Does anyone have acopy of this software or have any idea how I can get a copy. I recently purchased the ThumbDV, watched the youtube video like 6 times and now I find out that you cannot use the softw

One of the things I'd like to do with a UDRX is run a remote 9600 packet node. I'm not sure how the 9600 baud functionality is supported within the radio but would it be possible to also load LinBPQ i

Is it possible to just use the DV3000 to vocode auduio and pass it via TCP or UDP over a network? or would it need FEC and sync bits and such.

- to be available in the very near future as previous posts have indicated testing is done - hardware to support a linux version that has good library support for all things Amateur Radio - to be ship

Some important considerations for a reliable device: 1) main board temperature (and humidity) tolerance 2) storage temperature (and humidity) tolerance 3) storage reliability RE 1 & 2: Any

Clarification on comments referenced by N8GNJ NW Digital Radio is looking at alternative “off the shelf” computer boards. The Raspberry Pi 2 is a candidate, but we are still in the investigative stag

I have a pi here, I'm very happy with it, I can run all my open source code on it without problems, I don't understand why you hate it so. in my view, a pi as the core would increase it's attractivene

Trying to set up my new thumb dv but it is not being recognized. i believe I have the driver and software installed but nothing is happening. any ideas? Dave W9DEC

In the YouTube video by Budd WB7FHC there was an selection for the Thumb Drive in the options. My setup does not have that as an option. How do I get that option? Is it because of the driver? The dev

It sure makes it easier to read the WinBook display when the Custom Display option is changed to 151%. That fills the display quite nicely! The WinDV 1.5.8 version 2 works well! Steve WB9ZNL

I received my ThumDV today and all worked very well. I tried it on Windows XP And Windows 7 Home, It was plug and play on both. Were using WinDV software which also has worked with no issues. Receiv

New post at http://wp.me/p2mAAP-qV -- ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twitter.com/#!/john_hays> <http://www.fac

Does anybody know or have tested which one of these uses less overhead on the Rpi or is there much difference between the overhead of serial over usb vs straight serial.?? -- OpenSuse Desktop (13.1

I can’t get my ThumbDV to work. Apparently, my computer cannot see it. My friends report that when they plugged their ThumbDV into a WinBook 700 it automatically installed drivers, etc. Mine did no

Has anybody run and/or tested the DV3000 running at 460.8K baud instead of 230.4K baud? I have an application for them, but need them to run at the higher data rate. Robert N5QM

Greetings all, I have a ThumbDV and just installed it this week. Due to rather skimpy documentation, it took a little while to get it working right, especially with XRF reflectors. It is doing fin

This is a good topic and deserves it's own thread. First off NW Digital Radio is a for profit corporation. We design and manufacture HW and sell it with adequate margins to keep us doing it in the f

How open/free will the platform be? Will I be able to port OpenBSD, compile all of the device drivers, and have the computer/radio run on OpenBSD instead of Linux? (Requiring GPL for some software i

--- John Hays K7VE wrote: Right. Each lower layer wraps the previous upper layer in its own header and trailer before sending. The PHY layer's header is for synchronization and error correction.

I'd like to confirm my understanding of what will be delivered with the UDRX-440. The application I'm interested in is to replace multi-access 1200/9600 baud TNC environment with multi-access 56kbp