|
Rpi slow with draws hat
Ever since I installed my Draws hat the RPI 3b+ slowed down and it takes ages to boot and to shutdown. During booting the CPU % reaches 100% before recovering. Yesterday I was using fldigi and during
|
Ever since I installed my Draws hat the RPI 3b+ slowed down and it takes ages to boot and to shutdown. During booting the CPU % reaches 100% before recovering. Yesterday I was using fldigi and during
|
By Christopher Warren
·
|
|
New 3D print case design for DRAWS 10 messages
#draws
#case
I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back. https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a rep
|
I have aded a new case design for the DRAWS Hat (Jun-2019 edition with the GPS SMA port at the back. https://www.thingiverse.com/thing:3743033 I may look at adding power poles to it, probably as a rep
|
By vk2psf@...
·
|
|
WinMor or ARDOP operation with Pi HAT and Pi3+ 2 messages
#draws
Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D? Thank you! Jim WA9PYH
|
Has anyone operated WinMor or ARDOP sucessfully with the DRAWS Pi HAT and a Pi3+? More specifically with a FT857D? Thank you! Jim WA9PYH
|
By
wa9pyh@...
·
|
|
piardopc?
Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use? 73, Jason KM4ACK Find me on YouTube
|
Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use? 73, Jason KM4ACK Find me on YouTube
|
By km4ack
·
|
|
New Raspberry Pi 4 compatibility with DRAWS HAT 6 messages
#support
The new Raspberry PI 4 has just been released. The PI4 is a serious upgrade over the PI3B. I'm guessing and hoping that DRAWS HAT is compatible, but I would like confirmation. So, will the DRAWS HAT w
|
The new Raspberry PI 4 has just been released. The PI4 is a serious upgrade over the PI3B. I'm guessing and hoping that DRAWS HAT is compatible, but I would like confirmation. So, will the DRAWS HAT w
|
By Dreuge
·
|
|
[New post] Shipping Status Update 4 messages
#shipping
#draws
#case
k7udr posted: "We do not have a definitive ship date for Aluminum Cases yet, as a few details are being worked out. Acrylic cases are available from C4Labs here: DRAWSCase DRAWS Boards are in assembly
|
k7udr posted: "We do not have a definitive ship date for Aluminum Cases yet, as a few details are being worked out. Acrylic cases are available from C4Labs here: DRAWSCase DRAWS Boards are in assembly
|
By John D Hays - K7VE
·
|
|
DRAWS Video #4 6 messages
Its been a while, but now that my radio is back from factory service, I got the kick in the pants I needed to make another video. This video is all about how to make a bootable backup of your SD card
|
Its been a while, but now that my radio is back from factory service, I got the kick in the pants I needed to make another video. This video is all about how to make a bootable backup of your SD card
|
By
Steve McGrane
·
|
|
New to Linux/Unix? 2 messages
#linux
#commands
Here is a cheatsheet to get you started. https://files.fosswire.com/2007/08/fwunixref.pdf -- John D. Hays Director
|
Here is a cheatsheet to get you started. https://files.fosswire.com/2007/08/fwunixref.pdf -- John D. Hays Director
|
By John D Hays - K7VE
·
|
|
Audio Debug? 3 messages
I'm not getting what I think would be the right audio in/out from the DRAWS. I've tried a second cable and the second port. I get some input, but not 100% and I get no output in FT8 or JS8Call. When I
|
I'm not getting what I think would be the right audio in/out from the DRAWS. I've tried a second cable and the second port. I get some input, but not 100% and I get no output in FT8 or JS8Call. When I
|
By
Steve McGrane
·
|
|
MMDVM & UDRC 22 messages
Hi Folks I’ve been busy working on some new bits of software. Both of them target the UDRC on a Raspberry Pi as a platform, and offer some interesting new avenues for experimentation. Firstly I ported
|
Hi Folks I’ve been busy working on some new bits of software. Both of them target the UDRC on a Raspberry Pi as a platform, and offer some interesting new avenues for experimentation. Firstly I ported
|
By Jonathan Naylor
·
|
|
Why Do I get a "Windows" type GUI after a reboot?? 4 messages
I really prefer the basic GUI and for no reason a boot will cause the darn "windows" type one to pop up!
