"Ken Koster" <n7ipb@...> wrote: Ken's notes & systemd service file are published here: https://github.com/nwdigitalradio/n7nix/tree/master/vnc Thanks Ken! /Basil n7nix

The 2 Emacs editors are essential to me as my fingers are wired that way. 'whois' is handy for debugging some network problems. All small programs. rsync is important for getting files on & off your d

... Tune your radio to 144.39. The 2M APRS frequency. That should give you some traffic. Correct, thanks for pointing that out. So if you are a Winlink newbie, just hit return for password & follow th

It sounds like PTT control is not working. What radio are you using? Which cable are you using, mini-din6 or the HD15? Did you make the cable or buy it? Tune your radio to some unused simplex frequenc

Hi Peter, Edit /etc/direwolf.conf For both Channel 0 & Channel 1 change the line that reads: modem 1200 to modem 9600 Now restart direwolf by: cd /home/pi/bin sudo su ./ax25-stop ./ax25-start Check st

The following brings the udrc driver modules back after an apt-get upgrade: apt-get remove udrc-dkms apt-get install udrc-dkms /Basil

Linux RMS Gateway will be supported and will continue to work. /Basil n7nix

For most linux platforms: paclink-unix https://github.com/nwdigitalradio/paclink-unix pat http://getpat.io/ pigate http://www.pigate.net/ linbpq You have choices. Full disclosure, I'm one of the maint

Scott Currie <scott.d.currie@...> writes: Yep. If you just want messaging then the options I mentioned will work if you need to use Winlink Express features then go with Windows. You could use y

Scott Currie <scott.d.currie@...> writes: Yes my apologies if anyone thought I was promoting that. You can NOT run WE or most/any windows apps on an ARM platform under wine. I am not a fan of wi

It appears that is not the case. RMS Gateway upgrade notes for new Winlink Web Services https://groups.yahoo.com/neo/groups/LinuxRMS/conversations/messages/2775 /Basil n7nix

Not really a mistake if you use the superior SunFounder 7" monitor (1024x600) which would have the HAT cables come out the top. https://www.amazon.com/SunFounder-Inch-Monitor-HDMI-Raspberry/dp/B073GYB

I gave the wrong url for the Sunfounder displays that I've used. These are the correct urls for the 7" & 10" LCD displays. https://www.sunfounder.com/7-inch-hdmi-lcd.html https://www.sunfounder.com/10

Hi Bernard, Understand that compass is raspbian is Debian. Please ssh into your target machine & cut & paste text rather than attaching screen shots, then you can show us more information from the pan

Curt, WE7U <curt.we7u@...> writes: When I bring up an AX.25 machine I always install iptables & block the following 3 addresses on both ax0 & ax1 interfaces. I noticed these addresses being broa

If you use the current beta image for draws the dtoverlay is set up properly. http://nwdig.net/downloads/ /Basil

#accessory #draws #adc

The DRAWS image starts with a compass image and adds other HAM programs. See "Table of Installed Programs" at this link for a list of those programs: https://github.com/nwdigitalradio/n7nix/blob/maste

I am in agreement with you Dave. The 7" Raspberry Pi 800 x 480 resolution touchscreen screens are much too small for most (any) apps to work without a great deal of frustration. The 7" Sunfounder 1024

Jack Spitznagel <kd4iz@...> writes: The display is a 12V display. It also has a speaker so you can use Xastir audio alerts without having an external speaker. The RPi with DRAWS hat attach to th

John, It might not be obvious but you want to start with 'Getting Started' page from the udrc wiki. https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started /Basil john.chabalko@...

#draws #pidrive