Date
1 - 3 of 3
Audio Debug?
Steve McGrane <temporarilyoffline@...>
I'm not getting what I think would be the right audio in/out from the DRAWS. I've tried a second cable and the second port. I get some input, but not 100% and I get no output in FT8 or JS8Call. When I'm in FLDIGI, I get no waterfall, but I can hit the tuner function and it will transmit a tuning sound and my remote signal strength meter registers TX as well. Is there anyway to run a command and get some test output? Regards, - Steve
|
|
Is there anyway to run a command and get some test output?To output an audio tone on either the left or right draws connector use the measure_deviate.sh script. Documentation here: https://github.com/nwdigitalradio/n7nix/tree/master/deviation Script here: n7nix/deviation/measure_deviate.sh Also run: alsa-show.sh Do these settings match the radio you are using? ie. did you use John's web based draws-manager? /Basil Steve McGrane <temporarilyoffline@gmail.com> writes: I'm not getting what I think would be the right audio in/out from the
|
|
Steve McGrane <temporarilyoffline@...>
I had to re-run my setalsa-ft891.sh script and that reset the levels to something working. Been a while since I touched that.
On Tue, Jun 11, 2019 at 5:04 PM Basil Gunn <basil@...> wrote:
|
|