minicom->pilinbpq->direwold->udrc-II, getting decodes but no transmit.


udrc@...
 

I am shifting gears from FLDIGI, can't get that package to work yet at all.

Thought I would try VHF BBS's in the area, my local ARES BBS in this case.

Using the default device for UDRC (not virtual sound card), I started up direwolf to create the KISS TNC port on TCP/8001. I then used pilinbpq to attach to that device at 127.0.0.1 port 8001. Then using Minicom to attach to the /tmp/com1 port as a full TNC2 port, I got my familiar CMD: promt, and started a call to the local BBS (144.990 MHz in PKT mode on the radio, 1200 Baud) K7CLL-8 is it's call.


I am delighted to see decodes, yay! Audio in is working in this mode at least. But I swear, FLDIGI was able to use teh GPIO PTT, but direwolf seems to not be able to. I get no PTT action at all.


[0.2] KC7ILK>CQ:Martin, East Mnnehaha, Vancouver, WA, USA<0x0d>
Unknown message type M

KC7ILK audio level = 87(48/39)   [NONE]   _|||||||_
[1.4] KC7ILK>CQ:Martin, East Mnnehaha, Vancouver, WA, USA<0x0d>
Unknown message type M
[0L] N7CKY-4>K7CLL-8:
[0L] N7CKY-4>K7CLL-8:
[0L] N7CKY-4>K7CLL-8:
[0L] N7CKY-4>K7CLL-8:

KB7FND-3 audio level = 0(0/0)   [NONE]   ||||||___
[0.2] KB7FND-3>BEACON:T#798,234,120,075,045,138,01110011<0x0d>
Telemetry, FIRE TRUCK
Seq=798, A1=234, A2=120, A3=75, A4=45, A5=138, D1=0, D2=1, D3=1, D4=1, D5=0, D6=0, D7=1, D8=1

KB7FND-3 audio level = 63(29/23)   [NONE]   |||||||__
[1.3] KB7FND-3>BEACON:T#798,234,120,075,045,138,01110011<0x0d>
Telemetry, FIRE TRUCK
Seq=798, A1=234, A2=120, A3=75, A4=45, A5=138, D1=0, D2=1, D3=1, D4=1, D5=0, D6=0, D7=1, D8=1

Nick




Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.