Date
1 - 5 of 5
windv and windows 10
kc1id@...
I had trouble with the beta version of windv crashing every time I opened it up.
I had installed it on a new windows install. I solved the problem as follows: 1. Pull the dongle out of the USB port and start up windv. ( If your issue is the same as mine it should start up ok ) 2. Go into your settings and make sure the baud rate is set correctly. ( It should be 4xx,xxx ... Something ... Look it up ) 3. Shut the program down with the new settings. 4. Plug in your dongle and restart. Everything should work great. Jim Sent via the AT&T TREK™ 2 HD a 4G LTE tablet
|
|
Martin Hennessey
Hi Guys There is now a Blue DV program BETA version that supports thumb Dv for Dstar may be bit easier to use on Windows 10 73 M0MBV
On 29 May 2017 01:49, "Kc1id" <kc1id@...> wrote: I had trouble with the beta version of windv crashing every time I opened it up.
|
|
gw02639
hi thank you for the info i
did what you told me to and it
work thank you but what i am
getting now when i ptt it tell
me this invald rpt1 gw0fjq
gw0fjq alun 73
In a message dated 29/05/2017 02:21:25 GMT Daylight Time,
ferret10987654321@... writes:
|
|
leslie norton <gm4jnw@...>
I have been trying to help Alun out since i sold him the dongle, never had problems with Win7 or Mac (buster) and not used Win10 but as your suggestion is to use an early version which was written for the blue dongle, would that work with Win10
toggle quoted messageShow quoted text
I guess if so the best version would be V1.04 Would this work, has it been tested with Win10?
|
|
Kc1id <kc1id@...>
Is there any chance that a Linux build of the Blue DV program will be forthcoming at some point?
Sent via the AT&T TREK™ 2 HD a 4G LTE tablet
|
|