|
I really prefer the basic GUI and for no reason a boot will cause the darn "windows" type one to pop up!
|
By Allen Lee
·
|
|
Cable For IC-7610 to DRAWS 2 messages
Trying to find a cable to match the 8pin mini din on 7610 to 6pin din on DRAWS. Just not able to wire one myself, shake too much when soldering.
|
Trying to find a cable to match the 8pin mini din on 7610 to 6pin din on DRAWS. Just not able to wire one myself, shake too much when soldering.
|
By Allen Lee
·
|
|
How to bring "down" PTT? 8 messages
I'm chasing this PTT issue on my 2m unit and I'm not sure where to go from here. I'm out of parts or ideas or both. The DRAWS hat will signal PTT and the radio will open transmit and send as it is sup
|
I'm chasing this PTT issue on my 2m unit and I'm not sure where to go from here. I'm out of parts or ideas or both. The DRAWS hat will signal PTT and the radio will open transmit and send as it is sup
|
By
Steve McGrane
·
|
|
Pi Juice Hat
I didn't see this when searching the archives... I have a bad habit of turning off my PS without shutting down the Pi... the thing is so quiet that I forget that its running. Would the DRAWS supplying
|
I didn't see this when searching the archives... I have a bad habit of turning off my PS without shutting down the Pi... the thing is so quiet that I forget that its running. Would the DRAWS supplying
|
By
Steve McGrane
·
|
|
udrc-dkms fails to install after updating system/kernel 7 messages
#udrc-dkms #dkms #rpi udrc-dkms fails to install after updating system/kernel as seen below. 73 de AI6KG pi@draws:~ $ sudo apt update Hit:1 http://archive.compasslinux.org cedar InRelease Hit:2 http:/
|
#udrc-dkms #dkms #rpi udrc-dkms fails to install after updating system/kernel as seen below. 73 de AI6KG pi@draws:~ $ sudo apt update Hit:1 http://archive.compasslinux.org cedar InRelease Hit:2 http:/
|
By Christopher AI6KG
·
|
|
Good 2m rig? SkyCommand 060119
Include evaluation of the Kenwood Dual / Tri Band SkyCommand radios. They allow you to use a Kenwood Walkie Talkie with a built in TNC, to digitally link to a remote Kenwood Dual Band radio with a TNC
|
Include evaluation of the Kenwood Dual / Tri Band SkyCommand radios. They allow you to use a Kenwood Walkie Talkie with a built in TNC, to digitally link to a remote Kenwood Dual Band radio with a TNC
|
By WD8ARZ
·
|
|
Good 2m rig? 30 messages
Is there a list of known compatible (or at least community aware working) radios? My FT-891 is working fine on the HF side of things (should be back any day now) and I'm working on my TM-281, but I'm
|
Is there a list of known compatible (or at least community aware working) radios? My FT-891 is working fine on the HF side of things (should be back any day now) and I'm working on my TM-281, but I'm
|
By
Steve McGrane
·
|
|
Using a PiDrive with Draws Hat 16 messages
#draws
#pidrive
I wanted to use my PiDrive as it is already setup as my access point and dhcp server to my ham shack on wheels. I plugged the hat in and hooked up an external 12 volt source. When I powered it up it g
|
I wanted to use my PiDrive as it is already setup as my access point and dhcp server to my ham shack on wheels. I plugged the hat in and hooked up an external 12 volt source. When I powered it up it g
|
By okiejim
·
|
|
2m rig Update 14 messages
IT WORKS! (so far) With my makeshift TM-281 cable I was able to receive an APRS message sent from my potatofeng using the APRS-K2 cable plugged into my android. Next I have to send a message from my 2
|
IT WORKS! (so far) With my makeshift TM-281 cable I was able to receive an APRS message sent from my potatofeng using the APRS-K2 cable plugged into my android. Next I have to send a message from my 2
|
By
Steve McGrane
·
|
|
Draws hat
#draws
It would be nice to have a little more information on shipping dates, and order status
|
It would be nice to have a little more information on shipping dates, and order status
|
By Rob Lapham
·
|
