What's in a name?
"John D. Hays" <john@...>
Have you ever thought about product names? It's kind of important. A good name will identify a product in such a way that the observer is quick to understand the purpose of the product.
We have been thinking about the changes in the UDR56k-4 since it's first introduction. At the time we had identified that the radio would be limited to a top data rate of 56 kbits. This was in part due to the limitations of the modem/RF chip in our original design. We have since changed our architecture into an I/Q Software Defined Modem (SDM) and will be delivering a modem that will likely exceed 100 kbits.
Steve, WA7PTM, contacted us and suggested we consider renaming the UDR56k-4 to reflect those changes and indicated we had a great resource --> the UniversalDigitalRadio Yahoo! Group. We thought this was a great idea, thanks Steve.
We had been thinking about a model name change, but we thought Steve's suggestion was a great opportunity. So, if you have a suggestion of what we should use for the name/model of the radio, here's your chance to change the destiny of all mankind :)
Please post your ideas. Some guidelines:
We will review your suggestions, and others developed in house. If there are several particularly good suggestions, we will create a survey where you can vote for your favorite.
We reserve the right to use any or none of the suggestions. All suggestions become donated property of NW Digital Radio, without compensation. We will acknowledge the person or persons who came up with the chosen name.
|
|
Mark L Friedlander <marklfriedlander@...>
UDR100 is already taken. Besides, why limit the speed in the name? As time progresses, faster models may become available. How about the HSUDR-1 for High Speed Universal Digital Radio version 1? Mark KV4I
On Wed, Nov 20, 2013 at 11:43 AM, John D. Hays <john@...> wrote:
|
|
Steve <yahoo-udr@...>
Incorporate the band, not the speed, into the model name.
On the current product, this might be: UDR4 (70cm, 420-450MHz band) Future products (we hope you folks will come up with) could be: UDR2 (125cm, 222-225MHz band) UDR9 (33cm, 902-928MHz band) And FWIW: An Internet search will typically bring up a similar name no matter what you call it.
|
|
Marshall Denny <MarshallDenny@...>
That is exciting news. Using I/Q Software Defined Modem (SDM) could yield a very flexible platform.Even something simple like adding CW to the radio would be nice. It would be great to add SSB level sensitivity to an ultra robust mode like Olivia on UHF would be fun. -- Respectfully, W. Marshall Denny II Software Development Engineer 206 734 9242 cell Far and away the best prize that life has to offer is the chance to work hard at work worth doing.
Theodore Roosevelt
|
|
Rick Edwards <threepalms@...>
Hmmm...
toggle quoted messageShow quoted text
How about something like: "UDRIICL" Meaning "Universal Digital Radio Information Infrastructure Communications Link". Or...."UDR too cool" in slang. :) K6TVI - Rick
On 11/20/2013 8:43 AM, John D. Hays
wrote:
|
|
John Habbinga <kc5zrq@...>
I'll suggest UDR0NE.
UDR0NE
It shouldn't.
It should be easy to optimize this for a Google search. Currently returns are pretty mundane and have inconsistent results.
Check!
Hmm. You can read the word drone in the name. That's kind of a buzz word.
UDR for Universal Digital Radio. 0NE means one, 1 or first. I included the zero because udrone is already registered and having the "0" in place of "o" alludes to the digital nature of the product. I registered udr0ne.com and you can have it if you choose the name.
|
|
Bill Vodall <wa7nwp@...>
If I/Q is available over the network - won't that let us use any of the existing HPSDR software out of the box with the UDRax? (Amateur eXperiemntal) Bill, WA7NWP
|
|
Nate Bargmann <n0nb@...>
* On 2013 20 Nov 12:57 -0600, John Habbinga wrote:
I'll suggest UDR0NE.That works until someone transposes it as URD0NE! 73, de Nate >> -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Ham radio, Linux, bikes, and more: http://www.n0nb.us
|
|
"qrv@..." <qrv@...>
I like UDigRadio2 ... a retro name? ;-)
toggle quoted messageShow quoted text
* On 2013 20 Nov 12:57 -0600, John Habbinga wrote:I'll suggest UDR0NE.That works until someone transposes it as URD0NE! --
Thanks! & 73, KD4E.com David Colburn - Nevils, Georgia USA Search with: duckduckgo.com Android for Hams: groups.yahoo.com/group/hamdroid Creative Tech: groups.yahoo.com/group/ham-macguyver Raspi Alternative: groups.yahoo.com/group/beagleboneblack/ Restored to design-spec at Heaven's gate 1Cor15:22
|
|
John Habbinga <kc5zrq@...>
>That works until someone transposes it as URD0NE! That is funny! (I just registered that one too)
|
|
jimbo <jimbo10987@...>
"RAD1" Radio All Digital 1
On Wed, Nov 20, 2013 at 4:28 PM, qrv@... <qrv@...> wrote:
|
|
bhhoyer@...
I'm not sure what to do when GOD gives you a name ---In universaldigitalradio@..., <jimbo10987@...> wrote: "RAD1" Radio All Digital 1
|
|
bhhoyer@...
