Looks good John,

I’m returning your original board because it has the 15 Pin Connector you need.

Bryan

On Jan 21, 2019, at 2:30 PM, John MacDonald <john@...> wrote:

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, January 21, 2019 12:14 PM, Bryan Hoyer <bhhoyer@...> wrote:

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:

So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?

There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?

John MacDonald, K4BR

706-466-5646

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@... wrote:

Looks like end of Jan first of Feb at this point.

Thanks,

Bryan K7UDR

<Netgear7800-portforwarding-January2019.JPG><Netgear7800-UDRC_router_settings-january2019.pdf>

On Jan 21, 2019, at 2:30 PM, John MacDonald <john@...> wrote:

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald




‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 12:14 PM, Bryan Hoyer <bhhoyer@...> wrote:

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@... wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@... wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR

<Netgear7800-portforwarding-January2019.JPG><Netgear7800-UDRC_router_settings-january2019.pdf>

Okay, Bryan...

I hope all of the info you need is attached - One .pdf file and one .jpg file.

Please let me know if you need additional info.

Are you going to send an "old" UDRC or one of the new boxes?

John MacDonald

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 12:14 PM, Bryan Hoyer bhhoyer@gmail.com wrote:

Yes John.
I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.
Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@k4br.com wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@gmail.com wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR

Yes John.

I just need to figure out why your UHF Machine works without port forwarding and you need to give me the IP address of the existing machine so the new one can reference it.

Bryan

On Jan 21, 2019, at 8:59 AM, John MacDonald john@k4br.com wrote:
So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?
There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?
John MacDonald, K4BR
706-466-5646
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer bhhoyer@gmail.com wrote:

Looks like end of Jan first of Feb at this point.
Thanks,
Bryan K7UDR

On Jan 21, 2019, at 8:59 AM, John MacDonald <john@k4br.com> wrote:

So, Brian, am I finally going to get a working version of the UDRC or ??? and a case for 145.23 MHz?

There is nothing in my netgear NightHawk router mentioning either UDRC. Do I need to add something?

John MacDonald, K4BR
706-466-5646



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, January 21, 2019 11:28 AM, Bryan Hoyer <bhhoyer@gmail.com> wrote:

Looks like end of Jan first of Feb at this point.

Thanks,
Bryan K7UDR

Looks like end of Jan first of Feb at this point.

Thanks,
Bryan K7UDR