I personally don’t use the built on Ethernet. I’ve found in multiple setups (different network switches and Ethernet cables both shielded and not) where it caused more RFi. My APRS iGate I’ve got home

does it matter if you use a Pi 3B or B+ with the draws hat?

Sorry, I've been kind of slow keeping up with the DRAWS thing. From a quick scan, I see that it interfaces with two radios, has built in GPS and can do digital with any Linux software that will run on

Photos and Images/Gallery of DRAWS board, projects and more Link To My DRAW Gallery Here 73!! David (KG5EIU) #Photo

To Jonathan Naylor via Groups.Io <naylorjs@...> Hi Jonathan, I contact you through nw-digital-radiogroups for the reason that we are facing a kernel panic while using ROSE kernel module. I am glad to

Given the sold-out popularity of both the UDRC and the DRAWS, and given the functionality and cost differences between the two, is there any possibility that NWDR would consider producing both product

Hi Annaliese, Let me introduce myself first. I have been maintaining ham radio application under Linux for two decades, linfbb and FPAC. I am also contributing occasionally to Linux net modules AX25 a

I'm curious about NWDR's take on the Raspberry Pi 3 Model A+ that was recently announced. I'm curious if the form factor (lower profile) of the 3 A+ is compatible with DRAWS? Would the 512K of RAM on

I am not very familiar with Linux, and don't know if I should order the "early adopter" DRAWS board, or wait for the complete DRAWS Workstation, with the pre-configured RPi. Can you provide some info

I am new to this product, so excludes my “newbie” question. But is the DRAWS powered from the interface with the RPi or should I power with the included power leads? Tnx Lynn

Received my DRAWS hat today. Didn’t get much info - are there instructions anywhere? It did not come with a battery although it looks like it takes one? Tim

I guess I am late to the party, when is the next run for the DRAWS? 73 David

Any eta for replenishment on the draw?

Dose anyone have a link to the proper plug I need to mate with the socket on my MMDVM board for the radios. I have looked in my extra stuff and con not find to match the pin spacing.

k7udr posted: "First units arrived Saturday, and we have been testing thru the weekend. DRAWS is fully functional and we have a few minor assembly issues to resolve before shipping. " New post on NW D

It appears that is not the case. RMS Gateway upgrade notes for new Winlink Web Services https://groups.yahoo.com/neo/groups/LinuxRMS/conversations/messages/2775 /Basil n7nix

What do i need to set up my dv3000u on BlueDV . I have the software on my pc but cannot get it to connect to it on d star.

I just received and set up my ThumbDV with BlueDV software. DMR works perfectly and I love it! Dstar is another story. I can receive just fine, but for some reason when I transmit (on REF061C for exam

Does someone have a schematic for the thumbdv? If available, I would like a copy. If not , I need to know the value of a few parts.

I have been trying to connect to a local ref29a, the thumb dv says no, can connect to xrf and dcs but not ref reflector. Has anyone had this problem or knows how to fix it?