|
My DRAWS arrived, video inside
https://youtu.be/u6wz2kZJ5Vo The wiki page is worth 30 words (I counted)... and a picture is worth 1000 words so they say, then this video must be worth at least 1030 words. So here are my 1030 words
|
https://youtu.be/u6wz2kZJ5Vo The wiki page is worth 30 words (I counted)... and a picture is worth 1000 words so they say, then this video must be worth at least 1030 words. So here are my 1030 words
|
By
Steve McGrane
·
|
|
DRAWS™ Shipping Schedule 14 messages
#draws
#shipping
k7udr posted: "Components are in and we have a 5 day assembly turn scheduled for March 8th. We will begin shipping by order date, the week of the 11th and should have all backorders shipped by the 15t
|
k7udr posted: "Components are in and we have a 5 day assembly turn scheduled for March 8th. We will begin shipping by order date, the week of the 11th and should have all backorders shipped by the 15t
|
By John D Hays - K7VE
·
|
|
Installing draws image 17 messages
I am stuck. I have gotten to the point of installing it via command line, but it just keeps saying that the card is a directory. Here is the command: dd bs=4M if=draws_beta9.img of=/media/pi/8B6D-99CF
|
I am stuck. I have gotten to the point of installing it via command line, but it just keeps saying that the card is a directory. Here is the command: dd bs=4M if=draws_beta9.img of=/media/pi/8B6D-99CF
|
By Douglas
·
|
|
what is DRAWS? 5 messages
Where do I find out what this “Draws” is all about? Stan, WA2UET Virus-free. www.avast.com
|
Where do I find out what this “Draws” is all about? Stan, WA2UET Virus-free. www.avast.com
|
By Stanley Engel
·
|
|
#accessory Post Mounting Screw 3 messages
#accessory
I just received my DRAWS board and am looking forward to getting it on the air. I appreciate having two mounting posts installed on the board. BUT I'm disappointed that two $.05 mounting screws for fi
|
I just received my DRAWS board and am looking forward to getting it on the air. I appreciate having two mounting posts installed on the board. BUT I'm disappointed that two $.05 mounting screws for fi
|
By Kilgore
·
|
|
[New post] Sample Cases Have Arrived for DRAWS™ Workstation 9 messages
k7udr posted: "The DRAWS Workstation Case We are excited to give you a preview of the new DRAWS Workstation with it's beautiful red and black anodized aluminum case. We have received our first manufac
|
k7udr posted: "The DRAWS Workstation Case We are excited to give you a preview of the new DRAWS Workstation with it's beautiful red and black anodized aluminum case. We have received our first manufac
|
By John D Hays - K7VE
·
|
|
[New post] DRAWS™ Turnkey Units 4 messages
k7udr posted: "We're just back from the Excellent MicroHAMs conference in Redmond WA. The aluminum cases and full turnkey units will be available for purchase on April 15th, shipping by Dayton Hamvent
|
k7udr posted: "We're just back from the Excellent MicroHAMs conference in Redmond WA. The aluminum cases and full turnkey units will be available for purchase on April 15th, shipping by Dayton Hamvent
|
By John D Hays - K7VE
·
|
|
[udrc] [nw-digital-radio] [New post] DRAWS™ Turnkey Units 2 messages
Hello John, Not intending to ‘jump the gun’ here but for those of us who have been waiting for the ’turnkey units’ (for circa $300), when they are ‘announced’, is there a list I ‘ll be able to put mys
|
Hello John, Not intending to ‘jump the gun’ here but for those of us who have been waiting for the ’turnkey units’ (for circa $300), when they are ‘announced’, is there a list I ‘ll be able to put mys
|
By Daniel Sohn
·
|
|
newbie question 11 messages
#draws
My draws hat came in the mail today. Where do i put the sd card for the hat itself? Thanks
|
My draws hat came in the mail today. Where do i put the sd card for the hat itself? Thanks
|
By Douglas
·
|
|
Installing draws image concerns 3 messages
Hello Douglas & all, I may have missed parts of this discussion which will make what I suggest below seem really stupid…. Is there any way you can use a Windows PC or a Mac and an open source SD card
