|
DRAWS™ Boards now shipping
#draws
New post on NW Digital Radio DRAWS Shipping Status: by k7udr As of today all backorders have been filled on DRAWS Boards. We now have 30 boards IN STOCK! We have started a new run so we should have st
New post on NW Digital Radio DRAWS Shipping Status: by k7udr As of today all backorders have been filled on DRAWS Boards. We now have 30 boards IN STOCK! We have started a new run so we should have st
|
By
John D Hays - K7VE
· #2624
·
|
|
Compact GPS antenna?
#draws
#gps
I’m experimenting with one. See link https://nw-digital-radio.groups.io/g/main/topic/compact_gps_antenna_and/32674071?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,32674071
I’m experimenting with one. See link https://nw-digital-radio.groups.io/g/main/topic/compact_gps_antenna_and/32674071?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,32674071
|
By
K4SPB
· #2581
·
|
|
SECOND Request Re: [nw-digital-radio] [New post] Shipping Status Update
#draws
#case
#shipping
Ok but early adopters have old hats and old pis so where are those cases
Ok but early adopters have old hats and old pis so where are those cases
|
By
K4SPB
· #2556
·
|
|
New 3D print case design for DRAWS
#draws
#case
I'm still holding tight for the metal case I ordered.
I'm still holding tight for the metal case I ordered.
|
By
Dave Phelps
· #2550
·
|
|
New 3D print case design for DRAWS
#draws
#case
Absolutely.
By
John D Hays - K7VE
· #2549
·
|
|
New 3D print case design for DRAWS
#draws
#case
The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry. Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and I t
The Pi 4 version as well as an Anderson Plug version are now updated in the same thingiverse entry. Personally i’m not updating my DRAWS to the new Pi 4 for some time, don’t really need it yet and I t
|
By
vk2psf@...
· #2548
·
|
|
New 3D print case design for DRAWS
#draws
#case
There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat. We don't have numbers, but reports are
There may be thermal considerations for a Rpi 4 -- so report back when you try one. Metal cases are better than acrylic or plastic for helping dissipating heat. We don't have numbers, but reports are
|
By
John D Hays - K7VE
· #2547
·
|
|
New 3D print case design for DRAWS
#draws
#case
Thanks, VK2PSF .... 73, WB7DFV
Thanks, VK2PSF .... 73, WB7DFV
|
By
WB7DFV
· #2546
·
|
|
New 3D print case design for DRAWS
#draws
#case
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right. https://www.thingiverse.com/thing:3333435
Here is a link to the "OLD" design by N0KZ. I haven't built it but it looks right. https://www.thingiverse.com/thing:3333435
|
By
vk2psf@...
· #2545
·
|
|
Compact GPS antenna?
#draws
#gps
Search for a Taoglas TG.08. It's passive, so you may need to make sure you have good LOS to the sky, but at least the antenna doesn't have a long whip on it. Steve KC1AWV
Search for a Taoglas TG.08. It's passive, so you may need to make sure you have good LOS to the sky, but at least the antenna doesn't have a long whip on it. Steve KC1AWV
|
By
Steve KC1AWV
· #2544
·
|
|
Compact GPS antenna?
#draws
#gps
Taking my DRAWS on the road for the first time this weekend, and I was thinking it'd be nice to have a compact GPS antenna to save myself from having to cart the antenna and long feed line I use at ho
Taking my DRAWS on the road for the first time this weekend, and I was thinking it'd be nice to have a compact GPS antenna to save myself from having to cart the antenna and long feed line I use at ho
|
By
Chris Metcalf
· #2543
·
|
|
New 3D print case design for DRAWS
#draws
#case
+1 for that Alex. If you have a case with power pole out the back and GPS out the side I want one!
+1 for that Alex. If you have a case with power pole out the back and GPS out the side I want one!
|
By
Ryan W Leathers
· #2542
·
|
|
WinMor or ARDOP operation with Pi HAT and Pi3+
#draws
Hi Jim As far as I know, Winmor is Windows only (for now) I have done some quick tests with the PAT Winlink client over Ardop. Should work. My tests was with a FT817. This video could give you some he
Hi Jim As far as I know, Winmor is Windows only (for now) I have done some quick tests with the PAT Winlink client over Ardop. Should work. My tests was with a FT817. This video could give you some he
|
By
LA9KOA - Karl
· #2541
·
|
|
New 3D print case design for DRAWS
#draws
#case
Alex, Nice design. Did you have one for the original DRAWS with the GPS port in the side and the power out of the end? I would be very interested in checking that out if you had it. Ed Bloom, KD9FRQ e
Alex, Nice design. Did you have one for the original DRAWS with the GPS port in the side and the power out of the end? I would be very interested in checking that out if you had it. Ed Bloom, KD9FRQ e
|
By
Ed Bloom, KD9FRQ
· #2540
·
|
|
New 3D print case design for DRAWS
#draws
#case
Nice work Alex, will you be doing one for the Pi4?
Nice work Alex, will you be doing one for the Pi4?
|
By
...
· #2539
·
|
|
New 3D print case design for DRAWS
#draws
#case
I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back. https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a rep
I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back. https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a rep
|
By
vk2psf@...
· #2538
·
|
|
SECOND Request Re: [nw-digital-radio] [New post] Shipping Status Update
#draws
#case
#shipping
As previously mentioned, updates will be provided when we have solid information on when the manufacturer will be able to deliver. We have gone through some revisions, and the layout of the new Pi 4 r
As previously mentioned, updates will be provided when we have solid information on when the manufacturer will be able to deliver. We have gone through some revisions, and the layout of the new Pi 4 r
|
By
John D Hays - K7VE
· #2537
·
|
|
SECOND Request Re: [nw-digital-radio] [New post] Shipping Status Update
#draws
#case
#shipping
Is there any date for shipping of the cases? My previous email to the group has went unanswered for two weeks. -- Dave Slotter, W3DJS
Is there any date for shipping of the cases? My previous email to the group has went unanswered for two weeks. -- Dave Slotter, W3DJS
|
By
Dave Slotter, W3DJS
· #2536
·
|
|
WinMor or ARDOP operation with Pi HAT and Pi3+
#draws
Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D? Thank you! Jim WA9PYH
Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D? Thank you! Jim WA9PYH
|
By
...
· #2535
·
|
|
[New post] Shipping Status Update
#shipping
#draws
#case
Hi, Is there any date for shipping of the D.R.A.W.S. aluminum cases yet? I was hoping to have one by Field Day, as I brought my Raspberry Pi with D.R.A.W.S. hat to FD, naked, because no case had arriv
Hi, Is there any date for shipping of the D.R.A.W.S. aluminum cases yet? I was hoping to have one by Field Day, as I brought my Raspberry Pi with D.R.A.W.S. hat to FD, naked, because no case had arriv
|
By
Dave Slotter, W3DJS
· #2527
·
|