So how do you say Stinky Eel in Tongan? Check out Coca Cola in Chinese http://en.wikipedia.org/wiki/Brand_blunder ---In UniversalDigitalRadio@..., <john@...> wrote: Have you ever thought about product names? It's kind of important. A good name will identify a product in such a way that the observer is quick to understand the purpose of the product.
We have been thinking about the changes in the UDR56k-4 since it's first introduction. At the time we had identified that the radio would be limited to a top data rate of 56 kbits. This was in part due to the limitations of the modem/RF chip in our original design. We have since changed our architecture into an I/Q Software Defined Modem (SDM) and will be delivering a modem that will likely exceed 100 kbits.
Steve, WA7PTM, contacted us and suggested we consider renaming the UDR56k-4 to reflect those changes and indicated we had a great resource --> the UniversalDigitalRadio Yahoo! Group. We thought this was a great idea, thanks Steve.
We had been thinking about a model name change, but we thought Steve's suggestion was a great opportunity. So, if you have a suggestion of what we should use for the name/model of the radio, here's your chance to change the destiny of all mankind :)
Please post your ideas. Some guidelines:
We will review your suggestions, and others developed in house. If there are several particularly good suggestions, we will create a survey where you can vote for your favorite.
We reserve the right to use any or none of the suggestions. All suggestions become donated property of NW Digital Radio, without compensation. We will acknowledge the person or persons who came up with the chosen name.
|
|
Mickey Baker <fishflorida@...>
> I'm not sure what to do when GOD gives you a name
toggle quoted messageShow quoted text
Choose to accept it on faith or suspect that the vanity call system is at work....
On Thursday, November 21, 2013, wrote:
-- Mickey Baker, N4MB Fort Lauderdale, FL “Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” Teton Lakota, American Indian Saying.
|
|
Steve <yahoo-udr@...>
Tongan language translation is not available at http://translate.google.com
toggle quoted messageShow quoted text
Using the handy English-Tongan dictionary on http://www.freelang.net/online/tongan.php?lg=gb ... Neither "stinky" nor "eel" are in the dictionary A "moray eel" is a "toke" "UDR" is also not in the dictionary How many pre-orders are there from locations where they speak the national language of Tonga?
---------- Original Message ----------
[ Sent by bhhoyer@... at 11/21/2013 07:58 AM ]
|
|
kg7hq@...
Maybe something to the effect of "Lithe Radio ". Lithe being flexible and graceful. I was thinking a simple and not yet used name to this peice of technical art. Michael - KG7HQ ---In UniversalDigitalRadio@..., <yahoo-udr@...> wrote: Tongan language translation is not available at http://translate.google.com Using the handy English-Tongan dictionary on http://www.freelang.net/online/tongan.php?lg=gb ... Neither "stinky" nor "eel" are in the dictionary A "moray eel" is a "toke" "UDR" is also not in the dictionary How many pre-orders are there from locations where they speak the national language of Tonga?
---------- Original Message ----------
[ Sent by bhhoyer@... at 11/21/2013 07:58 AM ] >
|
|
Brian D Heaton <ky9k-lists@...>
Something simple like UDR1-band
(UDR1-2, UDR1-4, UDR1-9, UDR1-12, etc) would both give room for
future versions of the base UDR platform, as well as, define the
supported band if a decision is made at some future date to
support additional bands via different RF boards. I'm concerned that "0" vs "o" tricks would just result in confusion down the line as folks try to type in a URL they've copied down and aren't sure which one they should use. 73-KY9K/Brian
On 11/22/2013 10:08 AM, Steve wrote:
|
|
Dean Gibson AE7Q <yahoo@...>
On 2013-11-23 06:15, Brian D Heaton
wrote:
You mean, like the people that use a slashed "oh" in representing a desired callsign in an FCC application, only to find that the FCC rejects the callsign? A slashed "oh" (a Latin letter) in place of a zero also plays havoc with blind amateurs who use screen reader applications, but we don't care about them, do we? See http://www.ae7q.net/text/Zero.php
|
|
"qrv@..." <qrv@...>
Stinky eel sounds like a fun name for a mobile whip
toggle quoted messageShow quoted text
antenna ... or maybe an end-fed antenna in a deed-restricted community? Tell them you're paying homage to an animal so they should leave you alone ... ;-)
Tongan language translation is not available at --
Thanks! & 73, KD4E.com David Colburn - Nevils, Georgia USA Search with: duckduckgo.com Android for Hams: groups.yahoo.com/group/hamdroid Creative Tech: groups.yahoo.com/group/ham-macguyver Raspi Alternative: groups.yahoo.com/group/beagleboneblack/ Restored to design-spec at Heaven's gate 1Cor15:22
|
|
Bryan Hoyer <bhhoyer@...>
Tom Hanks had a movie called "that thing you do" about a band named the oneders.
toggle quoted messageShow quoted text
The band thought it was Wonders but the crowd called them the oh-nay-ders
On Nov 23, 2013, at 9:46 AM, Dean Gibson AE7Q <yahoo@...> wrote:
|
|