main@nw-digital-radio.groups.io

Is this still alive 14

Its now more than a month ago since the last message in this group. Is this project still alive? Philip pa3dfn

By "pa3dfn" ·

UDR56K-4 First Quarter Release ? 2

An update on if the product is going to be released the first quarter of 2013 or ??? If there is going to be a delay please advise. Thanks Paul Johnson VE7DHM VARPA

By Paul Johnson ·

Q1 Update

http://nwdigitalradio.com/2013/03/q1-update/ ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twitter.com/#!/john_hays> <http://www

By "John D. Hays" ·

Forward error correction - experiment 5

I am proposing a useful experiment for this very flexible hardware for the group to consider. Testing with variable levels of FEC added to an otherwise standard ax.25 protocol. This might allow high

By "marshalldennyai4cm" ·

TX Duty Cycle

Steve, WB4IZC, asks: "What will be the TX duty cycle of the new UDR56K-4? Does this figure very between tx output powers?" The UDR56K has a substantial heat-sink designed for high duty cycle applic

By "k7udr" ·

RX & TX Ports 7

I would like to find the pros and cons on having the Independent Rx, Tx Ports: ?* *Gavin VA3XRR* *

By Scanner Groups ·

UDR Pre-Orders Now Open

http://nwdigitalradio.com/2013/03/pre-orders-are-now-being-accepted/ ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twitter.com/#

By "John D. Hays" ·

D-Star voice? 2

One thing I have never been clear on. Will this radio do RF based D-star voice mode? I know the D-star is an option like the UT-118 is for my IC-2200H. Once added can I use the computer headset for

By Ronny Julian ·

Store and forward vs Real Time access 5

Another general topic we should consider is how messages of various types and handled in digital/packet ham radio. We need a great deal more interoperability and integration in our otherwise powerful

By "marshalldennyai4cm" ·

UDR Network? 7

How long until the UDR Network map is up? I'd really like to know if there are other pre-orders in my area. I suspect there are quite a few people waiting to place their pre-order until they see some

By Tom Hayward ·

OT: Leftover from 4/1/13

Had to pass this on. Someone did a real convincing job on this! https://www.facebook.com/photo.php?fbid=10151809656242306&set=o.251183216690&type=1&relevant_count=1&ref=nf Ronny K4RJJ

By Ronny Julian ·

What works out of the box? 12

1. If I buy just one UDR w/ AMBE3000 board, what can I do with it, out of the box? Can I talk to other DV radios and repeaters? What hardware do I need? Besides the obvious control/display interfac

By Dean Gibson AE7Q ·

Multiple Applications / Modes simultaneously running on the UDR56K-4 6

General guidelines: 1. We don't have an exhaustive list of every possible combination of applications an operator might want to run. We will not be able to tell the impact of every combination that

By "John D. Hays" ·

DV3000 Add-on card? 2

Can the DV3000 Add-on card be installed by the end-user if purchased separately? --73 de N1OBU (FN41AM)

By "Douglas" ·

Winlink vs. D-STAR 7

I have noticed on the order map that a vast majority of the orders are for D-STAR. What few users we have in our area (Astoria, Oregon) are mainly Winlink. Are those who are ordering D-STAR have a use

By "jim.santee" ·

programming APIs 2

Hi, Is there already information available how to write applications for the UDR? As the c2gmsk modem (codec2 gmsk modem) has now been converted into an API, I would be interested to know if it i

By Kristoff Bonne ·

Photo of finished product. 2

Since these are now up for order, does anyone actually have a photograph of the finished radio other then the animated concept gif. Be nice to actually see one before buying one.

By "perryc" ·

UDR56K-4 current draw / fuse 13

I'm doing station power planning (West Mountain RigRunner 4012), and I note that the first set of specs said 12vDC @ 5A, but the more recent one says 6A. Questions: 1. Does that change w/ the AMBE

By Dean Gibson AE7Q ·

Power output... is it adjustable? 5

Hi Everybody, We all know the UDR56K-4 is a 25 Watt radio... but can it be turned down? There will be times when a power output of a few hundred milliwatts would be perfectly fine. Michael. VK5ZEA

By Michael Carey ·

USB Radio Interface (URI) ? 2

All, Can the URI (from DMK Engineering Inc.) work with the UDR56K-4 to provide an additional radio interface? http://www.dmkeng.com/Products.htm v/r Doug (N1OBU)

By "Douglas" ·