, VK3JED" <vk3jed@...>
Date: Thu, 2 Aug 2012 Time: 07:32:08

There is no analog audio near a DV Dongle (have you
ever managed to get an analog signal down a USB bus? ;) ).
Yup. I do it every day. On my TS-590S. Mostly analog data tones, but sometimes analog DV tones. Audio codec in the radio, codec driver in the PC. USB cable in between. Works very well.

:-)

--
73
Ian, G3NRW

The TS-590S Resources Page:
http://homepage.ntlworld.com/wadei/ts-590s.htm

The TS-990S Resources Page:
http://homepage.ntlworld.com/wadei/ts-990.htm

Re: AW: Bridging the digital voice and data gap

"siegfried jackstien" <siegfried.jackstien@...>
 

Usb soundcard?!?

Dg9bfc

Sigi

-----Ursprüngliche Nachricht-----
Von: UniversalDigitalRadio@...
[mailto:UniversalDigitalRadio@...] Im Auftrag von Howard Small
Gesendet: Donnerstag, 2. August 2012 02:30
An: UniversalDigitalRadio@...
Betreff: RE: [UniversalDigitalRadio] Re: Bridging the digital voice and
data gap



Hmm. Not sure how they do it but the IC-7200 passes the audio over a USB
connection in parallel with the CI-V commands.



Howard

VK4BS



From: UniversalDigitalRadio@...
[mailto:UniversalDigitalRadio@...] On Behalf Of qrv@...
Sent: Thursday, 2 August 2012 12:01
To: UniversalDigitalRadio@...
Subject: Re: [UniversalDigitalRadio] Re: Bridging the digital voice and
data gap





This one tickled my fancy ...

Perhaps one could modulate the 5v line?

Just sayin' ... ;-)

Tony Langdon, VK3JED wrote: (have you ever managed to get an analog
signal down a USB bus? ;) ).
--

Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22

Re: Bridging the digital voice and data gap

Matthew Pitts <daywalker_blade_2004@...>
 

Yes, there are several high end transceivers that have an integrated sound card specifically for use on the various HF digital modes.

Matthew Pitts
N8OHU

Sent from Yahoo! Mail on Android



From: Tony Langdon, VK3JED ;
To: ;
Subject: RE: [UniversalDigitalRadio] Re: Bridging the digital voice and data gap
Sent: Thu, Aug 2, 2012 10:56:09 AM

 

At 12:30 PM 8/2/2012, you wrote:

>Hmm. Not sure how they do it but the IC-7200 passes the audio over a
>USB connection in parallel with the CI-V commands.

Well, that one's easy, the audio is still in digital form, it's
rather like a serial dongle and a sound fob on the one USB hub. :)

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

"Tony Langdon, VK3JED" <vk3jed@...>
 

At 06:59 PM 8/2/2012, you wrote:
___Original Message_________________________________________
From: "Tony Langdon, VK3JED" <vk3jed@...>
Date: Thu, 2 Aug 2012 Time: 07:32:08

There is no analog audio near a DV Dongle (have you
ever managed to get an analog signal down a USB bus? ;) ).
>

Yup. I do it every day. On my TS-590S. Mostly analog data tones, but
sometimes analog DV tones. Audio codec in the radio, codec driver in the
PC. USB cable in between. Works very well.
But you are NOT passing analog audio down the USB cable. You're passing digital PCM to a USB sound device built into the radio. Semantics are important in this discussion, and my point still stands, there are no analog signals around a DV Dongle, just an AMBE coded bitstream and a PCM bitstream (plus commands to the dongle and status/responses back).

73 de VK3JED / VK3IRL
http://vkradio.com

Re: Bridging the digital voice and data gap

Tyrell Berry <kd7kuj@...>
 

Fair enough, I stand corrected.  Even as I hit send, I more or less knew I was wrong and should have said simply "uncompressed audio".  Still, every time you convert to a lossy format, audio data is lost, and we don't have much to work with from the get-go.

On Aug 2, 2012 3:22 PM, "Tony Langdon, VK3JED" <vk3jed@...> wrote:
 

At 06:59 PM 8/2/2012, you wrote:
>___Original Message_________________________________________
>From: "Tony Langdon, VK3JED" <vk3jed@...>
>Date: Thu, 2 Aug 2012 Time: 07:32:08
>
> >There is no analog audio near a DV Dongle (have you
> >ever managed to get an analog signal down a USB bus? ;) ).
>
> >
>
>Yup. I do it every day. On my TS-590S. Mostly analog data tones, but
>sometimes analog DV tones. Audio codec in the radio, codec driver in the
>PC. USB cable in between. Works very well.

But you are NOT passing analog audio down the USB cable. You're
passing digital PCM to a USB sound device built into the
radio. Semantics are important in this discussion, and my point
still stands, there are no analog signals around a DV Dongle, just an
AMBE coded bitstream and a PCM bitstream (plus commands to the dongle
and status/responses back).

73 de VK3JED / VK3IRL
http://vkradio.com