|
Hello Douglas & all, I may have missed parts of this discussion which will make what I suggest below seem really stupid…. Is there any way you can use a Windows PC or a Mac and an open source SD card
|
By Daniel Sohn
·
|
|
New Case for RPi, DRAWS and 7 inch LCD - Looking for testers 26 messages
Hello, VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the n
|
Hello, VE7KGV and I designed a case to allow use of the DRAWS Hat with a Raspberry Pi and 7 inch LCD but have no way to test it because we haven't gotten a DRAWS board to play with (Hopefully in the n
|
By Steve Goyette
·
|
|
Can't change Blue DV Settings on Win 10 6 messages
#bluedv
#thumbdv
#support
I use a Thumb DV with Blue DV on Win 10. I Haven't been able to change settings for months. Every time I try I get an "Unhandled Error" message. I've tried re-installing. No luck. Uninstalling does no
|
I use a Thumb DV with Blue DV on Win 10. I Haven't been able to change settings for months. Every time I try I get an "Unhandled Error" message. I've tried re-installing. No luck. Uninstalling does no
|
By Alan Singer
·
|
|
Draws Analog to digital transcoding 10 messages
#draws
Hi All Has anyone successfully used the Draws board with the Ambe 3000usb to create an Analog to Digital interface? I'm wanting to create a means of trans-coding digital to analog and Analog back to d
|
Hi All Has anyone successfully used the Draws board with the Ambe 3000usb to create an Analog to Digital interface? I'm wanting to create a means of trans-coding digital to analog and Analog back to d
|
By N9UMJ
·
|
|
Why the Pi?
The Pi is mainstreaming -- https://www.forbes.com/sites/parmyolson/2019/03/10/how-sony-sped-up-a-factory-with-these-tiny-35-computers/#634e6bd37d20 -- John D. Hays Director
|
The Pi is mainstreaming -- https://www.forbes.com/sites/parmyolson/2019/03/10/how-sony-sped-up-a-factory-with-these-tiny-35-computers/#634e6bd37d20 -- John D. Hays Director
|
By John D Hays - K7VE
·
|
|
DRAWS Image 7 messages
The DRAWS image starts with a compass image and adds other HAM programs. See "Table of Installed Programs" at this link for a list of those programs: https://github.com/nwdigitalradio/n7nix/blob/maste
|
The DRAWS image starts with a compass image and adds other HAM programs. See "Table of Installed Programs" at this link for a list of those programs: https://github.com/nwdigitalradio/n7nix/blob/maste
|
By Basil Gunn
·
|
|
#bluedv #thumbdv #dmr question 3 messages
#bluedv
#thumbdv
#dmr
Does anyone have info on settings in BlueDV for Windows for DMR? I can hear but can’t transmit. I did get registered and have a DMR id. Thanks wg0f Moderator Note: this belongs in the AMBE sub-group
|
Does anyone have info on settings in BlueDV for Windows for DMR? I can hear but can’t transmit. I did get registered and have a DMR id. Thanks wg0f Moderator Note: this belongs in the AMBE sub-group
|
By WG0F
·
|
|
[udrc] [New post] Sample Cases Have Arrived for DRAWS™ Workstation 3 messages
Will there be one on display at HamCation later this week? Thanks! Mike, N0SO
|
Will there be one on display at HamCation later this week? Thanks! Mike, N0SO
|
By n0so@...
·
|
|
Backorder Status 3 messages
Perhaps more appropriate for private email? http://nwdigitalradio.com/contact/ Steve Stroh (personal / general): stevestroh@...
|
Perhaps more appropriate for private email? http://nwdigitalradio.com/contact/ Steve Stroh (personal / general): stevestroh@...
|
By Rschiff1960@...
·
|
|
DRAWS™ Update
http://nwdigitalradio.com/drawstm-shipping-update/ -- John D. Hays Edmonds, WA K7VE
|
http://nwdigitalradio.com/drawstm-shipping-update/ -- John D. Hays Edmonds, WA K7VE
|
By John D Hays - K7VE
·
|
|
delevery date 9 messages
#draws
Hi, I would like to know the delivery date for draws hat? best regards Laurent
|
Hi, I would like to know the delivery date for draws hat? best regards Laurent
|
By mary laurent
·
|
