Re: minicom->pilinbpq->direwold->udrc-II, getting decodes but no transmit.


Bernard f6bvp / ai7bg
 

Hi,

When PTT is acting you should see red LED lighting on the side of activated connector either din-6 or hd15 of UDRC board. To check transmit you can use pbeacon on either channels like in sample direwolf.conf file.

Your config for PTT is gpio 23 is for din/6  (default channel or port 1).
If your wiring is on din-6 this is channel 1 ! As your config is setting channel 0 you are expecting audio input and output on hd-15 connector. 

73 de Bernard f6bvp

Envoyé de mon iPhone
Sent from my iPhone
. Started direwolf with:

ADEVICE din6
ACHANNELS 1
CHANNEL 0
MODEM 1200
MYCALL UN1X-3
PTT GPIO 23
KISSPORT 8001

......

So for this issue, when I am in standard UDRC mode and not Virtual Soundcard mode, what might have been the issue with PTT? It was set for the same pin. 

Join udrc@nw-digital-radio.groups.io to automatically receive all group messages.