All, I would like to make something like the DV Mega dualband radio board on a R-PI using NW digital products.  What is the hardware and software requirements?  I am interested in DSTAR, C4FM and DMR

Hi there, Forgive this NOOB question, I have just received the UDRC pi-hat and a brand new Raspberry PI3. My intent is to setup a dual VHF/UHF 1200/9600 APRS igate/digipeater. I am starting wit

Does anyone have any information on the Dutch* Star Site? It's no longer available on the Web at http://dutch-star.eu/ http://dutch-star.eu/. Frank

We made an attempt to get the UDRC board working on field day. We were not able to get it to decode on the receiver. I have INCLUDED the log. If anyone has any suggestion please advise. Thanks in

Does anybody know the status of the software to allow ThumbDV to support Fusion? Thanks.

John Hays posted: "John's Presentation at Hamvention® 2016. " New post on *NW Digital Radio* <http://nwdigitalradio.com/?author=2> The $800 Tri-Mode Repeater: UDRC™ + Yaesu DR-1X <http://nwdigitalrad

New post on *NW Digital Radio* <http://nwdigitalradio.com/?author=1> Shipping Shutdown <http://nwdigitalradio.com/shipping-shutdown/> by k7udr <http://nwdigitalradio.com/?author=1> Shipping will be s

New post on *NW Digital Radio* <http://nwdigitalradio.com/?author=1> Shipping Shutdown <http://nwdigitalradio.com/shipping-shutdown/> by k7udr <http://nwdigitalradio.com/?author=1> Shipping will be s

Is there a schematic or pinout available the PiDV / DV3000? I couldn't find it on the product website.

Would it be possible to attach the PiDV board to one of the vacant headers on the UDRC to make a board capable of receiving all AMBE3000R based protocols, connecting the beast to a VHF/UHF radio such

Would it be possible to attach the PiDV board to one of the vacant headers on the UDRC to make a board capable of receiving all AMBE3000R based protocols, connecting the beast to a VHF/UHF radio such

Re: Pi3 Wireless Dongle https://nw-digital-radio.groups.io/g/udrc/message/49?p=Created,0,,20,2,0,5122735&offset=5 Re: Pi3 Wireless Dongle https://nw-digital-radio.groups.io/g/udrc/message/49?p=Creat

UDRC™ instructions -- http://nwdigitalradio.com/udrc-install-for-dr-1x -- ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twitte

NW Digital Radio is in the process of setting up various community groups at Groups.io Please create a personal account at Groups.io https://groups.io/register Join the main NW Digital group by

There is a new Wiki entry on using the UDRC™ on packet radio with the direwolf soundcard TNC <http://nwdigitalradio.com/wp-content/uploads/2016/05/xastir-on-direwolf.jpg> See: https://nw-digital-radi

It's been a few years since I played with my DV3000 and decided to put it on a newer Pi running Jessie. I found that while going through the instructions to get AMBEserverGPIO installed (method 2) th

http://nwdigitalradio.com/udrc-install-for-dr-1x/

Has anyone been able to run DMR on the nwdigital? 73, Barry K6ST https://twitter.com/barrybettman http://www.linkedin.com/in/barrybettman

What is the recommended model of the raspberrypi to work with the UDRC? Tim KK4DTT

I'm looking closely at the UDRC board to add d-star to a yeasu repeater. What is on the board to make this work? Is there a GMSK decoder on the board? or is this supposed to be done in software?